PLEASE dont yell at me!!!! Error 120 tried everything - JASJAR, XDA Exec, MDA Pro Software Upgrading

ok so i am upgrading to jwrights newest 2.02 xbow rom and i keep getting the awesome 120 error.
I have tried MaUpgradeUt_noID and i get "Ruu.dll was not found".
I can not extract the files from Jwrights executable file. If I could open his "MDA_PRO_WWE_20200_20305_11300.exe" I know what to do but I can not extract the files from that EXE.
Heck if I could open that up I could put my 1.15 radio file in there and run this upgrade all at once.
I have read through the thread below and there is nothing listed about how to deal with an executable rom and the 120 country error code.
http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
I have tried after syncing it. I have tried in boot mode. I am using XP with 4.5 activsync. I currently have jwrights 2.01.06 xbow on the uni. I have tried to extract the "MDA_PRO_WWE_20200_20305_11300.exe" using stuffit and pe explorer, to no avail. Any help is appreciated. Thanks in advance

got it.
this thread was very helpfull
http://forum.xda-developers.com/showthread.php?t=261200&highlight=error+code+120
I had to go to c drive, documents and settings, admin (or whoever you are logged in as), then to "Local Settings" which is a hidden file, then to temp folder. Once there there will be folders like "{01F9CB7E-E0B1-40CD-B57E-5E91A8408C67}" in that folder will be the files you need.
Then you copy everything to a folder on your desktop. Then add the "maupgradeut_noid" file to that folder and double click maupgradeut_noid then click next and there ya go.
I also replaced the "radio_.nbf" file so I could have radio 1.15 instead of 1.14 which comes with jwrights 2.02.
I added the above instructions incase someone is as retarded as me lol. FISH

All you have to do is press the light button (next to the volume slider) the power button and the reset button all at the same time, this will reset your phone and put it in bootloader mode (The screen has text on it, but is not lit so you will need a well lit room) next plug the USB cable in wait for your computer to recognise your phone and then just double click on JWrights rom upgrade app.
PS make sure you have a fully charged battery

Related

"Un-brick" Imate JasJar After Failed ROM Update

First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Did like u said.
Still country id error
works now
thanks
my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?
help me
error 101 problem
error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?
please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

Help A Newbie once A Day with An MDA

Hi All
Have a problem with my latest phone. A so called friend told me to upgarde the ROM so as to remove all the T Mobile poop in it. So he gave me the software I started the upgrade all went well stage 1 then stage 2 and finally stage 3. It said Congrats just hit reset and the power button at the same time and its done. Easy Me thought..... Not Easy....... Its now just booting up and screaming at me. The screen wont lite up and nothing else. I have tries to reset over 10 times now.....Anyone got any ideas, have I shot and killed my new phone...
Ta JG
this is not good. do you know which phone you are having? MDA is all the phoen from t-mobile. First identify your phone. Then, you need to know if you are using the right ROM on the right phone. THEN, you have to know are you using the right phone ROM on the phone (eg G3 or G4).
Its an MDA Copmact 11 does that help....
common.. more info. which rom you've used?
Alpine_Ext-1.11.162_Radio-1.04_stuffstripped_Camera_Fixed.
SORRY i AM NEW TO THIS AND i AINT GOT A CLUE WHAT i AM DOIN...HE HE HE
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
JeanGenie said:
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
Click to expand...
Click to collapse
All I would like to do is get the old stuff back then worry about an upgarde later can this be done without me having to do unspeakable things to the phone????
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
hanmin said:
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
Click to expand...
Click to collapse
I have done what you have said, I think...DUHHHH the screen has not lit up but its now showing USB in the top and V1.02 in th ebottem. I have connected it to my computer but active sync has not cut in yet....... I assume I have done it wrong....
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
duke_stix said:
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
Click to expand...
Click to collapse
I have just downloaded the t-mobile update as below
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
I have switched off the file as you have said in the task manager. The update laods then says cannot find MDA Device connection error 274.
Could a system restart help?????
Sorry for all this, maybe stick to things I do know in the future, like washing my car.......
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
duke: I think he did that. He downloaded the EXE from http://www.tm-phonedownloads.com/download_manager_mda_com2.html
and it seems not able to detect his Charmer.
JeanGenie: Just to make sure, when you run that EXE, you have the phone connected with it displaying USB?
duke_stix said:
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
Click to expand...
Click to collapse
okie dokie...have extracted all th efiles and these are what I have got in a seperate folder
EnterBootloader
nk.nbf
README
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Thats all the files inside the folder
is "ROMUpdateUtility" an EXE file? try running that.
hanmin said:
is "ROMUpdateUtility" an EXE file? try running that.
Click to expand...
Click to collapse
I have and after a few seconds it says error 274 cannot find device....!!!!
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
hanmin said:
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
Click to expand...
Click to collapse
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
JeanGenie said:
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
Click to expand...
Click to collapse
Is there anyway of just deleting the Alpine ROM and reinstalling the correct charmer. I, as you have probably guessed aint got a clue what I am doing never lone saying...he he he
Just a thought.......
Plus my new XDA IIi was delieverd today am I being silly when I say I have been told that I can debrand it with the Alpine rom as listed above, dont want to try anything incase this phone goes belly up also....
Hellllppppp...........
Its me again, can anyone make any other suggestions to my problem please. I have tried in vain to do what has been already suggested but it seems either it wont work or more to the point I have no clue as to what I am doing.

Reverting to Factory Settings. HELP!

I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
TwoPlus1 said:
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
Click to expand...
Click to collapse
This is the quickest fix I have read about. Works with out a hitch for everyone who has done it.
Cool. I m happy I can finally do this. Although I would like to fix the keyboard instead...Anyways what solution do you guys know of that will fix the keyboard? Also where can I get that .nbh file?
Thanks a lot!!!
You can either use WinRAR to unpack it or if you run the .exe it will unpack to '\Documents and Settings\User\Local Settings\Temp'.
I would suggest going back to this ROM as a diagnostic tool to make sure the keyboard isn't faulty...Just make sure you upgrade to SPL 1.35 Olipro first as this makes your phone almost unbrickable in future! If you do brick it so either your stuck in bootloader mode or the OS won't start follow the above instructions...
Well, I know for sure that my keyboard was working perfectly fine before doing the WM6 rom. I have tried fooling around in the Registry...didn't make it worse, but didn't make it better either. What values do you guys have for the qwerty in the registry? Also is there a program that will let you program what key gets what symbol?
I know I am trying to decide between factory, or trying to fix this keyboard characters mix up...
Thanks again.
Not to over-simplify, but what phone are you using? If it's the 8525, there's a CAB file to remap the keys to right places... just search for 8525 keyboard fix.
-Steve
roace said:
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
Click to expand...
Click to collapse
Here is keyboard .cab file fix.
Thank you very much guys. I solved the issue. The fix I ended up using was; going to my local Cingular store and beaming a reg editor into the live 8525 they have there, and looking at the registry where the qwerty is located the hexadecimal value on it is 40409 (located @ local machine/software/oem/qwerty/). Please let others know about this fix for the Cingular 8525.
Also thanks a million to those who actually put a linky and not just say there is something somewhere...
Thanks again,
Cris

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

Categories

Resources