My device rom seems to be aku1.
is it possible that i use other roms,which is aku3,replace dlls and other things from them and create my aku3 rom?
For example i saw contacts in newer roms is lot improved,is it possible that i use contact.exe(if it is the file name)from newer roms,replace it into my current rom file?or other .exe or .dll files?
Thats what ROM cooking is.
You take components that are generic and not device dependent from a more advanced ROM and place it in a ROM for your device that contains all the device specific stuff like drivers.
BUT: it is not as simple as it sounds.
First, you need a ROM image for your device (and if you are going to ask more serious questions on this matter you must specify exact model of your device) which you can get through a dump or from an official update.
Second you need tools, also specific for your device, that can take apart that image and put it back together.
And finally you need the new files which also have to be obtained from a ROM image for the more advanced device.
Thank you.
Well i guess i have the tools,becouse i could create the dump folder.and repack it again.
although the generated files were not same.(someone in chineese forum told me it is enough that value in bootloader be same,in my case values before 0x060000,i dont know if it is enough or not).
I havent yet tried to upgrade that rom,until i have enough knowledge.
But if we assume i have all tools,is there a guide or something that what files i can replace?
for example if i want to have new contact program,what files should i upgrade?
or is there a list of all dlls,exe files which are device independent?
so?anyone?
Some other questions:
using addfile/removefile,can i replace .dll files?
becouse i used the dump folder,shellres.96.dll,and deleting/adding,i get no icons in windows.
also using s000 file renaming it to shellres.96.dll i still get the same problem?
is there anyway to change this dll?
Related
Hi all,
let me start telling that reading through this frum gives me the feeling that this is a very nice place for information around htc-devices and I thank both creators and users of this site for such a good information-base.
Reading here convinces me that I am able to fulfill my wish to change the language of my VPA-IV (HTC Universal).
I am a Dutch person working in Russia. As I was living in Germany I optained the device there, hence the German language.
For me personally all computer stuff should be English, so I'd also like this device to be so. The fact that the keyboard is German does not disturb me too much.
As a Vodafone user, who has other provider cards as well, I immediately bought the unlock code, so the device is working with other GSM cards as well.
When I asked Vodafone (before I bought the device) if I could switch to English I was told that I should buy myself another Windows Software and they were not able to provide me with it. They were not able to provide any help, nor software for this purpose though.
When reading around the site here (as well as the ftp) I understood that Windows is not provided now. So my first question would be :
-Am I really set to go if I have downloaded the following files :
Jasjar_WWW_11353_137_10301.zip
MaUpgradeUt_noID.zip
Universal_Radinly_UPgrade_1.04.02.zip
Or do I need something more ?
Further I read about extracting the .exe file (f.e. Jasjar_WWW_11353_137_10301.exe) and put some files from there at certain places. I have WinRar but this program does not recognize the .exe file. Can I really extract files from this .exe ? How do I do this.
A lot of talking is here about a bootloader. If the device is in this stage, can I still access it ? (f.e. like seeing a harddrive in my PC's Windows Explorer or something the like)
As I will be stressed like hell (who does not, when he does this first time) when I see the bootloader screen, is there something I SHOULD or should NOT do to make sure all will be OK ?
Last but certainly not least I feel very eager to backup before I do this. Is there a posibility to backup my ROM in some way, save the files on some place for eventual return to the ROM and ExtRom I have now ?
I tried the Program TotalCommander. If I enter the Extended_Rom in the "directory" field of this program I see all files included in the Extended_Rom, same if I enter simply "Rom". Is a backup simply copying these files to my PC or is there more to be done ?
thanks for answering in advance,
Ruud
Hi,
I'm searching a german ROM...
if you have a little of your time to spend on it, i would be very thankful.
but first:
- about extracting the .exe files: Run WinRAR -> Menue: Open file... -> change 'All archives' to 'All files'
- about ROMs: Jasjar_WWW_11353_137_10301.zip is the only rom I would update, not the Radio.
- about bootloader: In this state you can't access your device (only updating the ROM)
- about backup: It is not easy. (How to d2s (dump) the ROM ) but I think Vodafone will shortly relase a update. So it will be possible to restor the device.
How to help me out:
- you will need a Storage Card.
- Download TestWM5.rar
1. Extract TestWM5.exe from TestWM5.rar and place it to you device.
2. At the device, use File Explorer to execute the TestWM5.exe
3. Click "button1" to start the dump process, the file will then be save to \Storage Card\Dump\
4. Copy the Dump folder out and then RAR or Zip it
This will include all files in your windows dictionary -> this is what i need
Where to place exactly ?
Hi bepe,
do not know if You are still available (or again). First your issue.
I logon to FTP from XDA-developers as to upload.
In the upload directory there is only a HTC-Wizard directory, not a wizard. Is this directory the one to place your file on ?
Is there a rule how to name the file ?
I will be dumping in a minute, can upload as soon as I have your answer.
Ruud
Hi bepe,
further to your issue.
1) I do understand that no private information is copied ? or should I do a hard reset before I dump for You ?
2) Whilst running your testwm5.exe from the root-directory of the storage-card I am being asked to agree your program access. This is normal, I allow. But why are there additional programs being opened I never heard about ? I denied them access and let the program run further !
After a lot of files running through the screen (very fast) it looks like the program stopped or finished. Now which file has been created for You ?
Explorer on the Universal does not show it, through my PC I looked as well, but do not see any big file, please explain.
Ruud
Hi Bepe,
one more reply to You :
Even if I allow the file mentioned to run (during the time your program is running), I am being asked again and again if I allow it again. The name is GAC_System.Data_v1_0_5000_0_cneutral_1.dll
Even if allow access all of the occasions I being asked, no file is being created on my storage-card, nothing to dump to You. Not even the dump directory is made.
What do I do wrong here ?
To my issue :
First I noticed that the radio update is available here only as 1.04.02
My system tells me I have 1.04.10 delivered from origin. If I do a ROM-upgrade, do I loose my "radio", or will it not be touched ?
Connected to this, can I dump my "radio"-files seperately ?
WinRAR. Issue solved !
Backup : I was at the buzzdev.net link before. But I actually do not even understand where I can get or see the task32 language he dumped on his screen. And I understand that I will not be able to restore it without help anyway. So this is not really the kind of backup I want.
The information about Vodafone, where does it come from ? when is something expected ?
Ruud
For security sake only.
I am getting nearer to make that final step ;-)
My Winrar was too old, I could unzip the .zip file to a .exex, but I could not unzip the .exe file further. Just downloaded the latest Winrar, now I can see all files included in the provided .exe file.
1) I understood that I should delete the original upgrade-file called ROMUpgradeUt.exe.
2) When I start the MaUpgradeUt_noID.exe in a seperate directory with the rest of the files from the .exe I get to see a different HTC device. When I continue, it will not recognize any of the versions from my Universal. I felt unconfortable to continue.
Can it be done without a problem ??
2a) I renamed the ms_.nbf AND radio_.nbf and restart the Utility, it still shows a photo of the wrong device, but it now does recognize the versions of Device CD image version : 1.13.56 Device Extended image version : 1.13.163 and Device Radio image version : 1.04.10
It confirms to change to CD image version 1.13.53 and leaves the extended image version : "empty" as well as the Radio image version : "empty"
Does this mean that by taking away the ms_.nbf and radio_.nbf files I can stop the device from upgrading the extended rom and the radio ?
Why I ask ? Because if I renamed ms_.nbf back and ONLY radio_.nbf is unavailable now, it shows to change the Extended Rom too, but the Radio image is still empty.
Finally if I rename ALL back, it shows to change all, but all version numbers are older once ;-(
Main question here is, can I leave radio_.nbf away, upgrade and hope for radio to be my version 1.04.10 ?
Ruud
Hi,
I'm back.
I'll PM you Upload information...
private information are not copied.
Only if you have saved private information in your /windows/ folder!
i have never being asked to agree for program access :?
...but I started it of the root-directory of my device.
what is the name of your 'Storage Card' folder?
I not realy have the info from Vodafone, but for all devices before there have been more than one update. But I can't tell when the first update is expected.
If you are trying to make a backup: you will need a terminal program
About dumping
So I have a complete "new" device now.
Did a hard-reset, after which I did not give any new information to the device.
I placed the .exe file You gave me in the \windows\startmenue before, after which it is asking tonloads of access requests.
Now I replaced it in the root-directorym Yes, no additional questions asked anymore, perfect, well NO. As there is no directory made on the storage card. I tried it once with the async active and once with the device seperate. No result.
Any ideas ?
what is the name of your 'Storage Card' folder in your root?
As the device is German, it is called "Speicherkarte"
and renaming is not possible (allowed)
OK this is the problem, I'm trying to get the Source code to change that.
found something: this tool will change the folder name from different languages to "Storage card" which is often needed for different tools
Understood.
About my question, as I am still nervously waiting (cannot start the upgrade before You got your data, can I ;-)
Did I understand correctly, that the file MaUpgradeUt_noID.exe is made for different devices from HTC and therefore I do not get a photo of the universal when I start the software ?
If I start the JASJAR_WWE_11353_137_10301.exe I DO get to see the Universal, but of course get the country error.
Did I also correctly understood I can take away the radio_.nbf from the directory and the update will handle both ROM and ExtROM but leave the Radio untouched ?
Will I be entering this "bootloader" status at all, as I do not need any further updates then ? Are there any resets after the upgrade which I SHOULD or SHOULD NOT make to get the device working again ?
Ruud
Hi bebe,
storage.cab works (be it only after a soft-reset)
The program testwm5.exe is much slower now, so the result is taking minutes now (if not tens of).
Looks like the perfect speed of the program while the storage card (at least for his eyes) was absent, was due to "saving into space"
Will upload asap.
Ruud
I'm loading JASJAR_WWE_11353_137_10301.exe its at 60%
MaUpgradeUt_noID.exe is a hacked version, of another device.
So the photo should not be important. (Please wait until i have downladed the file, I'm not realy sure jet...)
OK, I have to wait anyway, because TestWM5 is very slow now, I can see file after file and calmly read it. Before it was running before my eyes. I am afraid this is going to take ages.
We are on the same frequency that the dump I am making is from a device WITH Extended Rom installed. I was NOT soft-resetting during installation, so all Vodafone add-ons, are to be there now.
If You need the one without ExtRom as well, please tell me.
The upload works OK, I prepared a directory there, but uploading is to be done after longer waiting time.
Are You afraid the JASJAR file is not good ? I downloaded it because this one was proposed on this forum.
Ruud
Its not about the ROM its about the MaUpgradeUt_noID.exe I'm not sure if ths is the exe file to update a Universal.
I dont have a Universal only a Himalaya and my up UpgradeUt starts with HimUpgradeUt... .
Was this file mentioned in the readme of the JASJAR exe?
my download is very slow... 70%
I only downloaded MaUpgradeUt_noID.exe because it was proposed here (for the Universal).
I have no Readme.txt inside the exe
EnterBL.exe
GetDeviceData.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
Well and of course the original upgrade file ROMUpgadeUt.exe, but I was suppose to delete it.
Only file which I can read is RUU.conf :
[PLATFORM]=857873
[RADIO_TYPE]=2
[SECURITY_FLAG]=1
[DECODER_KEY]=1
[RADIO_FLAG]=2
[GETADDR_TYPE]=1
[JUMPCODE_TYPE]=1
[FORMAT_TYPE]=2
[SCREEN_TYPE]=2
OK, TestWM5 is finally ready, will do compressing and uploading soon.
Ruud
how do i install/use an nbh file? i looked on the forum and cant find it. please someone either tell me or send me a link explaining how to use nbh files. my computer doesnt recognize the format. thanks.
I suppose you want to upgrade your pda or your phone.
You must use a bootloader to install the file and upgrade your pda. Many bootloaders exist.
For example, I've installed a new ROM with WM 6.1 (from Algasystems) on my iPAQ 4700 and I have used a bootloader that I have found in the thead about my pda (I think I've used MTTY). Than I suppose you can find yours in the thread where you have downloaded your ROM .
To flash .nbh files you need a custom.RUU (Rom Update Utility) .nbh fiels are only flashable to certain devices, i.e. HTC Kaiser, Tilt, TYTNII, etc.
Older devices flash with a variation of this. What is your device type?
My goal is to remove all unused applications from the ROM. I use surface kitchen (couldnt find anything else). I put Rom files into the Base ROM folder in the kitchen and used option 1. All finished ok. However when i start !COOK.cmd I cant see any packages (i can see them in the OEM folder) to select. In the readme file I found this:
3. Open !COOK.cmd and Buildos will open.
-Check/Uncheck the packages you want to add in the rom(if there are no things to check, add the option.xml file to each of the oem packs)
However I couldnt find any option.xml file. I checjked Wicki but there is only Kiser kitchen. I would love to use it for Diamond but I'm not sure if I can. So I'm stuck for now. If anyone could help me it will be great.
Here's my kitchen, you may find it easier to use.
http://www.mediafire.com/?rx2twayzkn1
Just tried it. It works ok. Just a quick question. How do I remove unwanted packages. Should I just remove them from the casserole folder?
lolek74,
What do you mean by "My goal is to remove all unused applications from the ROM". Is that unused by yourself or do you mean to create a stripped down ROM removing as many apps as possible.
The later is what a few of us have been looking for and it would be great if you could create a ROM like that.
lolek: r u Polish?
^.^
Anyways, after the "concat" part, you will have an OEM folder and a SYS folder in casserole.
Each package (nearly) is prefixed with package_diamond_xxx
Some of them have accompanying language/mui folders
You can delete any pair you don't like.
Be careful while removing SYS packages though, or OEM_prefixed packages.
I'm not but my friend's wife is Polish and theirs children always watch bolek i lolek movie. Hence my nickname. I'll give a shot and report back tomorrow. Thank you.
i have a problem with extracting core files, file not found on the end
xip_e must be in casserole. but i can`t find it
This usually happens if you're trying to extract a "protected" ROM like bepe's, DP, Swift or Dutty's.
ok, i try another rom thank you
i tryed several roms but have the same problem also from htc NLD
how can i get the right rom
I have managed to remove some application. However After 1st boot I get message that Opera cant be find. Also how do I:
remove empty folder (games)
Update to Framework 3.5
update to latest OS.
Help highly apreciated.
I will make short tutorial for anyone who wants to try make their own rom.
lolek74 said:
I have managed to remove some application. However After 1st boot I get message that Opera cant be find. Also how do I:
remove empty folder (games)
Update to Framework 3.5
update to latest OS.
Help highly apreciated.
I will make short tutorial for anyone who wants to try make their own rom.
Click to expand...
Click to collapse
That tutorial would be very, very cool ! Good luck with you ROM making. Hope that you can finish it and share your steps with us wannabe cookers. Thanks in advance !
when i`m extracting system files
i get this message in the logfile
Error: ..\source\Part02.raw is not a valid IMGFS file. Exiting.
what does i do wrong.
I need help. How can I update OS and Framework. It will be great if someone could help me please.
skippydvd said:
when i`m extracting system files
i get this message in the logfile
Error: ..\source\Part02.raw is not a valid IMGFS file. Exiting.
what does i do wrong.
Click to expand...
Click to collapse
Skippy:
the menu on the right is for rebuilding a dumped ROM (*.raw) whereas the left hand side options are for cooking a prebuilt .nbh
I guess you are trying to use the right hand side options for an nbh? This is why you get this error. OR, you didn't place Part01 and Part02.raw in the "source" folder.
Hi there.
The HTC Diamond has recently been released in Canada under Rogers and I'd like to backup the stock rogers ROM for safe keeping (and sharing).
I've been trying to find instructions on how to do this and found:
http://forum.xda-developers.com/showpost.php?p=2370527
Which is great, but after creating the RAW rom dumps, how do I flash the ROM backup back to the device?
Thanks!
noob edit: I apologize if this has been covered in the past. I have tried searching but surprisingly, I haven't found anything...
In my continuing research, I found this tool: HTC ROM Tool
http://forum.xda-developers.com/showthread.php?t=311909
I recall seeing this on a diamond wiki page. Is there an updated version that has Diamond rom support?
Thanks,
No one here can help a lonely noob trying to learn? Is what I'm asking even possible? Thanks!
I'm a noob too, but what you do is, you get one of the kitchens, put the extracted files in baserom (or similar folder) extract all sys and OEM packages, then adjust it as you wish (by deleting), and create new rom with HTC rom tool, and then you flash it back.
I'm beginner myself, but this should work.
Make sure you have all Visual C++ and NET. packages installed on your PC, and try to install the kitchen directly on C:/ drive. It helps.
I got the Rogers Diamond last night as well. I extracted the Part0x.raw files (as per Pof's instructions), then used a kitchen to extract the SYS/OEM from Part02.raw and the XIP from Part01.raw.
I haven't cooked them yet to test, but will try tonight hopefully and maybe post it if I'm successful. I got a brick when I tried making the OS ROM out of an existing ROM, as described in the Hermes and Elf DumpRom wikis. So I guess cooking it instead is the safest way to go.
Also remember to flash the unsigned Hard SPL 1.93 by OliNex after you back up the SPL.
hello,
one possible solution is to use a kitchen. for example:
http://forum.xda-developers.com/showthread.php?t=452184
put your raw's to BASEROM-folder.
put your original provider-rom in the same folder.
start !BEGIN
now you can select between two EXTRACT-MODEs.
first mode is extract ruu_signed.nbh only.
the second is for raw's with ruu_signed.nbh.
USE THE SECOND and wait until its finished.
now you can change or tweaks something - if you want.
follow the instructions and than you have your flashable rom.
BUT THE BACKUP/COPY - ROM is not for 100% the same like on your device.
for example: you have installed some programs with serial-key or activating by internet.
after restoring you have to enter/activating again.
some files will be changed back by original rom-files like the registry.
your personilized startmenu goes away - tweakees will lost.
the reult:
you will be angry.
after some experimantells now i used a combination of own cooked rom (with tweeks and buyed programs) and a backup-file which is not so big in MB.
okokur
Hi,
I searched around and yet I couldn't find much on ROM dumping
Do you need a different utility for a different device? I'm guessing there is one for Diamond but I couldn't find one yet
Also, what do you need to do before dumping a rom? (is unlocking required etc.)
butterdori said:
Hi,
I searched around and yet I couldn't find much on ROM dumping
Do you need a different utility for a different device? I'm guessing there is one for Diamond but I couldn't find one yet
Also, what do you need to do before dumping a rom? (is unlocking required etc.)
Click to expand...
Click to collapse
No unlocking won't change your ROM so unlock away!!
There is a utility that does the dumping for you and here it is..
Er... I don't quite understand how that works....
The instruction says..
Install EnableRapi.cab on the phone.
Run Partition Addresses.bat.
Read Partition.Addresses.bat to find the four addresses.
Edit Dump My Phone to include the four addresses in place of the words.
Run Dump My Phone.
Rar and Send!
-------------------------
Should I do this while the phone is connected by activesync?
Also, once I run Dump My Phone, it gives me an error that says that the device isn't ready.
You can try my dumping kitchen, it's very simple to use!
(sorry, it's german ^^)
Steps on how to dump an unprotected ROM:
- place your RUU_Signed.nbh inside the kitchen
- start "1a. Entpacken.bat" to unpack and dump the NBH file
- start "3. Packages erstellen.bat" to make packages inside the dump-folder
- pick out what you need from the dumped ROM
Good cooking!
you get two ways of "dumping rom".
both ways get an other result.
about your asking for first way, i think you are a beginner.
your problem will not the dumping of roms,
the problem would be getting the dumping-file back to your phone.
i think, you read many or some threads where you think to get easy answers.
but the answers would be allwasy the same "google/search for answer"
its not a good time for hardcore beginners ...
please try to explain with simple words, what you have done and what you want do.
(not only for your brain, take your fingers and make "tik tik tiktik.." on keyboard ...
i asking this to you becaue for cooking and flashing you dont really need the specified answer of dumping roms. some kitchens looks BOAH-NOTHING UNDERSTAND, but at most, you need only copy ruu_signed.nbh to BaseRom and klicki-klicki BEGIN or START. than you get the rom-folders with easy understanding names (at most). for not needed programs delete files or folders. for the games you can delete all entertaionment-folders. for delete welcome.exe you have to delete one folder welcome.exe and the file welcome.exe.
this example is easy and at the same time one of the difficults thing by cooking. delete entertainment makes no problems. but delete welcome ... you have to know, what you do before you do it. without welcome.exe you cant fix your display with display-coordinates. and you have not the correct time. for getting a solution you need to study forums ... the coordinates of display can find in registry - > if you checked the registry before you starts to cook/flash. to get automatic time you need registry again, but its hard to get them.
sorry for big answer ....