Greetings -- I've upgraded to BT 3900 for Motorola HS850 hands-free, which works, although with static.
Now, I got i-tech Clip, and it worked as a hands-free as well. But read on.
I wanted to try it as high-quality audio setup, so I got the profiles -- although for build 3500 -- off the ftp. It did show that profile, but quickly failed to dicover the service on i-tech. As I deleted the hands-free profile, I try to get at least that back. Alas! Now it doesn't connect to hands-free i-tech either.
I've tried: installing 3500, 160.600, -- still discovery fails. What's the rollback procedure to get 3900 with its profiles back?
Braver, I also have Clip S35 from i-Tech. It works so fine with my Xda II (Widcomm Stack + Handsfree Profile and A2DP)
Did you try to reset your Clip S35 and try to pair it together again?
How did you get the A2DP profile? I've installed the profiles for build 3500 from the ftp, it added high-quality audio (is it _the_ A2DP?). I had BT 3900 by then, then reinstalled various versions after i-tech could not be found the second time.
Is it OK to install the extra profiles for build 3500 with 3900?
And, when you do get an audio profile and a hands-free one, how you differentiate -- say, you listen to music and receive a call?
Sorry braver, I misunderstood ...
What I've is :-
1. O2 Xda II
2. O2 Xda II Mini
3. i-Tech BlueCON
4. i-Tech Clip S35
5. IBM X31 (My Laptop)
And I played with them like this:-
(O2 Xda II Mini + IBM X31 + i-Tech BlueCON + i-Tech Clip S35)
I pair my Mini with Clip S35 with the Handsfree Profile. I also connect my BlueCON to my X31 (plug the audio jack of BlueCON to the audio output jack of X31) and pair my Clip S35 with BlueCON.
When I listen the music from my X31. My X31 send the audio output to BlueCON and BlueCON stream the audio data to Clip S35. So I can hear the music.
And when I have the incoming call on my Mini. My Mini connect to my Clip S35 so my Clip S35 stop the music from BlueCON and go to Handsfree Profile Mode. After the hang up the phone line, Clip S35 start the music again automatically.
==================================
For BA, I've seen from the forum but it's Thai language:-
http://www.pdamobiz.com/show_news.asp?NewsID=41062&PN=1
They said that they installed PDA2K_BroadcomCorp_BTUpdate.cab from xda-developers.com like you did and every was so fine.
Please try to check and let me know if there's what I can help.
(Also, don't forget, PIN for Clip S35 is 8888. It's not 0000)
I.tech S35 paired with WM2003 SE with Widcomm 1.6.0600
Guys, help.
I have a WM2003 SE unit with Widcomm 1.6.0600 stack and I just acquired an I-tech S35. I have the following things working:
1. Mp3 over bluetooth using Windows Media Player 9 and the high quality stereo profile.
2. Headset connection for outgoing calls.
I have the following problems:
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
4. I've tried calling out and the person I call always says that my call is very unclear.
Does anyone else have problems like this or has been able to resolve these problems? I could use the help or I'd be forced to sell this unit since it's practically useless to me with particularly with the second problem.
Thanks and best regards...
Winston
Hi wsabido168,
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
Ave*: I don't think that I have the interference problem but the sound is not come out smoothly. I hear the noise like you cooking the pop corn around every 15 seconds per time. You should try to contact to the shop that you bought it and ask them to try with another one.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
Ave*: Mine is not. I can receive the incoming call from S35. I feel like there's something wrong with your XDA II.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
Ave*: You can turn it on and off. Please check from the manual. It said that you need to press the button (I can't remember which one) to on and off the buzzer mode. (This problem may relate with your 2nd question, I just guest)
4. I've tried calling out and the person I call always says that my call is very unclear.
Ave*: This question may relate with the 1st question. Mine is clearly (I asked from the other side)
Hi Ave, first of all, thanks for the information.
May I ask what software you have on your system? for example, what bluetooth stack you're using and what version of the OS? Maybe I can reflash my OS to whatever you're using to get it to work properly.
Thanks and best regards...
wsabido168, you're welcome ... I've 2 of XDA.
The first on is my XDA II:-
ROM: 2.06.00 WWE
RADIO: 1.18.00
ExtROM: - (Big Storage)
Bluetooth Stack: Widcomm Bluetooth Stack 1.5.0.2000
The secound one is my XDA II Mini:-
ROM: 1.12.00 WWE
RADIO: 1.13.00
ExtROM: 1.12.119 WWE
Bluetooth Stack: Microsoft Bluetooth Stack
questions:
1. with the XDAII running Bluetooth Stack 1.5.0.2000, where'd you get the Bluetooth Stack 1.5.0.2000? how do I download and from where it?
2. when you're using Bluetooth Stack 1.5.0.2000, can your XDAII receive calls and automatically redirect it to your i-tech S35 even when you're playing mp3s?
3. with Bluetooth Stack 1.5.0.2000, do you have the profile for "high quality audio" with which to use the mp3s over bluetooth?
Thanks and best regards...
Winston
Answer 1
Read from here:
http://forum.xda-developers.com/viewtopic.php?t=17186&highlight=bluetooth+headset+high+quality
Widcomm 1.5.0.2000 File:
http://forum.xda-developers.com/download.php?id=2379
Registry File:
http://forum.xda-developers.com/download.php?id=2378
See here for the picture:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=39555&PN=1&TPN=1
Answer 2
I think the answer is No,
XDA II has the Microsoft Bluetooth Stack installed from the manufacturing. It has Headset Profile but no A2DP (High Quality Audio) available. But if you want to have A2DP on XDA II, you need to install the Widcomm Bluetooth Stack.
The stack from Widcomm has A2DP and can be run on XDA II (but not work on XDA II Mini)
After you install the stack from Widcomm, you'll be able to listen MP3 using Clip S35, but if you want to use your Clip S35 to answer a call, you have to stop the Widcomm Stack and start the Microsoft Stack instead.
Microsoft Stack and Widcomm Stack can be run on XDA II but not the same time.
Answer 3
Yes, Widcomm 1.5.0.2000 has A2DP See Answer 1 for more detail.
Will it work on WM5?
I haven't try it yet but I don't think that it will work on WM5. I'm not so sure, still need someone in this forum to answer for us.
Do you know?, i-Tech has a A2DP software for Symbian OS. It's BluePlayer which I used to try on Nokia 6600. It's really cool because you will be able to listen to the music with high quality audio, also you can answer the phone call with this Clip S35 too.
I used to contact to them to asked for the A2DP software for my Magician. But the answer was they didn't have a plan to do it yet.
Has anyone managed to get Widcomm A2DP working with the headset profile?
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Hey guys,
Thanks to all the information from you guys, I have gotten it to work (A2DP and bluetooth with my S-35 headset and XDAII (installed with WM2003SE) but still have a problem with the fact that the Broadcom does NOT permit received calls to be redirected to the headset therefore giving it less functionality than if I were using a Nokia cellphone with this headset.
If anyone has a fix to this problem, please let me know.
Thanks and best regards...
Winston
Winston, I took a long time to search on the internet but nobody could give me the information to fix it.
Somebody said that the problem of Headset Profile from Widcomm Bluetooth Stack and Xda II is about the Audio Gateway and Wave Driver. The Wavedev.dll didn't redirect the audio output to Handfree Profile of Widcomm Bluetooth Stack. This is all that I know about.
Anyway, nice to talk to you. Feel free to let me know if there's somethings that I can help or what we can share.
Ave*
ok. thanks again Ave.
3waygeek said:
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Click to expand...
Click to collapse
I'm on WM2003 Rom 1.40 with WMP10. I can get A2DP working as well, however headset doesnt work properly then (IE can't take calls on the headphones).
Also another annoying problem is that WMP10 turns off after 5 minutes (ie screen goes blank), this interrupts the A2DP session, and I have to reconnect.
is there somebody here tried software like BTaudio, BTToggle, bluemusic, or something else (if any)??
i tried all those software to my BA with win 2003se but all weren't working, and after i upgrade to wm5 (helmi with new bluetootoh stack) still not working. but actually those software working with other pda with wm5 (like xv6700 and i730)
note: there's no problem with stereo headset like i-tech r-35 and jabra BT620s
but i my mono bluetooth (jabra bt110) working also, because its small and using standart battery a3
thanks for any help
Qprett
I've tried with Bluecast, it works on my Qtek 2020i which uses WM2003 SE
http://www.simplesmartphone.com/BlueCast/
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
Has anybody managed to successfully re-direct their Trinity BT audio to a non A2DP handsfree kit?
I have tried a couple of the cab's and registry hacks in other parts of the forum with no success.
Bluetooth handsfree works fine, for phone calls.
Main thing i want to do is got my voice command to use my handsfree mic, and not my phone mic....
Be nice to re-direct tomtom too, but that would just be a bonus really.
A2DP Hack
Just got this hack form my friend. & test it's OK on my Trinity... But, it's a bit tricky that only work in .mp3 format. .mwa same.
Ok, that did nothing for my phone.
Do you need to assign the application a button or something?