Are the stylus for all Universal models interchangable? - JASJAR, XDA Exec, MDA Pro Accessories

Hi,
Exactly how similar are all the models based on the Universal platform?
In particular, will the stylus for one model fit snuggly in all other models?
As far as I can tell, the following is the full list of models based on the platform, is this correct/complete?
* Dopod 900
* Qtek 9000
* T-Mobile MDA Pro
* I-mate JASJAR
* O2 Xda Exec
* SPV M5000
* Qtek v1640
thanks,
Graham

DisplayDoctor said:
Hi,
Exactly how similar are all the models based on the Universal platform?
In particular, will the stylus for one model fit snuggly in all other models?
As far as I can tell, the following is the full list of models based on the platform, is this correct/complete?
* Dopod 900
* Qtek 9000
* T-Mobile MDA Pro
* I-mate JASJAR
* O2 Xda Exec
* SPV M5000
* Qtek v1640
thanks,
Graham
Click to expand...
Click to collapse
Yes mate, as far as I can tell. The HTC universal has only one chassis so only one type of stick. The other differencs are mainly cosmetic and software, however there appears to have been a chipset change during manufacture. I believe this was for supply reasons, not performance (can anyone else confirm/deny).
Hope this helps
Mav

DisplayDoctor said:
Hi,
In particular, will the stylus for one model fit snuggly in all other models?
Graham
Click to expand...
Click to collapse
I'm not sure you can even count the original stylus that comes with the device as fitting snuggly. The one with my JasJar was always loose and falling out. I found a better stylus though, the Styra pen and stylus combo, which I got from Boxwave.
http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
It fits much better than the original stylus. I've rarely used the pen, but it's worth having the stylus fit more snuggly.

kelford said:
I'm not sure you can even count the original stylus that comes with the device as fitting snuggly. The one with my JasJar was always loose and falling out. I found a better stylus though, the Styra pen and stylus combo, which I got from Boxwave.
http://www.boxwave.com/products/styraballpointpen/styra-ballpoint-pen-stylus-i-mate-jasjar_723.htm
It fits much better than the original stylus. I've rarely used the pen, but it's worth having the stylus fit more snuggly.
Click to expand...
Click to collapse
I have to second this. Since I bought one of these, not lost it - great
Mav

I found that my original stylus started to become loose and eventuallly it dropped out. My replacement stylus suffered the same bobble, but wrapping sellotape around it a couple of times ensures its now a snug fit

Related

A good screen protector and where to get one (XDA Orbit, UK)

This may be the wrong forum because my phone doesn't look like the icon for this board - if so, please could someone direct me towards the correct forum? My phone is an XDA Orbit.
Anyway, it came with a screen protector - which was a nice touch. The only problem is it's pretty poor (still better than nothing, mind). Can anyone suggest where, in the UK, to get a good one? I think I've used a Martin Fields one before and a Writeshield, but I can't remember how I liked either one since I don't remember which was which!
So, where can I get a good screen protector for an XDA Orbit in the UK?
I ordered mine over the net from Brando. It takes a while to arrive but the quality is good. I've got one each for my Charmer and Wizard, they ought to have one for your Orbit. It cost approx £7 (I think) including P&P.
Seach for the forum topic on screen protector and you'll get lovely recommendation from other members. There is another brand of srn pro that is heavily recommended by the members as well, not sure if you can get it in UK.
You can try eBay also if you want it fast. Just make sure you get the brand name right.
So Brando is an okay place for buying stuff in the UK then? Also, I suppose my main worry is that the XDA Orbit is the same screen dimensions the Artemis - I don't really understand, are they the same phone with a different shell? Is the Orbit a P3300?
The orbit is the HTC P3300 and you can also find screen protectors at gpsforless.co.uk
Anjow said:
So Brando is an okay place for buying stuff in the UK then? Also, I suppose my main worry is that the XDA Orbit is the same screen dimensions the Artemis - I don't really understand, are they the same phone with a different shell? Is the Orbit a P3300?
Click to expand...
Click to collapse
Well, I haven't really bought 1,000 stuff from Brando yet, but from my 2 experience with them, they are good in terms of speed (considering the process of it getting from HK to UK), packaging and quality of their product. I dont have an Orbit, but if you (and epmulligan) can confirmed that an Orbit is a P3300, then this ought to do the job . Dont worry about the picture showing you the Palm PPC. Check the words under the description on the compatible devices when ordering.
ANYWAY, chances are, if you were to buy a screen protector for a 240x320 device made by the same company, chances are, the size should be alright (e.g. chances are, the manufacturer will be using the same screen all over).
BTW, did you search the forum for other advises. There are some other brand which the members here also recommended. See if they have Orbit specific ones and probably UK delivery.
UPDATE: I had a look at the screen protector offered at gpsforless for Orbit, which is a 12 pack for £5.99. I've tried some similar 3 pack set from someone from ebay and the quality is REALLY different. Hence, I would advise you not to get it from there.
Thanks for the advice guys, very helpful.
If you don't mind waiting a few days for delivery from the USA the Boxwave Cleartouch Crystal is second to none. I used these on my XDA2i and now on my Orbit.
http://www.boxwave.com/products/cle...h-crystal-screen-protector-htc-p3300_2421.htm
I got mine from this ebay seller dx_accessories
He sells the multi layer stuff and I can confirm it does work. Two main differences from the O2 supplied protector. 1, the top layer is much harder and much more resistant to scratch. It is also smooth (glossy finish) and the stylus glides over it with ease (not the case with the O2 protector). 2, the so-called 'gel' layer that adheres itself to the screen works brilliantly. It left zero air bubble with very small effort. I spent 15 mins getting dust and air bubble out of the O2, this I spent 1 min getting the screen squeaky clean and it sticks on to it perfectly. The size is also perfect, leaving no more than 0.3 mm to any side.
The only problem I have is the glossy finish, making the screen a bit more difficult to see under strong light. I own a Wizard and had a similar protector for similar price but with a matte finish like a normal LCD monitor.
It comes with a screen wipe which is handy. I won't complain for GBP4 all in.
humps said:
I got mine from this ebay seller dx_accessories
Click to expand...
Click to collapse
Looked for him and it apears he has nothing at all on sale at all at the moment.
I remembered where I got my writeshield from - globalpositioningsystems.co.uk so I spoke to them on the phone, found the one for the Orbit and ordered it. I just figured I'd stick with what I know because I was satisfied with it before. The main reason I chose this was because the guy on the phone could guarantee me it would fit the device.
I bought mine at http://search.stores.ebay.es/DuraSe...sooZ1QQfsopZ1QQftsZ2QQsaselZ136025443QQsofpZ0
Very quick and impressive quality.
Regards
It turns out the person I spoke to at globalpositioningsystems.co.uk was wrong. The writeshield they told me to get is too big...

LOOKING TO BUY BA IIS or equivalent

I am looking for a good condition 2s as first choice but offers on pda2k etc.
If anybody has one to sell please let me know, and thank you for your time.
I have an sx66 that works perfectly. It has a 1Gb SD, case, cradle, and retractable usb cable/charger for the car and wall(in case of travel), invishield screen protector and it already as wm6 on it. Care to make an offer?
This is the one without the camera, correct?
got a O2 XDA IIs, with camera one.. condition is average not for fussy.. 6/10 sue to some paint peel. have G-Masked with carbon fiber pattern wrap. so exteriorly looks better. Only has charging dock + handset + battery + stylus.. WM6.. fully installed with htc theme.. i only accept western union because its the fastest.. i have an paypal but i dun thrust them...
afbcamaro said:
This is the one without the camera, correct?
Click to expand...
Click to collapse
There is no camera on the phone.

P3300 Housing cover on O2 Orbit???

Hi, I'm from Portugal and I have an O2 Orbit and I need a new housing cover, but since the O2 isn't on sale in Portugal I was wondering if it is possible to use an HTC P3300 cover instead??? Anyone tried this already???
I might be able to help.
is the cover your after for the battery.. if so pm me and i can send you one out. its an old one i had from my old uk 02 Orbit. Im not sure if the p3300 will fit. maybe some one else can help you, but I dont mind sending it out ya,it's just sat here doing nothing, its is a little worn on the silver bits but better than nothing
mavisdavis - Actually I was thinking about the whole cover, battery front and back, but in fact the worst part is the battery cover... If you say you have a battery cover that you don't use and it isn't any trouble to you to send it to me, I'll sure be thankful!!! I'll pay for the ports of course... If so PM me, ok???
Nevertheless my question remains, is it possible to use a P3300 cover in a O2 Orbit???
Thanks in advance
Hugo Costa
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
hcosta said:
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
Click to expand...
Click to collapse
Can't imagine postage to be that much, as these are very light, I would accept £30.00 gbp for it, it is in very good condition and I will include 3 stili as they are different to the orbit one's.
Jester01 said:
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Click to expand...
Click to collapse
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
ryomahino said:
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
Click to expand...
Click to collapse
Sorry to say, but it's the same mother board, so check before you post !
And I've had a p3300 oem HTC housing on my orbit for the past few months, yes you are correct with the battery lock, but that's an addition 02 have added.
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
elatirio said:
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
Click to expand...
Click to collapse
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Jester01 said:
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Click to expand...
Click to collapse
makes sense. thanks for the feedback
Jester01: Thank you for your offer, but i managed to get a cover around here, thanks anway.
Case: Artemis vs XDA Orbit
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
sasha817 said:
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
Click to expand...
Click to collapse
They are 100% exchangeable...
Jester01: Thank You pal! Now I would buy XDA's one, 'cause I like it better ^^
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
feridoun said:
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
Click to expand...
Click to collapse
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
sombatsombat said:
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
Click to expand...
Click to collapse
Thanks, I'll open it up and take a look at the connections - maybe the screws need a bit more tightening.
They both cost around £25 and it's all made of plastic - painted plastic although the XDA case is certainly better quality than the htc design.
I still have the HTC housing which is 'as new'. I'll sell it for £20 if anyone's interested.
How to open the XDA Orbit
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
hqqh said:
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
Click to expand...
Click to collapse
I did find some instructions by googling, I think the trick is to peel off the rear part by levering the stylus in it's port.

touchscreen XDAIIs and XDAIII - the same ? what about this ebay offer ?

hello,
there is a cheap offer for XDAIIs touchscreens on ebay.
i have a XDAIII - not a XDAIIs - i have a PB20B1 (board id 5) - not a PH20B.
does somebody know, if this touchscreen would work on my device ?
thank you!
xda 3 and 2s are the same model.
it´s just the provider name.
(the "real" name is HTC BlueAngel)
in germany its called xda 3 and in usa and england it is called 2s.
but thera are 2 different display types for the Blueangel !
watch the wiki
hello,
i readed the wiki: ok IIs and III should both be board ID 5 - and so they should both have the sony display.
but: the seller says for IIs and for PDA2K ! pda2K would be board ID 6 - so it's not the sony display ?
i don't get it ? does he not know, what he's talking about - or are the displays different - but the touchscreen the same ?
do you know ?
thank you very much.
that should help.
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
hello,
actually the wiki does not really answer my question.
i only want to buy the touchscreen-digitizer (only the glass and the digitizer-foil) - not the whole LCD.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170201516276
Since the sellers at ebay can't tell me, if their touchscreen is for the toppology-LCD (i assume, cause i think in USA might me more toppologys than sonys ??) or for sony-LCD i want to make sure to buy the right thing.
so, there are 2 different LCDs - but do they maybe have the same touchscreen-digitizer (glass and foil) ? if so, i can buy it without doubt.
thank you!
are you german ?
(because you have a xda 3 that is only sell in germany)
hello,
i bought the XDAIII used - from a german guy.
Both touch screens are the same, the difference is in the connector to the back of the lcd, one has wide spacings , the other thinner, the one posted in your ebay link is the thinner one. the only way to tell what screen you need is to look inside. Also the thinner screen has two holes either side the tracks, the wider spaced tracked one has one hole in the centre of the tracks.
regards
Gary
hello,
sorry for the late reply:
i already looked inside my ba - a while ago. i also looked at the wiki. so i'm pretty sure i have the sony LCD.
so, does this touchscreen from ebay fit ?
thank you very much.
I've the same question...
Edit: See this link: http://cgi.ebay.co.uk/I102-Touch-Sc...ryZ41343QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Dimlow_uk said:
Both touch screens are the same, the difference is in the connector to the back of the lcd, one has wide spacings , the other thinner, the one posted in your ebay link is the thinner one. the only way to tell what screen you need is to look inside. Also the thinner screen has two holes either side the tracks, the wider spaced tracked one has one hole in the centre of the tracks.
regards
Gary
Click to expand...
Click to collapse
I got lcd with 'wide' tape and just bought a replacement digitizer with 'thin' tape.
I think I'll manage to solder them together.
Question is..
Will it work? If I've done it properly, will it work? (i'm kinda smart with soldering iron xd)

eBay - Housings

Hi,
I would like to buy a white housing for my MDA Touch from eBay, but there are lots of different prices and sellers..
Can you recomment a good eBay-Seller?
Are there any differences between those white housings?
I also need a new Digitizer, because mine has a lot of ugly scratches...
And of course I need to buy a keypad, because my keys have a different shape..
Did you have any experiences with buying housings in eBay?
Can you recomment any shops?
The most important point is the quality and the fitting!
It must fit perfectly, otherwise the housing will get damaged again (due to higher pressure...)
I am hoping, that I do not have to experience this again!!!
Please help me!
I had been looking for days and did not found anything useable....
greetings
touch-it
(Sorry for my English, I´m German! Please do not hesitate to correct my grammar, if there are any mistakes!!!)
I bought one a while back off ebay just got the cheapest one i could find, from china, it seems to be pretty much identical, but it didn't come with a digitizer
Mine was for the standard htc elfin
Hi,
and did it fit perfectly?
Did you have any problems while changing the housing?
Thanks in advance!
Greetings,
touch-it
edit: Do you know, what the name of the shop is, where you have bought the cover?
I also have to take the one for the standart elf / HTC Touch GSM
I got a nice white case for my standard htc touch elf,
with buttons and chrome sides fitted just fine no problems for £14
($16-$17) also from a guy from Hong Kong...
Mine fit's pretty perfect as far as i can tell theres no difference.
Fitting is simple enought bit of common sense doesn't hurt
Tr1g

Categories

Resources