Hello
I was hoping that someone could point me in the right direction.
I have enabled the simle 4 digit password on my BA.
On an incoming call the screen becomes available to allow me to answer or reject the call. Normally when I press 'Answer' I can take the call. Then the password prompt will be on the screen.
The problem is that about every second or third call the password challenge won't show up, but the phone application is shown. There is no exit button in the top right corner, I can't make calls, I cant switch it off. The only thing i can do is that I can receive further calls.
The only way to get out of this is by soft-reset.
This happened with the original ROM. So I upgraded to 1.40 in the hope that this would fix it, but it didn't.
I have searched a number of forums to see whether other people have similar problems, but couldn't find anything.
My PDA2k is stock standard, with the only addition being Adobe's PDF reader.
I would appreciate any suggestions to solve this problem (apart from not using a Password challenge), as I'm sick to death of having to reset the device.
Thanks in advance.
Is there a possibility to overclock my Artemis when there is an incoming call? My device needs about 5 secs from powering on to ringing. I guess this could be accelerated by boosting the cpu to 270 MHz for 10 secs while receiving a call.
mhuhn said:
Is there a possibility to overclock my Artemis when there is an incoming call? My device needs about 5 secs from powering on to ringing. I guess this could be accelerated by boosting the cpu to 270 MHz for 10 secs while receiving a call.
Click to expand...
Click to collapse
Most ,if not all pocketpc phone devices need about 3 seconds before they ring ,there used to be a hack which eliminated that delay or at least significantly reduced this time ,i'll get back to you when i find it.
use smaller file for ringtone.
use .wma file instead mp3 or even .mid
My phone seems to lock up whenever I get a call and might answer after 10 seconds or might not answer at all. Has anyone else seen this? It seems to happen when I am on the phone dialler and an incoming call comes in.
It's very annoying because it means I have to take the battery out to stop it from ringing
I tried doing a hard reset and tried removing the o2 custom apps (it's an orbit) but I still have the problem.
I'm using spb mobile shell which I really like, but I'm wondering whether that's the cause of the problem
Hi. It's funny - my phone seems to ring immediately when there is a call, but an SMS is different. If off, the phone will switch on, and the screen lights up, but the text message can take up to 30 seconds before it actually displays. I know that a message is on its way now because the screen lights.. Very odd..
Hiznibz54 said:
Hi. It's funny - my phone seems to ring immediately when there is a call, but an SMS is different. If off, the phone will switch on, and the screen lights up, but the text message can take up to 30 seconds before it actually displays. I know that a message is on its way now because the screen lights.. Very odd..
Click to expand...
Click to collapse
Same problem here.
mital said:
My phone seems to lock up whenever I get a call and might answer after 10 seconds or might not answer at all. Has anyone else seen this? It seems to happen when I am on the phone dialler and an incoming call comes in.
It's very annoying because it means I have to take the battery out to stop it from ringing
I tried doing a hard reset and tried removing the o2 custom apps (it's an orbit) but I still have the problem.
I'm using spb mobile shell which I really like, but I'm wondering whether that's the cause of the problem
Click to expand...
Click to collapse
How many contacts do you have? Sounds too me you might have too many entries so when receive incoming call, WM5 take a while to match the number in contacts
The reason for this is when I am in the car and am using the bluetooth to answer the phone is in my case on my belt. When I get a call the screen comes on and even after the call is completed it stays on for 2 minutes. I then end up calling someone in the last called list if the screen bumps the case. I don't notice because my dumb car always wants to download the phonebook after every call and the stereo doesn't connect the outgoing call. Then someone tells me that they got 2 minutes of my music on their voicemail if they didn't answer. Ended up being very embarrassing when call went out and I made some comments that "someone" was not supposed to hear.
I looked with the advanced config tool but could not find anything.
Any ideas appreciated.
Tks
Perhaps stopping the screen from waking is too drastic. This means you effectively disable caller-id. I would suggest looking into installing a screenlock tool.
I am trying pocketshield for now. I was going to look at su2u but I was told that incoming calls still turned the screen on. Will see how this works for a few days.
Thanks
Well I tried pocketshield and it doesn't really do what I need. It still lets the damn phone call after I have hung up. It leaves the screen on and at the lasted called screen. bump the screen and it calls one of my last called list. Going to try Touchprolock now and see how that goes...
I have "locked" (AT&T stock ROM - using long press end key to lock) my device and then hit the power button momentarily.
This turns off the screen. When an incoming call hits, screens lights up. After call is terminated, screen turns off.
Hy guys, i have a strange isue with my N2. It calls on its own a specific number from my contacts list. And when i call that number i have a green icon showing on call screen with the mention 2 days..., like there is some timer set. I searched the forum and the net but couldnt find an answer. What setting is this and how do i turn it off? Auto redial is set to off. Anyone know?
I'm on stock rom perseus kernel.
Edit: the green icon notifies me about the upcoming birthday set on that person contact.
But the call coming from me is still an issue. And that call doesnt appear in my journal, only on that person's phone. I have to see if it's not a problem with the other phone. Not a smart one, but Samsung.
Edit 2: problem solved (i guess). I made a call about 10 hrs before the person received it. Probably a cell/connection/network issue. That is why there was no log on that person phone about my call at the time i made it nor on my phone at the time it was received. Strange thing!
When somebody calling me and I pick up, I can make conversation but phone is stuck on ringing mode, and after few moments hang up phone call, and I have missed call...
Somebody else have this problem? How can I fix this?
I dont have this problem.
pogano_celjade said:
When somebody calling me and I pick up, I can make conversation but phone is stuck on ringing mode, and after few moments hang up phone call, and I have missed call...
Somebody else have this problem? How can I fix this?
Click to expand...
Click to collapse
That's weird, I did never face this issue but my A2L is relatively new (1 week only).
I'll try to phone to my own A2L using different devices to see if I face this issue.
lbsilva said:
That's weird, I did never face this issue but my A2L is relatively new (1 week only).
I'll try to phone to my own A2L using different devices to see if I face this issue.
Click to expand...
Click to collapse
Yes, it is very weird and annoying. Not happens every time, but sometimes... ?
This happened to me yesterday for the first time, but I thought that was a problem of the person that was calling me.
It was a number I didn't have in my contacts, and after the bug I immediately called back that number, but it was not available.
I thought the person that was calling me had a very low battery charge and while calling me his phone turned off, causing the bug (because immediately after the bug it was unavailable).
To this date I still did not have this problem.
Me too, i cant answer and reject calls when i upgrade to android pie
Solved: Screen not turning on with incoming calls
Step 1: Go to Dialer or Phone app settings. To do so, you can either go to main settings, then open ‘Apps’, and then scroll down to Dialer or Phone App.
You can also access App Info page by long pressing the app icon, and then tapping the App info option or the small ‘i’ icon in the corner.
Step 2: Now select “App notifications” option and turn it "on"
Step 3: Now if App notifications are turned off, your display won’t wake up when someone calls you. Also if only the “Incoming calls” permission is off, your screen will not light up with incoming calls. Make sure required permissions are turned on and your issue will be fixed.
Xiaomi Mi 2 Lite. I cannot get incoming calls to show on my screen, so I can't answer. Tried switching notifications off and on again, tried forcing stop. Two days ago I did a factory reset and was OK for 2 days. I think this is since latest Android update about a 10 days ago.
Call answer bug
I have similar issue on Mi A1, been going for a while. Sometimes, call comes in, the answer key cannot pick and cannot reject the call. This happened after a certain update I just dont know which. I have noticed that this mostly happens at some particular GSM antennas, sometimes, just by moving away from that antenna (that's when in a car) solves the problem. But as long as I remained in that location at that time, i cannot pick or reject calls, I also can't make calls, I get the promt, network problem, even though the service bars r showing. And in some cases the people calling will tell me, that calls to me are not going through.
This is driving me nuts. When I get a phone call I get a bar at the top of the screen with two buttone, one saying Decline and the other sayng Answer. I can tap on it like a demented woodpecker, but nothing happens. If Itry to swipe it, the two buttons just disappear into a void and the phone keeps ringing with no way to answer. Very, very occasionally I get the normal notification that I can swipe to answer, but I have to phone nearly everybody back.
PeterSharpe said:
This is driving me nuts. When I get a phone call I get a bar at the top of the screen with two buttone, one saying Decline and the other sayng Answer. I can tap on it like a demented woodpecker, but nothing happens. If Itry to swipe it, the two buttons just disappear into a void and the phone keeps ringing with no way to answer. Very, very occasionally I get the normal notification that I can swipe to answer, but I have to phone nearly everybody back.
Click to expand...
Click to collapse
Clear data and cache of the "phone" App and if necessary reinstall the application