Hi
I recently bought a 4GB SD card for my SPVm600. Unfortunatly my device does not read it.
Does anyone know where i can get a patch to read the protocol.
many thanks
Phil
phil_fenton said:
Hi
I recently bought a 4GB SD card for my SPVm600. Unfortunatly my device does not read it.
Does anyone know where i can get a patch to read the protocol.
many thanks
Phil
Click to expand...
Click to collapse
4 GB Top Ram SD working fine in mine SPV M600.
I bought this one
http://www.7dayshop.com/catalog/product_info.php?manufacturers_id=&products_id=102082
where did you buy yours from?
I bought one of those too, make sure they didn't send you an SDHC one or it definitely won't work.
Related
hello all.
i bought today one micro sd 4GB and one 1GB (scandisk). i tried both of them in two different xda ordit phone and none of them is working!
what am i doing wrong??? do i have to install them? how??? plz help!!! thanks!
are they standard micro sd or micro HCSD, if they are the HCSD version you need to install a patch.
Finally both of them had problem!!! unlucky! thanks for the reply!
ios_4 said:
Finally both of them had problem!!! unlucky! thanks for the reply!
Click to expand...
Click to collapse
I also suffered this problem, and the solution is as simple as strange. Do you have a camera with sd (if you have an SD adapter)? Put it into the camera card slot, make a format from the camera and voila! Try it into the mobile.
Tell me if it works
Regards
I got a new 8gb sdhc for my Tmobile Dash without checking to see if it would work...my mistake...coz' it doesn't even detect the card...I read on the forums how upgrading to the HTC ROM MIGHT enable my phone to read the card but so far I haven't seen anything definite...can anybody point me to the right direction to start looking? Thanks in advance...
Sure thing.
Here...
flash your phone with the latest rom "RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422 .1
I have 2 t-mobile dash for my company. I flashed them both with the latest rom: RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship. I also have the 8-gig Sandisk and it works flawlessly...
naars90 said:
I got a new 8gb sdhc for my Tmobile Dash without checking to see if it would work...my mistake...coz' it doesn't even detect the card...I read on the forums how upgrading to the HTC ROM MIGHT enable my phone to read the card but so far I haven't seen anything definite...can anybody point me to the right direction to start looking? Thanks in advance...
Click to expand...
Click to collapse
thanks...just needed to know if it works...much appreciated...
4 gig A-data works
put in a 4gig sdhc class 6 - works. though sometimes seems to have problems locating files - ie songs. could be just with the phone though.
You might want to install this cab:
ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Cabs/SDHC Support Kit.cab
Cheers
Before when I had the MicroSD (2GB) on my Hermes I was using it to upgrade any O.S/Radio ROM directly without the P.C, but now after changing it to the (8GB) one (same brand -Sandisk-) I'm unable to do the same procedure, although nothing has been changed except the MicroSD capacity (8GB insted of 2GB)!!
Is there anyway to fix that?
the official Max. SD ccard for Hermes is 1 GB, and the experts on this website said the 2 GB card can be accepted also on Hermes...
I hope I'm wrong
farres said:
the official Max. SD ccard for Hermes is 1 GB, and the experts on this website said the 2 GB card can be accepted also on Hermes...
I hope I'm wrong
Click to expand...
Click to collapse
The (8GB) I'm having is working fine and very well on the Hermes for the Programs, Camera, Games, etc..., but the only thing which is not working is the upgrade procedure only !!??
so, why dont you use the 2gb to upgrade with? I've got 3 sd cards 256/512 and my 2gb. use the smaller cards to flash with and the larger as my "working" memory. It maybe the os has sdhc support but not sure if the hermes does itself considering you are pretty much reformatting memory and re-installing an os. Might be that there is a certain size you can't go ove rwhen re-flashing. Just a though.... Cheers..
FirasKB said:
The (8GB) I'm having is working fine and very well on the Hermes for the Programs, Camera, Games, etc..., but the only thing which is not working is the upgrade procedure only !!??
Click to expand...
Click to collapse
is it fat32 formatted? because that's what u have to use for the formatting method that may be your problem
it is because the SDHC is not compatible from bootloader as it does not use the necessary drivers from the OS.
ph03n1x said:
is it fat32 formatted? because that's what u have to use for the formatting method that may be your problem
Click to expand...
Click to collapse
Yep, I've already done that, but it seems the problem is from the Bootloader as (miffymiffy) said. But in this case how can we solve it? Is it by upgrading the Bootloader, or what?
FirasKB said:
Yep, I've already done that, but it seems the problem is from the Bootloader as (miffymiffy) said. But in this case how can we solve it? Is it by upgrading the Bootloader, or what?
Click to expand...
Click to collapse
as far as i know you cant solve this problem SDHC is only supported in ROM
maybe one day someone will add it to Bootloader but for now just use the 2gb card..
Will Fat format also work? or will only Fat32 work for bootloader?
thanks in advance.
calculus said:
Will Fat format also work? or will only Fat32 work for bootloader?
thanks in advance.
Click to expand...
Click to collapse
The Bootloader can only accept the FAT32 format.
4 gb worked on my hermes
sphynx88 said:
4 gb worked on my hermes
Click to expand...
Click to collapse
They are talking about flashing from SDHC. 8Gb doesn't have problem for other purpose.
Help Me How To Install New Rom Without Pc
Hi,
Anybody tell me how i upgrade my rom through MicroSD because my mobile is not connect with PC.
thanks in advance
ialwaywanted said:
Hi,
Anybody tell me how i upgrade my rom through MicroSD because my mobile is not connect with PC.
thanks in advance
Click to expand...
Click to collapse
First off, please don't cross post. You posted the same question in two different threads.
Second, your question is answered in the wiki. I know this for a fact as I added the link to it from the main Hermes page (and just updated it not long ago).
Go read it and if you have a question about the procedure, then ask.
the reason it won't flash is that SDHC isn't compatible with the hermes without installing windows mobile 6 (early versions didnt work) or 6.1, and bootloader mode (used to flash from sd card) is out of the windows 6/6.1 operating system (which is used to read the card) so this is why the card cannot be read,
Similarly windows mobile 5 doesnt ready cards over 2gb as they are SDHC
hope this helps and you understand my explanation
Whats the maximum memory you have used on your artemis? I currently use 4gb micro sdhc without problem, but I wan't to buy 8gb or 16gb. Just want to ask first if yoou guys have used 8-16gb or even 3gb?
I am using WM6 and the micro sdhc patch.
Thank you
I tried 8 which didn't work
8 gig works fine and I use it extensively to copy data from work to home.
It works so well that I never think about it.
I THINK we can go to 32 gigs now?
8gb Sandisk micro sdhc works fine on mda compact III.
When you change the MicroSD card you have to take the battery out.
Does this hard reset the device?
Thanks in advance
pgosling said:
When you change the MicroSD card you have to take the battery out.
Does this hard reset the device?
Thanks in advance
Click to expand...
Click to collapse
No it doesn't.
Cheers
you need a sdgc enabled (cooked) rom to use sdhc cards. Official firmware doesn't support those cards. If thats the case all sdhc cards should work. I have a 8 gig caard. Soon 16 GB, 32 does not exist yet.
Registerme said:
you need a sdgc enabled (cooked) rom to use sdhc cards. Official firmware doesn't support those cards. If thats the case all sdhc cards should work. I have a 8 gig caard. Soon 16 GB, 32 does not exist yet.
Click to expand...
Click to collapse
I have the original WM5 O2 UK Rom on this one.
I dont really need a lot of space, just a bitmore than the 256 I have at the moment, so 1GB or 2GB standard MicroSD will do fine.
Thanks for all your help.
I also have an 8GB SDHC Card and it works fine. But only with the SDHC-Driver.
Kingston SDHC 4Gb and Transcend SDHC 8Gb class 6 work fine both...
Hi,
i have bought a 4Go micro SDHC card which does not work native, i downloaded the artemis sdhc cab file and 2 dll's to replace to make the phone to recognise it, but i can't change those dll's (sdbus.dll and sdmemory.dll), the phone tells me it's locked...
Can anyone tell me how to unlock it ?
thanks !
jc
Note : i use WM5
To all people of this topic saying that it works fine for them with more than 2 Go : Did you follow this topic :
http://forum.xda-developers.com/showthread.php?t=344338&highlight=SDHC
and did you have to replace those 2 dll's ? And no 'read only' problem ?
ok, thank you for all you answers
A last question, when using the soft reboot mode, i get a red/green/bleu screen, my pc recognise there is something but i can't browse the phone, i'd like to use this mode to replace my dll's... any idea ?
I have 8gb SDHC microSD which i've used before with my touch dual with no problems.
I installed artemis sdhc.cab but nothing happened...
please help...
xmarkom said:
I have 8gb SDHC microSD which i've used before with my touch dual with no problems.
I installed artemis sdhc.cab but nothing happened...
please help...
Click to expand...
Click to collapse
I have the same problem. I bought myself an 8gb SDHC card, not knowing that my device wouldnt recognize it.
Has anyone, yet, found a way to run sdhc on the HTC Wizard? I saw a lot of comments that this isnt a hardware problem, but software, and still none of them saying an exact way to do it, or if its impossible. ...
I`m using the MSD WM6.5 Rom
;
someone said that one of the ways to enable sdhc on ur device is to install a rom that supports it - is there one for the wiza?
Vik Vasilev said:
I have the same problem. I bought myself an 8gb SDHC card, not knowing that my device wouldnt recognize it.
Has anyone, yet, found a way to run sdhc on the HTC Wizard? I saw a lot of comments that this isnt a hardware problem, but software, and still none of them saying an exact way to do it, or if its impossible. ...
I`m using the MSD WM6.5 Rom
;
someone said that one of the ways to enable sdhc on ur device is to install a rom that supports it - is there one for the wiza?
Click to expand...
Click to collapse
i've found the problem.
It is "hardware" thing, probably sdhc are bigger by ~ 0,5 mm and you must try couple of times to put card the right way.
By the way, you also need Artemis sdhc driver (cab file).