Related
Hi All,
I tried to reflash my XDA2s using the http://www.my-xda.com/downloads/XdaIIs_launchROM_v1.12.62_178.exe link found in another post on this forum http://forum.xda-developers.com/viewtopic.php?p=87272. I didn't particularly need to do it, but I like faffing so I did.
I ran the .exe accepting all the defaults, the xda2s restarted and stopped at a blank screen with "USB" at the top, and "v2.06) at the bottom. It's just stopped there doing nothing now.
Is there a way that I can reset it? Removing the battery won't help will it because of the backup battery? Is there a hard-reset option like there was on my XDA?
Many thanks for any help.
Dan
Sorted it, my **** laptop must have hung the application. I rebooted and ran it again, it's all good now.
Many thanks for reading, and sorry I wasted your time!
Dan
The same thing happened to me!! I got a little worried!
Ian
Hehehe. My damn bluetooth won't work now, getting an error about memory for device drivers.... :roll:
efcmandan said:
Hehehe. My damn bluetooth won't work now, getting an error about memory for device drivers.... :roll:
Click to expand...
Click to collapse
I had the same thing today!
Ian
i am sorry if this has been asked before.
i have watching you guys on here for a while now.long story short, i got shafted on ebay. i bought a herm100, fantastic, then it got barred via imei.
i have tried everything but was scared to ask on here because, every time i see that someone does ask 4 help with this sort of thing he gets shot down by one of the senior members as a noob, or worse a thief.
anyway i have now managed to really screw my new toy up by editing something or other( cant remember what). and now i have no active sync.
i have tried to hard\soft reset but stop Nada.
please can somebody help this noob at least get it to work as a pda again,i don't care about using as a phone as i still have my spv c550.
again if this has already been asked i apologize to all those senior members who get upset about that sort of thing. but it is not that easy to find what u are looking for, when u don't know what to look for, among the 1000's of threads on here.
The easiest way to make it works as a PDA after you chaning something is HARD RESET.
Nghiem said:
The easiest way to make it works as a PDA after you chaning something is HARD RESET.
Click to expand...
Click to collapse
i have tried both a hard reset and remove the battery but no help, but thank u for you reply
tony
May be stating the obvious, but did you follow these instructions for a 'hard reset'? It's different than a soft-reset...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
This reverts your device to it's original factory settings (unless of course you've flashed an updated or cooked ROM). To learn how to do that, go to the link above, then to the Hemes WIKI:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Scroll down and look through the sections "Hacks & Tweaks", "Upgrading and Cooking", and "Upgrading Problems:".
Good Luck
aquanaut88 said:
May be stating the obvious, but did you follow these instructions for a 'hard reset'? It's different than a soft-reset...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
This reverts your device to it's original factory settings (unless of course you've flashed an updated or cooked ROM). To learn how to do that, go to the link above, then to the Hemes WIKI:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Scroll down and look through the sections "Hacks & Tweaks", "Upgrading and Cooking", and "Upgrading Problems:".
Good Luck
Click to expand...
Click to collapse
ty for your reply i have found the fault now it wasnt my pda it was my usb hub that has gone down. only noticed when i tried to make a call on voip and had no mike.
like i said on my original thread i have been watching this site for a couple of months now after paying htc 20gbp to unlock my c500.
i have managed to unlock all my phones myself since then with what i have found on here. and this has been my first post.
bty i have already upgraded my rom to pro black 3.0 radio1.41.
once again ty very much.
now i will wait and keep serching 4 a way to reset my imei
don't think you can reset yr imei as it is the manufacturer's way to identify your machine during assembling.
my advice, sell it off, to another country and get a new one.
chances are yr imei is only blocked with operators in your country.
cheers, Leo
i will find out next month going to thailand for holiday i will see then
in the mean time i am looking for a new mainboard. cause that will fix it 4 sure
I recently installed a different ROM onto my device, and now when it syncs with my PC to install the device driver, it installs "Micro$oft Windows Mobile Remote Adapter #3." What the hell is this? Removing it from the Device Manager only reinstalls the same one and I can't sync with WMDC. How do I get Vista to install the correct driver, and why did it never have a problem before?
This happened to me as well after I installed Schap's 3.54c ROM would like to know if there is a fix.
Oh come on, guys. I really wish just once someone would successfully answer one of my questions. This is kind of a big deal here. I can't flash another ROM if I can't sync, and I'm a little skeptical that NO ONE HERE has ever encountered a solution for this. Help me out!
You've been very lucky my friend.
Blowfish64 said:
Oh come on, guys. I really wish just once someone would successfully answer one of my questions. This is kind of a big deal here. I can't flash another ROM if I can't sync, and I'm a little skeptical that NO ONE HERE has ever encountered a solution for this. Help me out!
Click to expand...
Click to collapse
You’re damn lucky no one has flamed you for all of your noob posts. You need to post less and search and read more.
However, because I'm somewhat of "noob" as it relates to posting but, I'm a bit of veteran when it comes to flashing, etc. I’ll bail you out on this one.
1) First, in order to flash from Vista you should visit the Incredible MrVanx’s site. That should allow you to flash from Vista (I haven’t tried it as I have an XP machine right behind me from which to upgrade my 8525 without the risk of heartburn).
2) If it’s syncing you want then you may need to disregard the above and follow the advice posted here.
And, as advice I gave to another smarta** poster (free advice being worth exactly what you paid for it). Drop the attitude and improve your searching/reading skills. If you don’t want to do that, then stop f’ing around with ROM upgrades.
Timtown said:
You’re damn lucky no one has flamed you for all of your noob posts. You need to post less and search and read more.
However, because I'm somewhat of "noob" as it relates to posting but, I'm a bit of veteran when it comes to flashing, etc. I’ll bail you out on this one.
1) First, in order to flash from Vista you should visit the Incredible MrVanx’s site. That should allow you to flash from Vista (I haven’t tried it as I have an XP machine right behind me from which to upgrade my 8525 without the risk of heartburn).
2) If it’s syncing you want then you may need to disregard the above and follow the advice posted here.
And, as advice I gave to another smarta** poster (free advice being worth exactly what you paid for it). Drop the attitude and improve your searching/reading skills. If you don’t want to do that, then stop f’ing around with ROM upgrades.
Click to expand...
Click to collapse
Meanwhile, you need to post less and learn to read more carefully to the posts of those you're responding to. I have flashed ROMs a number of times. Where did I say that I did not know how to flash a ROM? I said that I can't now because since my last flash Vista will not recognize my PPC. It installs the wrong driver and I cannot figure out how to change that. The only thread I found that seemed to answer this question (http://forum.xda-developers.com/showthread.php?t=303634) did so in italian.
I also found another thread dealing with this same problem (http://forum.xda-developers.com/showthread.php?t=301876&page=3) but aside from re-installing Vista which I am loath to do, none of those solutions worked either.
And as for your second thread you directed me to, I'd already read that and tried downgrading WMDC before. I suppose I should have clarified myself by saying that it's not simply that I can't sync, I cannot connect my PPC to my computer through WMDC at all. I should have been more specific, but I figured since I mentioned that it kept installing the wrong driver, you would have been able to figure that out on your own.
And let me get this straight, you call yourself a veteran flasher, but don't even HAVE the computer operating system I'm having trouble with? Perhaps we both have things to improve about our postings, Timmy.
As for all my "noob" posts, I searched all of them before posting. Not to mention I've only had to post three previous questions which I could not find an answer to on here or elsewhere, those being
A) Is it possible to copy the gwes.exe.0409.mui without having to do a ROM dump? (Never got resolved, though Sleuth at least tried the basics).
B) Is there anyway to redate SMS's since Jeyo screwed them all up when using the program to back them up. (Never got resolved).
C) Can anyone help with the device lock asking for a password I never set up? (Yep, never got resolved).
If you would like to direct me to RELEVANT threads that answer these questions, I'll be more than happy to thank you for it, but until then at least you did get one thing right about your post, that being what it was worth.
Don't know if you've tried this, but.
I had the same issue. After installing one of JJ's ROMs, I couldn't get WMDC to recognize the new build. Broke all partnerships, nothing helped.
I then completely uninstalled WMDC and rebooted. I then went back to MS and grabbed WMDC again. It installed, I plugged in the TyTN and crossed my fingers.
The drivers re-installed and everything is good in the world now.
Also, Mr. Vanx's guide for downgrading drivers is not necessary for the HTC official or at least the last three builds of Black. I can't speak for any other RUU's, but the latest completely work with Vista (Ultimate & Enterprise, at least).
Hope this helps you out.
Thanks for the effort, silverfox, and the tone. Unfortunately I've tried that a couple of times, and it still goes along merrily installing the wrong driver. Does anyone how I could manually select the "HTC USB SYNC" driver? Not even sure where it's located. Checked under system32/drivers but it's not in there.
Nevermind...
Blowfish64 said:
...can't sync, I cannot connect my PPC to my computer through WMDC at all. I should have been more specific, but I figured since I mentioned that it kept installing the wrong driver, you would have been able to figure that out on your own.
Click to expand...
Click to collapse
You are quite right, I should have been able to read you mind. My bad.
Blowfish64 said:
And let me get this straight, you call yourself a veteran flasher, but don't even HAVE the computer operating system I'm having trouble with? Perhaps we both have things to improve about our postings, Timmy.
Click to expand...
Click to collapse
Wrong again blowhard, read the post again, especially the part about where I say I have "...an XP machine right behind me..., I'm posting from a Vista machine.
Blowfish64 said:
As for all my "noob" posts, I searched all of them before posting. Not to mention I've only had to post three previous questions which I could not find an answer to on here or elsewhere, those being
A) Is it possible to copy the gwes.exe.0409.mui without having to do a ROM dump? (Never got resolved, though Sleuth at least tried the basics).
B) Is there anyway to redate SMS's since Jeyo screwed them all up when using the program to back them up. (Never got resolved).
C) Can anyone help with the device lock asking for a password I never set up? (Yep, never got resolved).
If you would like to direct me to RELEVANT threads that answer these questions, I'll be more than happy to thank you for it, but until then at least you did get one thing right about your post, that being what it was worth.
Click to expand...
Click to collapse
Really? Someone else might help you but, you are apparently so smart, I doubt it. Good luck Richard-head.
This worked for me
Settings > Connections > USB to PC
Uncheck "Enable advanced network functionality"
tinpusher said:
This worked for me
Settings > Connections > USB to PC
Uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
Unfortunately, I've had that disabled for a long time now.
Hi
I haven't found anyone else in TP2 forums report this problem I have on reboot, but can anyone help? After inputting my PIN, a screen comes up stating "We're Sorry... A problem has occurred with services.exe" and it asks if I want to send a report to Microsoft, but if I click either "send" or "don't send", it then appears to function normally.
I, too, have this problem, but hesitated to bring it up here because my assumption was that it must have something to do with a tweak I have done or some software I have installed (and then subsequently uninstalled?). As such, the parameters are too broad (I would have thought) to be able to determine why this is happening. Are you also working with an AT&T Tilt2, stock ROM?
I too have this problem, if it occurs overnight, my alarm will not go off, and it get stuck on the time that it happens until i click ok. kinda sucks
I had it - tech support (AT&T) exchanged the phone
I had it - tech support (AT&T) exchanged the phone
It was within the first thirty days
my 30 days is up
Also got it with my TP2. Dutch stock rom windows mobile 6.5
Also getting the error after a restart sometimes, or randomly in wimo 6.5. Never had it until my wimo ran out of power when playing a game... It shutted off on it's own. Now i randomly get that error so once in awhile. I even did a hard reset, but still getting it sometimes. But not always after restarting...
Bit strange... Don't notice anything not working though. Everything seems to be working fine... Is there a way to disable error reports in wimo?
Sephi- said:
... I even did a hard reset, but still getting it sometimes ...
Click to expand...
Click to collapse
Wow, thanks for the info -- I was actually considering a hard reset because of this -- you've saved me the trouble!
pistou said:
...Are you also working with an AT&T Tilt2, stock ROM?
Click to expand...
Click to collapse
I have stock HTC 6.5 ROM (WWE). It's not a major problem and only occurs if I reboot - luckily it does not happen randomly for me or when unlocking or switching the phone transmitter off and then on again.
agrickard said:
It's not a major problem and only occurs if I reboot.
Click to expand...
Click to collapse
Now, on reboots I'm also getting an error message about gwes.exe -- comes right after the one about services.exe.
I get it too. Stock Rom with plenty of apps and stuff added.
Me Too
I started having this and other errors after installing Hou Ming's fexploreext205. I had just started to look for a replacement when I ran across this thread.
nycny said:
I started having this and other errors after installing Hou Ming's fexploreext205. I had just started to look for a replacement when I ran across this thread.
Click to expand...
Click to collapse
Darn, I don't have this app installed, but this line of investigation may yet yield results. I'm going to try to see if I can figure out the history of my installs (good luck!).
OK, I bit the proverbial bullet and did a hard reset. It's taken me a couple of days but I've got all the software re-installed (with a soft reset after each install! -- more or less) and so far so good: no service.exe (or any other) errors. Let's just hope there isn't some periodic thing that will trigger the error down the road.
I just downloaded and upgraded my Touch Pro2 now to the WM6.5 for GCC and Egypt. However, anytime i do a soft reset i get the following error message:
A problem has occurred with services.exe
And then the blah-blah about telling Microsoft about this problem.
This doesn't happen however if i shutdown and the restart the Touch Pro 2.
I have done a hard reboot and still i get this error. I have posted this on HTC support site. Let's see what they say.
Now appears cured!
azuka said:
I have posted this on HTC support site. Let's see what they say.
Click to expand...
Click to collapse
For some reason I now don't get it. I have no idea why as I haven't been trying to solve it specifically and have not hard reset!
@azuka: Please let us know what HTC say.
i also have this problem..
using stock 6.5 WWE SEA rom
happened after installing some programs..
however doesn't seem to affect or give any problems after
clicking don't send or send ..
would love to know why this occurs tho..
thx
Same thing happened to me. I have the new leaked t-mobile 6.5.
I did the hard reset and it happened to me again after i installed a few programs so i decided to reflash the with the t-mobile rom again and thank God it hasn't happened since the morning. i have been installing the programs one by one with a soft reset right after every new install trying to recreate the problem but it hasn't happen..
i hope it stays that way.
I have the original HTC rom (ITALIAN) and I have this problem if i deactivate Manila and i activate Titanium interface. I think there is some program that try to "talk" with manila during boot.
Now I enabled Manila again and it works like a charm.. (But I miss Titanium interface.. )
HTC simply asked me to download the WM6.5 upgrade again and reinstall. This i did and surprisingly i have not received that error again. 3days+ now and still counting.
I have an AT&T Tilt 2. i have flashed many roms on it. i do task 29 then flash new rom. problem is, there are only two roms on this site that work completly, all other roms i have a problem with the end/home key not working when i read or look at a text or mms. the key works in all other tabs/ functions thou. i just want to see if i can find why this happens and see if i can fix it. the two roms it works fine with are "e2_ROM_25_20100320 and TPC v7_23544. all other roms ive tried i cant get the end key working. i have tried remapping the answer key for the end key function also to no effect. works just like the end key does. in text view no worky fine, all other tabs/ functions worky fine. anyone think they can help, i thank you!
what do you mean "end/home key not working "?
when you press it nothing happens? also why you press end/home key when you reading SMS message???for what? trying to go back to home screen?
Forgive the question, but just what is "task 29"? I've done a search and came up with tons of posts where it is mentioned, but none actually explain what the heck it is?
This is the first time I've heard the phrase used in the 2 years that I've been here. LOL!
Thanks,
Debbie
DebbieNY13 said:
Forgive the question, but just what is "task 29"? I've done a search and came up with tons of posts where it is mentioned, but none actually explain what the heck it is?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=649191
Basically it clears your storage without flashing your ROM.
For the OP, it sounds like a driver thing. Have you tried asking in the specific ROM thread?
burtonsnow8 said:
http://forum.xda-developers.com/showthread.php?t=649191
Basically it clears your storage without flashing your ROM.
Click to expand...
Click to collapse
Many thanks! How the heck did I miss this??? LOL! I had tons of threads, most which were referring to "Task Manager", because it tagged the word "task" instead of the entire phrase (search is not a perfect animal), so I was way confused.
Seems I can't use this anyway due to my USB connection being all FUBAR. I have to use a BT USB to sync, so I guess I won't be doing much flashing until I get it fixed. Too much $$$ for me to do that right now unfortunately.
I will certainly subscribe to the thread for use down the road.
Debbie
...Who has learned something again on XDA!
nokiadashi said:
what do you mean "end/home key not working "?
when you press it nothing happens? also why you press end/home key when you reading SMS message???for what? trying to go back to home screen?
Click to expand...
Click to collapse
Yes, while I'm in sms or mms the end/home key does nothing. I only push that button to return to the home/today screen. i have ask in a rom forum that it was happing with and was told to try task 29. i do that already.
Any-one think they can help me? I have a new tilt2 and I still have my problem. I've tried all i can think of but I'm still new to this phone.
I think I've narrowed it down to HTC message itself. I've tried a few roms that had no HTC Message and the key works fine. Install HTC Message and the key no worky fine. I install HTC Message cause I like the way it looks and works, it being slow dont bother me. If someone knows of another messaging cab I could use instead of HTC's but looks and feels like HTC's, please tell me or give me cab to try. Thanks!
I gues I'm the only person with this problem, I've looked all over the net and this web site and see no-one with this problem. I dont know if its me doing it or my computers doing it to my phone, but even with a new tilt 2 I have the same results. i dont know how to cook or dump roms yet ( working on it ) but maybe, if some-one has the end key drivers or a regtweek or any other idea I could try, they could post it here for me to try.
Well,, I"ve tried and tried to fix this problem I'm having to no sucsess. I've Flashed a rom that HTC Messaging works on, gone through all the regisrty and settings and can't see any differance between one it works on and one it don't work with. I wish i knew more about coding and programing, but im not that smart. I have tried every way of flashing that I could come across on all of xda site. And like I've siad before, I have another tilt 2 so i dont think its my phone. I have redownloaded roms, task 29, factory flash then custom rom, redid HardSPL, all kinds of flashing combos but nothing works. I would really love to fix this but I'm at a loss. If any of you guys or gals can help me, please do!