Has anybody succeded in installing Tomtom 5 om BlueAngel with WM5? I was trying the proposed solution from another post where you should put the .cab files on an SD-card and then installing them from there. The result I get is that the the installation of the first cab file was unsuccessfull, nothing else.
I'm wondering if there is any other (working) way of installing the program, and getting it running with the maps.
Any ideas?
I think that TomTom has to provide an update to support WM5.
This should not be a "WM5 on BA" Problem.
I installed it by copying the files to the sdcard and running then from there, once its running, after the initial setup, I choose a map, then it just exits.
XDAiis
WM2005
Solution in the WiKi
Can't find the solution. Where should I look? URL please !
I got this problem aswell,
I put the cabs onto my SD card and ran them, they all install fine, then upon running TTN5.1 it goes through the wizard then after i select the voice it bombs out.
Most annoying
Hi
Please help me before i go completely mad. I cannot get those pesky maps to install. I am installing from the original tomtom 5 cds in the Software + maps of western Europe version. The main software and UK jane voice all install Ok. But when i insert the second cd and select any of the UK maps option the install programjust disapears. I tried doing a Hard reset on my Universal and starting again. Still get nothing. When i run the TT sw it says "no maps found".
Then i stumbled accross this thread read it through and see that there are many more hurdles needed after i get the maps but found a few usefull threads on maps so. I did another hard reset and tried the suggestion of copying the Cab files direct to my SD card and running from there this time I get the message "Installation of Great_Britain_Plus was unscessful" I have tried this on 2 different SD cards a 1 gb and a 4gb both with plenty of space.
I would be really greatful for a step by step guide or a pointer to the correct thread on this or any other site. I am even happy to pay someone who lives in London to install for me. I am going away on a driving holliday in the UK next week and was hoping to use GPS for the trip but am feeling a bit dissapointed about it now.
Many thanks for any helpfull suggestions
Regards
Try putting the SD card in a reader and install the new map to the card reader (you get the location - where to install option during the install process) instead of on the PDA through active sync. Then simply open Tomtom and go to options and select change map and select from the one/s that you have installed through the card reader.
Hope this makes sense, and possible helps
put the maps into your root of storage card , remeber to keep the orginal names of foldesr. it looks like this in my case..
\storage card\great_britain-map.v5.66
you also have CurrentMap.dat file put in the TomTom folder in My Documents and creat empty TomTom folder in storage card. voices should be put it Voices folder of the storage card .
cheers, cudo
hope it helps ..
get the lastest update from the tomtom website for the universal otherwise youll have trouble getting it to work the isnt set to write protect is it
TomTom 5 latest version is 5.21. That said, the map installation software is horrible.
The only way to install the maps is to specify to a memory card. Do not use the install to Pocket PC or Folder. Select Other and use a memory card.
It goes very slowly ... so have some patience, get some coffee/tea/snacks while you do this.
I can't believe that this is a commercial software. It just not workable in this manner.
I've just installed TomTom 6 on my orbit and when I run the program I get the error 'No Maps Found' and wondered whether anyone could help me.
I know I have to create a TOMTOM folder in My Documents and add a CurrentMap.dat file but I need to know exaclty what text goes in this as I've read conflicting arguments. Also wondered if anyone else could help me as I'm really stuck here.
THIS problem happens when you start the bluetooth explorer from the program menu
do a hard reset and rinstall your tomtom
Or buy a legit copy and install it normally?
Go to settings > connections > bluetooth
and untick bluetooth explorer! Then it should be fine.
Hard reset????
bluchrome gave the answer, a simple switch!
you need to copy the maps straight onto the sd card then soft reset and if you do not need to activate that particuler map........hey presto you should heve the map...........let me know if you need more help, regards
Hi All,
Anyone know how to install Tomtom Navigator on Storage card?
Similar question applies to other CABs I have I would like to know for those which do not offer choice of destination installation, how to install either alter tha cab to give the choice or other solution?
Please can you help?
I asked similar question earlier but only answer I had was to use WINCE CAB Manager which I don't know how to change...
Thanks
Whenever I install Navigator it gives me the choice of storage card or device. Do you not get those choices? And it still installs a lot of files to the device even though I chose storage card, I think it's unavoidable.
Can you send me a link of TomTom Navigation software so I would discover out and tell you ?
The way I did it was to install TomTom onto the devices internal memory as normal then move the program files directory etc over. Point the shortcuts into the correct exe location and it all works perfectly fine. Even after flashing the device several times since I'm as yet to reinstall it as I don't need to!
I have a new copy of TomTom Navigator 7 and want to use it on my HTC HD Mini. It was supplied on a 4GB card but as I've got a 16GB card installed in the phone I've copied the contents over.
Originally I fitted the memory card they sent me into the phone but it kept reporting that this version was not compatible with this phone.
How did others manage to get this working on the HD mini...
Roy_s
If you use "search feature", you'll find a lot of post about Tomtom...
The official version is not compatible with HDmini, you have to look for another software version, modified...
Thanks for the reply, I did read some of the other posts but thought that they had managed to get the new version to work. I've used an older version (WM5) on an older HTC phone for a few years. The HD mini being the newer 6.5 you'd have thought it would work and still be compatible........
Roy_s
Like you , i've been disappointed to notice that Tomtom is unable to sell a correct version for a new mobile like HDmini while you can find one easily on the net .
I have asked them about this without correct answer at that moment !
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Roy_S said:
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Click to expand...
Click to collapse
If im right, im still using this version succesfully:
TTN_7.916.9192_QVGA_black_fixed_BT
You need the QVGA version with the Bluetooth fix, or else you will get errors.
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
No problem, I have purchased the latest Navigator 7 from TomTom, just need help from everyone to get their software working.....
Roy_S said:
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
Click to expand...
Click to collapse
The cab is Navigator 7 (TTN=TomTom Navigator). I can't imagine you can't find the file after a thorough google search...
Yes, there is some GPS lag. This can be solved by installing GPSmod driver:
http://forum.xda-developers.com/showthread.php?t=571266
Tomtom7 working perfectly in hd mini.
Hello, is more 'than a year I use tomtom 7 - although I prefer (IGOPRIMO1.2) per hour with only ris.480X272 - TTS, but much more detailed than the TomTom. I'm leaving screenshot .... screenshot4 in particular. Here's the data that I use TOMTOM WORKING PERFECTLY! Else can not .........
P.S. my vers. not to install but copy / paste to SD card. Start navigator.exe.
The only copy is on a Dutch share site that you need to be a member to download, tried a number of variations of the name but nothing labelled as BT fix.
So I tried ttn7.917.9186_vga_black.cab which I loaded to the phone memory. It found my map on the memory card and it asks for the activation code but then returns message saying its not valid..?
It's a legal map (Western_Europe_1GB) & code I purchased so should not be a problem.
Maybe I should delete all of the files that TomTom sent me on the SD card and just put the map on there in case their Navigator 7 files are causing the problem.
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
oregon69 said:
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
Click to expand...
Click to collapse
Thanks for the reply, I'm not sure I understand fully.
The cab I have loaded (ttn7.917.9186_vga_black.cab) you say does not work, which one did you use & where can I get it?
I can't find any file called navigator.exe either in the phone or on the memory card or the SD card that TomTom sent me.
Hello. You can not tell you more, because it violates copyright laws ......
I try to make you understand:
1. tomtom program:
time ago I tried (ttn7.917.9186_vga_black.cab) but I had problems .... then turning the net I found a file.zip. Inside a folder (Navigator). if you find that you just file.zip estract in sd card root. start *. exe. The version that I use are in screenshot4.
2 then you have to unlock the MAP,
ie have the license (serial number that you derive from your serial device). Your serial device appears when you start tomtom for the first time. (registration map).
I hope you understand.
Thanks for the reply, my version is a purchased copy from TomTom so I'm not violating anything I'm just trying to get it to work. The steps I've done so far are:-
Loaded TomTom 7.916.9192 QVGA black bt.cab
> Bttrayce error reported at boot up, deleted files BtCoreIf.dll & BtSdkCE30.dll, rebooted phone
> No error message
> Run Navigator, "Western_Europe_1GB map has not been activated" message
> Entered code from TomTom, message to say "Activating"
> Error "Activation failed. Sorry this is not a valid map activation code for Western_Europe_1GB"
The map is valid, it was supplied on a memory card with the activation code by TomTom, I have only copied the map to the memory card in the phone, none of the other files on the card supplied by TomTom.
I seem to have got over the Navigator installation problem but can't get the map to activate...? Its like this cab is not compatible with the latest map I have.
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Roy_S said:
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Click to expand...
Click to collapse
Read my post 9 in this thread, GPSmod driver should fix it.