Develop Bugs

Getting A2DP on Qwest PPC6700Q?

I've got a PPC 6700Q through Qwest and even thought it's on Sprint's network and is basically a Sprint phone, I can't install the AKU2 update onto it.
Can anyone point me to a way to get stereo bloothooth on this thing? [A2DP?]

Bump for help, please. ANY help at all???
Any way to get A2DP on this phone???

check out this thread from pdaphonehome.com might help: http://www.pdaphonehome.com/forums/showthread.php?t=71436
it does indicate the need for the update, but it may be worth a try anyway.
I just installed it a few minutes ago on a test phone, but have not tested as I don't have bt headphones yet.
hint: someone posted a cab in the above thread, it's several posts down on the first page.
-much luck

http://www.utstar.com/pcd/Downloads.aspx
Qwest PPC-6700 Maintenance Release
This software update makes available some new features and corrects some issues. Some of the primary enhancements are:
• Microsoft Messaging and Security Feature Pack- The Messaging & Security Feature Pack for Windows Mobile 5.0 enables business users to easily stay connected to their email while on the go and helps businesses to better protect device data. Benefits of this feature pack include:
• Direct Push Technology- Keep your Calendar, Contacts, Tasks, and Inbox up-to-date using Direct Push Technology. Plus, you can now browse your corporate address book over-the-air with Exchange 2003 SP2. Faster transfer and synchronization of data- Outlook data sent between Exchange Server and a Windows Mobile-based device is significantly compressed, enabling faster transfer and synchronization of data.
• Better protection of device data and management of devices
o Remotely enforced IT policy
o Local and remote device wipe
o Certificate-based authentication
• Enhanced security using Secure Multipurpose Internet Mail Extensions (S/MIME)
• Added a Voice Dialing application to allow you to leverage the handsfree capability already on the device.
• Main Today Screen provides you the capability to lock the device and prevent inadvertently activity.
• Corrected an issue where unknowingly, to the user, the device would enter into "Flight Mode"
*An updated User Manual is available on the UTStarcom website detailing the changes in the Maintenance Release.
PLEASE READ THE FOLLOWING INSTRUCTIONS BELOW BEFORE INSTALLING THE SOFTWARE
PPC-6700 Software Upgrade Utility Instructions
Welcome to the PPC-6700 Software Upgrade Utility. This program will take you through the installation of the software update.
Before you continue, please ensure that the following items have been completed:
**Please sync the data on your device to your PC prior to initiating this upgrade. During the upgrade all third party applications and data will be lost. Once the upgrade is complete, you can sync with your PC transfer the data back on and reinstall the applications.
1. Perform a soft reset on your device. This can be done by pressing the ‘reset’ button, with the tip of the stylus, located on the bottom of the device next to the mini USB port.
2. This upgrade requires that ActiveSync 4.1 be installed on your computer. This may be a different version than the one with which the PPC-6700 shipped. The most current version of ActiveSync is available as a free download from Microsoft at: http://www.microsoft.com/windowsmobile/downloads/activesync41.mspx
3. Close all other applications on your device and PC.
4. Download the Maintenance Release version: APAC_Qwest_20600_704_11200 to your computer. Do not attempt to run it from its current location.
5. Ensure that your device is charged at least 40%. You can check this by selecting Start>Settings>Power.
6. Connect your device to your PC via the USB cable and ActiveSync.
7. After you are connected using Activesync, double click on the software file: APAC_SPCS_20600_704_11200. Follow the prompts of the installation wizard. There are 3 stages to the upgrade, which will take about 20 minutes to complete.
**WARNING: Do not disrupt your device during the upgrade. Doing so may damage your device.
8. Once the update is complete, you will need to perform a normal reset. Pressing the reset button with your stylus, which is located on the bottom of the device next to the mini USB port.
Congratulations! You have successfully upgraded your PPC-6700!
** Please note: If you see ‘Error 101’ message on PC prior to upgrade starting, please do not disconnect your device from the PC. Confirm ‘USB’ is on the device screen and start over with step 6. If you did disconnect your device, reconnect it to your PC, and then confirm ‘USB’ is on the device screen. Proceed with step 6, running the Upgrade Utility.
For customer service please call: 1-800-229-1235

WM6 / Activesync 4.5 will not pair

Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K

Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)

Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K

Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly

If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...

Did any of these methods work? did you do something else to make it work??

This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?

yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'

Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K

I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time

I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K

lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K

start->settins->USD to PC-> Enable advanced network functionality

Oh, OK. I'd already done that! Keep coming in with suggestions though!

[REF] HowTo stop ActiveSync running all the time.

Hi everyone, I am constantly seeing allot of questions and duplicate posts all over the forums regarding for this ActiveSync issue, i.e. it is running in the background even after a disconnection from your PC or mail client etc. so I have created this thread to try to help clogging up some of the already big threads. Hopefully this will leave allot of valuable space left on the individual ROM's threads created by the cooks, so as to report non Microsoft related problems..
Full instructions and files here, hope this helps everyone at XDA.
http://forum.xda-developers.com/showpost.php?p=2481033&postcount=81

why wouldnt you just use this...?

Blazeitup123 said:
why wouldnt you just use this...?
Click to expand...
Click to collapse
It's indeed much comfortable and works excellent.

eLiAs_ASyncKiller.cab
Blazeitup123 said:
why wouldnt you just use this...?
Click to expand...
Click to collapse
Hi Blazeitup123.
The eLiAs_ASyncKiller.cab works fine but does not close activesync all the time, i.e every time I check my internet e-mail via gprs activesync stays open even with the eLiAs_ASyncKiller cab installed, and i have to close it manually.
The TaskManager route closes activesync all the time.

gadjet said:
Hi everyone, I am constantly seeing allot of questions and duplicate posts all over the forums regarding for this ActiveSync issue, i.e. it is running in the background even after a disconnection from your PC or mail client etc. so I have created this thread to try to help clogging up some of the already big threads. Hopefully this will leave allot of valuable space left on the individual ROM's threads created by the cooks, so as to report non Microsoft related problems..
Full instructions and files here, hope this helps everyone at XDA.
http://forum.xda-developers.com/showpost.php?p=2481033&postcount=81
Click to expand...
Click to collapse
thanks!i have just followed your instruction and for now it seems to work

Cheers..
sciuritiddu said:
thanks!i have just followed your instruction and for now it seems to work
Click to expand...
Click to collapse
Hi sciuritiddu.
Glad to help, it all come via XDA anyway.

You can undo action.
Hi everyone.
Just a quick note to say you can undo this action if you select wrong replilog...
Any problems doing this and I wll post screen shots on how to undo.

any other way?
is there any other way for making the activesync stop running everytime without using any additional software?

Stopping ActiveSync from running all the time!
amirfsl said:
is there any other way for making the activesync stop running everytime without using any additional software?
Click to expand...
Click to collapse
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) Click on "Menu" and select "Schedule..."
5) In BOTH drop-down menus select "Manually"
6) Click on "ok" and then close Active Sync.
7) Make sure Active Sync is closed and see if it comes back to life.
Active Sync shouldn't re-open any more, since you've just configured it NOT to connect to the internet automatically / periodically any longer.
After you verify that Active Sync didn't re-open itself - you may then go back and delete the "false" server you entered before. You may do so by:
1) Click on Menu and select "Oprions..."
2) Hilight "Microsoft Exchange" and click on "Delete"
3) Click "Yes" to confirm deleting this server
That's it...
Eliav

epriel said:
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) Click on "Menu" and select "Schedule..."
5) In BOTH drop-down menus select "Manually"
6) Click on "ok" and then close Active Sync.
7) Make sure Active Sync is closed and see if it comes back to life.
Active Sync shouldn't re-open any more, since you've just configured it NOT to connect to the internet automatically / periodically any longer.
After you verify that Active Sync didn't re-open itself - you may then go back and delete the "false" server you entered before. You may do so by:
1) Click on Menu and select "Oprions..."
2) Hilight "Microsoft Exchange" and click on "Delete"
3) Click "Yes" to confirm deleting this server
That's it...
Eliav
Click to expand...
Click to collapse
awsome!!
worked like a charm

incident said:
awsome!!
worked like a charm
Click to expand...
Click to collapse
Glad I could help!

this seems to be some kind of registry setting.
if we could find the setting, it would be much easier to disable activesync when it is unwanted

Just do a full dump before and after all steps necessary. Then you can easily find out what changed by comparison.

doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!

gtpete said:
doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!
Click to expand...
Click to collapse
Did yoy do as told in the first post? the Task Manager trick works for me every time with every rom!

the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)

gtpete said:
doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!
Click to expand...
Click to collapse
It was one and the same thing with me with Swtos WM6.1 WWE CE OS 20748, Build 20748 V1.2 Full, UC Ready ROM. I couldn't manage to kill the ActiveSync. I tried all your advices but nothing.
I think it's come with Bild 20748 ROMs.
The previous Bilds are without any problem.
Many thanks

KukurikU said:
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
Click to expand...
Click to collapse
I-d like to try this final advice: What kind of Task Manager you use?
Thanks in advance.

Qukace said:
I-d like to try this final advice: What kind of Task Manager you use?
Thanks in advance.
Click to expand...
Click to collapse
the htc task manager i am sure you have it also....

ppl can try this...
swtos said:
Use Sktools - Notifications Queue -- Find replLog.exe that starts at time changes and disable.
Or use Programs --> accessories --> TaskManager and remove the appropriate notifications.
Click to expand...
Click to collapse

How To Sync Contact WM6.5 To Google?anyone know?

i wanna ask something,now i've used HTC Mogul with WM6.5 from Ryan Mogul....
i tried to sync my contact to google with this instructions :
1. Open the Active Sync application on your device's home screen.
2. Click Set up your device to sync with it.
3. Enter m.google.com as the server address.
4. Ensure that the SSL option is selected.
Sign In to Your Google Account
5. Click Next.
6. Enter your full Google Account email address as the User name.
7. Enter your Google Account password as the Password.
8. Leave the Domain field empty. If your device requires you to enter a domain name, enter google.
9. Click Next.
10. Check Contacts, Calendar, or Email, depending on which you'd like to sync. (Tasks is not supported and will lead to an error if checked.)
11. Click Finish.
12. Press the Sync softkey on the left to synchronize.
From :
http://www.google.com/support/mobile/bin/answer.py?answer=138636&topic=14299
But i cannot sync it....
anyone know how to fix it?

what doesnt work?
that works fine for me .

fards said:
what doesnt work?
that works fine for me .
Click to expand...
Click to collapse
wow.....
on WM6.5?

yes perfectly, on both 6.5 and 6.5.x
it's how I often sync my contacts if I can't get to my PC after I've pushed my hd2 too much and forced a hard reset.

Works perfect for me too, on 6.5 and 6.5.3 , nothing changed since 6.1 anyway oO
Cannot understand where your problem is, i took informations from the google sync page (the one you mentioned in your own post) and all worked fine.
Dumb question but... your pc is connected to the internet when you sync it?
Or are you trying without a pc?
I'd like to help but rly man, i do not understand...

http://www.wmexperts.com/google-sync-down-again
maybe this is the issue you have?
or it could be how you're doing it, or even something in how the person who cooked the rom you're using did.

fards said:
http://www.wmexperts.com/google-sync-down-again
maybe this is the issue you have?
or it could be how you're doing it, or even something in how the person who cooked the rom you're using did.
Click to expand...
Click to collapse
ok....
i'll read it first....

hurayyyy hurayyyyy
problem solved....
thx all

[Q] Active Sync Problems TP2

I am using Active Sync to push my gmail account to my TP2. Everything works fine on my older ROM and then I upgrade ROM to SEA 2.07.707.1
Later, I cannot connect to gmail server again, it keep asking for user and password eventhough I have check "save password". so i cannot sync to gmail.
Can anyone help me please....?
Is it a bug ROM or anything else?

Has it ever connected to Google Sync on the new ROM?
If no, I've noticed that the User Name format given in the Google Sync instructions doesnt' seem to work: [email protected]
http://www.google.com/support/mobile/bin/answer.py?answer=138636&topic=14299
But this format works: [email protected]
If you haven't already tried, try this format.
Also, sometimes ActiveSync will just stop being able to sync. But this error doesn't ask me to re-input my Google login, it just fails to sync. When this happens, I just uncheck all the boxes in ActiveSync (mail, contacts, calendar) and click Finish. Let ActiveSync do its thing (it will delete all your contacts, mail appointment, which is a bit scary). Then go back into the ActiveSync settings, recheck the boxes and soft reset.
This sounds like a different problem. But if you're stuck without a solution, maybe its worth a try. But you may lose all your contacts and other info from your phone, so its your choice . . .

@redpoint73 Thanks for reply...
I have try your suggestion... still not working... it keeps asking for user and password.
First try....
User : [email protected]
Domain :
also...
User : user
Domain : gmail.com
I try to check and uncheck sync option... nothing's change...