mitoc mio p 350 - Upgrading, Modifying and Unlocking

can i install wm6 on this? i need a rom or something to do that? please help me a little with that

No, there is no way to install WM 6 on this device.

why? not even a rom update or something?

Look, no offense but your message is exactly the kind of thing that started the 'n00b bashing' thread on the 'About' forum.
If you read the site introduction and the WiKi you would know the following:
1) ROM is the operating system + drivers specific for the device bundled together - they are not available separately.
2) The only place to find an official ROM update is on the manufacturers site (Mitac in your case) because only the manufacturer can create the ROM image needed for your device (and they did not do it).
3) This site is dedicated to devices manufactured by HTC, we do not have / cook ROMs for Mio (not sure if it is even possible, because the tools are not available).
4) There is no 'something'.

Related

Modifying the ROM

I've been reading the forum, and based on the information and the tools there I have been able to modify my extended ROM, which is great. Now of course I'd like to modify the main ROM as well, but despite the many hours I've spent searching the forum, I can't find the necessary information to do it. There's always something essential missing, something which probably is obvious to a programmer, but not to a normal user. As I've been able to modify the extended ROM, I guess I should be able to modify the main ROM too. Who can point me in the right direction?
from what i understand it's not even 100% possible with xda1 since people cant seem to make the extracted files back to a nbf file
and there are no tools that i know of that even extract the main rom from a xda2
As I understand it, when you upgrade the operating system, you're actually modifying the ROM. Some people here like to call it to "flash", I think, and there are a lot of messages about it in here. I just haven't found the information necessary to do it. I want to modify the ROM on my XDAII.
no the operating system is the rom which is in a eeprom in the device
when you flash the rom you replace the operating system with the new one
when you say modifying it mean more in the way of exchanging different files inside the rom
but if you just mean flashing the rom with a newer then here is a guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
What does EEP stand for? How many ROMs are there?
I've seen a ROM created here for the XDAI, containing more programs than what the devices normally come with. I would like to have a ROM on my XDAII containing the programs I use, so that I don't need to reinstall them every time the device is hard reset. Isn't this possible?
What does EEP stand for?
Click to expand...
Click to collapse
huh what does EEP have to do with this ?
suppose it could stand for
Executive Excellence Publishing
or
European Environmental Press
how many roms there are i think there are 1.5 1.6 1.66 and 1.72
about extra programs then they are not! in the rom they are in the extended rom any CAB file you copy to the extented will install after automatic after a hardreset
you should take a look at the romkitchens ( specifically for xda1, but can be made for xda2 as well ).
and mkrom, and the other romtools
EEPROM stands for "electrically erasable programmable read only memory".
this is sort of the predecessor of flash memory.
"electrically erasable programmable read only memory" sounds like a contradiction, but thanks for that, it makes more sense than EEPROM.
What about all of us users who don't have a Unix machine? I suppose we're stuck with the original ROM then, and have to install our programs over and over again for every hard reset. Of course you can put a few of them in the extended ROM, but it becomes full too quickly and you're left with installing the rest of them manually.
well you can upgrade to a newer rom as they come out
like i have 1.66 but if i wanted 1.72 i could upgrade
about contradiction heh yeah suppose so but then if it was 100% always READ ONLY then it would be random was what in it as how the transistors randomly set when it was produced
A newer ROM wouldn't contain the programs I want.
no :/ but it could contain bug fixes for ms and radiostack and such
i suspect that extented rom was made so it would be easier for the phonecompanys' and other 3th party resellers to get programs preinstalled fast without having to mess around too much in the rom
this is at the cost of memory though
but then some programs dident like to be in the rom i believe here i mean if setting files were places in the rom aswell and the program could not write to the setting file
mkrom also works on cygwin under windows.
( now I also wrote this in the wiki page )
Isn't that just for XDA I?
it works for windows ce in general.
that doesn't mean that there is no work involved in getting it to work, but it is possible to make it work for the xda2. I use it to build custom roms for the devices we sell, that is why I wrote it in the first place.
What's cygwin?
How much space is there in the ROM to add extra programs? In the ROM that this forum developed for XDA I they added quite many programs from what I could see.
http://www.google.dk/search?hl=da&ie=UTF-8&q=cygwin&btnG=Google-søgning
Thanks for that, Rudegar.
To Itsme: I don't mind the work, but it looks like its written for programmers and that if you're not a fairly skilled programmer, you wouldn't be able to do it.

What is a ROM?

Please forgive my ignorance, I'm a new pda user and new to this site..
I've seen posts regarding new ROM versions and installation issues etc... but I don't actually know what a ROM is.
I'm assuming it's a software update but if anyone can give me a more detailed (but easy) explanation, I'd be eternally grateful..
Thanks,
Chrono..
Strickly speaking a ROM means Read Only Memory. But in this case topics/thread regarding ROM refer to the Operating System (OS) versions which eventually reside in the ROM portion of the unit's memory.
Can I give you a 'for instance'....
I have a new XDA Mini S, my partner has an XDA II, (o2) but an older version.
My contacts list can store the photo of the contact, his can't... he wants to upgrade his software to include this feature, ... should I be looking for a ROM update or take up the issue with Microsoft / o2 ?
(Sorry for being a pants newbie, ... I'll get better in time)!

Authenticity of “Official” WM6 ROM & Step by Step Guide

Can anyone provide these answers before I ever risk installing this:
What are the origins of this "Official" ROM to make it be classed as an "Official" HTC ROM as there is nothing mentioned on HTC support website?
--------------------------------------------------------------------------
1) Also, as a suggestion could the ROM list page (http://wiki.xda-developers.com/index...inity_Upgrades) be updated to reflect the flurry of recent releases of ROMs in the forum over the last few weeks inc. this one?
2) Which of these is the correct one to use on for upgrading from Orange SPV M700 Wm5 as after reading the threads I have: TRIN_WM6.rar, TRIN_WM6_FLASHER.rar, Official_WM6.rar.
3) If there are patches / upgrades required for this e.g. HTC_VideoCallPatch_vX.cab, Microsoft_Office_Mobile_6.1.cab could I suggest they be all be culminated on a special page for this ROM if this is to be the baseline ROM for future developments / tweaks as these files are scattered all over the forum at present.
4) Any chance an experienced flasher could create a "Step by Step Guide" from an Orange SPV M700 Wm5 locked to an WM6 Official install (inc. Orange Settings / Customisations etc.) unlocked that includes creating a ROM backup of your own phone prior to installing, so you can switch back? - I have read the posts / threads and have yet to find a definitive page on all this.
Just a thought..... as it would help novices and cut down posts to relevant questions and not the same old inquiries.
Cheers
Hawk
Yeah we noob need some steb by steb guide(for vista though)
it was stated in the first mention of this rom that the poster wouldn't be answering questions about it.. so there's not much people can tell you about where it came from, etc.
the cabs may or may not be accumulated because there's nothing to suggest that this ROM will be the basis of future developments. The build is older than current WM6 ROMs on this forum.. better read a bit more to get the big picture.
can't tell you which one is the right .rar file to flash, but you won't find a step by step guide. Essentially, go get hard-spl and run the RUU to install it on your phone. Then manually enter the bootloader and while connected via USB run the RUU for the ROM you want to flash.
I don't use vista, so can't say much about the connection problems but there are MANY MANY posts about it, so i suggest you get searching.
happy flashing

How to get a ROM from a device?

Hi,
I got asked by several people now who have wrongly applied a ROM udate to their device whether I could provide them with my original ROM from my device.
They have broken some of their devices' functionality, such as non-working trackball, keyboard, etc.
I have no idea on how to rip my ROM from the device and safe it to a file on the HDD.
Which tools do I need?
Appreciate any link to existing entries or further reading...
I have a Toshiba G710 (VDA GPS, Amoi 6711).
Is the procedure always the same with any Windows Mobile device?
Many, many thanks in advance.
no it's rarely the same procedure on various wm devices
Rudegar said:
no it's rarely the same procedure on various wm devices
Click to expand...
Click to collapse
But which tools do I need and how to get the ROM off the device?
Check this tutorial out: http://www.xperiax1.net/forum/how-t...rom-first-backup-your-stock-rom-how-here.html
Just make sure to DL the most recent version of HTC ROM Tools and replace the one in the kitchen. Also, if your device is not listed in that app, you will be able to dump the rom, but not reconstitute it successfully. That's where I am at right now.
Cheers

Looking for a ROM

Hey guys was wondering about flashing my HTC Touch Diamond, But I want a decent ROM.
Something that's not too packed up full of junk, Easy to use and a better performance.
Also maybe a guide to unlocking/debranding this phone along with a flash guide if that's not too much?
cheers.
xelasha said:
Hey guys was wondering about flashing my HTC Touch Diamond, But I want a decent ROM.
Something that's not too packed up full of junk, Easy to use and a better performance.
Also maybe a guide to unlocking/debranding this phone along with a flash guide if that's not too much?
cheers.
Click to expand...
Click to collapse
From one newbie to another, you should read the sticky posts... they are full guides and information about flashing your phone's ROM / Radio etc.
The forum 'Search' facility is your friend, it like's to be used. That's what I did and found all I needed to know about the available ROM's and Flashing process without having to ask a single question.
The New World ROM introduced a much-improved version of the Open Firmware interpreter, version 3.0, which added many missing features, fixed most of the bugs from earlier versions, and had the capability to run CHRP boot scripts. The Toolbox ROM was embedded inside a CHRP script in the System Folder called "Mac OS ROM", along with a short loader stub and a copy of the Happy Mac icon (in Mac OS X 10.2 and higher, this was replaced with a silhouette of the Apple logo on a blank gray screen) suitable for display from Open Firmware. Once the ROM was loaded from disk, the Mac boot sequence continued as usual. As before, Open Firmware could also run a binary boot loader, and version 3.0 added support for ELF objects as well as the XCOFF files versions 1.0.5 and 2.0 supported. Also, version 3.0 (as well as some of the last releases of version 2.x, starting with the PowerBook 3400) officially supported direct access to the Open Firmware command prompt from the console (by setting the auto-boot? variable to false from Mac OS, or by holding down Command-Option-O-F at boot).
rajas
new rom

Categories

Resources