Related
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Astier said:
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Click to expand...
Click to collapse
check out your settings in active sync, ive had this problem a few times and when i change the settings to work in the config page of active sync, the problem goes away.
Found, thanks
On the PC in ActiveSync:
File/Connection settings/ This computer is connected to ... Internet !
Jean-Jacques
Could you have it set to Automatic?
I had the same issue, solved it with this post http://forum.xda-developers.com/showthread.php?t=321471
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly
If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...
Did any of these methods work? did you do something else to make it work??
This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?
yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'
Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K
lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K
start->settins->USD to PC-> Enable advanced network functionality
Oh, OK. I'd already done that! Keep coming in with suggestions though!
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Are you trying to say that your phone always connects to your computer as a USB device even if you select something different?
Sounds like it.
I've got a similar issue, my screen is dead so I can't select anything and it comes up as a disk drive. Kinda need to get it to active sync so I can back the phone up to restore to my new one.
Without being able to see or use the screen I can't, unless there is a keyboard method to choose activesync.
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
Click to expand...
Click to collapse
This is the proper behavior
siusky said:
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
Click to expand...
Click to collapse
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
cbeck said:
This is the proper behavior
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
Click to expand...
Click to collapse
Tried with the faster data box and without, mine starts active sync...which I want and need, it lasts for about one minute, then it disconnects and can no longer recognize the device unless I shut down the computer and do it again....but it just repeats this same things every time.
siusky said:
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Click to expand...
Click to collapse
Hello!
Please insert this into registry:
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="RNDIS"
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
"Order"=dword:0000000a
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
"ItemFlags"=dword:0000001f
"DeviceCompanion"=dword:00000000
"ShowTime"=dword:00000005
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
This should reset USB_To_PC to default settings and also ensure that you're running the proper driver.
Have a nice day,
Jackos
Just tried another cable...and it's working...idk why, but glad it's working again.
I have changed the keys of registry but i have the problem because ther is not some keys....
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
--> "DefaultClientDriver"="RNDIS" <----> (the value is Mass_Storage_Class) <--
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
--> "Order"=dword:0000000a <----> my value is 10(0X00000A) <--
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
--> "ItemFlags"=dword:0000001f <----> I have not this key <--
--> "DeviceCompanion"=dword:00000000 <----> I have not this key <--
--> "ShowTime"=dword:00000005 <----> I have not this key <--
I have --> "Option" = 1(0X00001)
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
Just create the keys.
I tried to make a cab from those reg entries but couldn't make it install successfully...
There might be typo ("Advance" instead of "Advanced" ?) or is the cab I made not good for my machine (TP2) ?
Could anyone make OR help me make a working cab installer (without confirmation please, my "touch" screen is broken and I need it to put the original rom back before sending my TP2 back) ?
Thanks a lot
Just to resume a lot of questions regarding this subject. There is a list of steps to get your 3G data connection shared with yout PC via USB for each device.
--== HTC HD7 ==--
1. Download XAP file
2. Download the HTC USB Modem drivers
3. Deploy XAP file to your phone
4. Turn off your Data connection in your phone.
5. Run DFRouter and click on “HTC Modem”
6. If you only downloaded driver package just unzip to any folder, then Open Device Manager (recommended for Win7 64bit).
7. Find USB\VID_0BB4&PID_0EFF&REV_0000&MI_01 and force update driver with HtcUsbMdmV64 (inside unzipped folder)
8. Find USB\VID_0BB4&PID_0EFF&REV_0000&MI_00 and force update driver with HtcVComV64 (inside unzipped folder)
9. You will get two new device HTC USB Modem and HTC Diagnostic Interface (COM8)
10. Connect device to PC, open HTC USB Modem and select Advance Label
11. Add below command +cgdcont=1,”ip”,”APN”
(APN = Your carrier’s APN)
12. Create a new connection with HTC USB Modem, diag number is *99# and disabling IPV6
13.Just connect without user name and password.
============================================================
--== Dell Venue Pro ==--
1. Download the HTC USB Modem drivers
2. Edit both HtcUsbMdmV64.inf and HtcVComV64.inf files from the extracted drivers replacing the HTC device IDs with VID_05c6&PID_3199. Leave the &MI_00.
3. Go to EM(##634#), and go to Service Center, swithcing to Composite Mode. The password is *#301#.
4. After the fone reboots, install the 2 modified device drivers as you would do in HTC tutorial.
4. Continue following the HTC guide from step 9.
============================================================
--== Samsung WP7 Devices ==--
1. Download Samsung USB Drivers and install it
2. Dial ##634# then press the Call button
3. On diagnosis screen, Dial *#7284# and press Call button
4. A “Microsoft USB Test” screen will show up which allows configuration of USB Path Control settings (options available is Zune Sync; Modem, Tethered Call; and Modem, USB Diag). Select Modem, Tethered Call. The phone will restart and activate the setting. Windows will detect and install the driver from the device. A phone modem named Samsung Mobile Modem will be installed.
5. Now you can create a connection dial-up on your windows as step 9 in HTC HD7 tutorial.
============================================================
--== LG WP7 Devices ==--
1. Download LG USB Drivers and install it
2.Launch the LG phone dialer, and dial ##634#, then press the Call button to bring up a list of applications under the screen title of “MFG”.
3.When asked to input password, enter 277634#*# to unlock the password-protected MFG.
4.Turn off the data connection in Settings -> Network Mobile.
5.Start MFG and go to the USB Switching option in Menu Engineer -> Port Setting.
6.Select the QC COMPOSITE and validate.
7.The phone will automatically restart to activate the setting.
8.Connect the phone to PC with a USB cable.
9.Windows should automatically detect the Windows Phone 7 and install driver from the device. A phone modem named LGE CDMA USB Modem will be installed.
10.Edit or configure the LGE CDMA USB Modem settings or properties, and add in additional parameter in the string (change APN for your APN name):
+CGDCONT=1,"IP","orange"
11.Manually create a new dial-up connection that uses the LG USB modem with phone number to dial as * 99 # as HTC HD7 tutorial.
============================================================
While tethering via USB, the synchronization with Zune software may not be working. In this case, just disconnect the USB cable and connect over Wi-Fi connection to sync up with Zune software. And the disclaimer is that the hack violates most mobile carrier’s terms of service, and may cost users a lot of money for overage charge if they’re on limited data plan.
Also, I didn't tested all devices cause I just have a HTC HD7 and all information here was a compilation from some blog bosts I found over the web. I hope moderators can stick it somewhere so people can stop creating new posts regarding this subject 'cause I'll keep this post updated and, when the WIFI/BT/Cableless tethering comes UP, I'll update it here.
I hape it help. Enjoy it.
Best regards...
Gutemberg
thanks this is great but we need internet connection sharing over usb, bt, or wifi
when our carriers can see us dialing up and charge us, well that is just not right
and i will not stand for it, nor will i pay for it lol
megagprime said:
thanks this is great but we need internet connection sharing over usb, bt, or wifi
when our carriers can see us dialing up and charge us, well that is just not right
and i will not stand for it, nor will i pay for it lol
Click to expand...
Click to collapse
Yep, I still working on figure out how to do this. If there is a way to open a socket on the phone and listen on some ports, I can quickly do that.
Also, you will only be billed from your carrier if you dont have a illimited data plan. At least, I'm not charged from nothing and run just fine.
Thanks a lot for compiling all this information and getting it to us. One question though. Do you have to update drivers on each pc you want to tether with? Also, think the link to the HTC USB Drivers is wrong
I've been following this thread for two days now (in the HD2 WP7 forum, http://forum.xda-developers.com/showthread.php?t=922000) but so far I'm not able to get my HD7 going with 3G tethering (always return error code of 692 despite me having to turn off the data connection in phone and having forced update the two drivers from HTC Sync for Android).
See if anyone else can get it going on HD7...
same here cannot download the second file...
kwill said:
Thanks a lot for compiling all this information and getting it to us. One question though. Do you have to update drivers on each pc you want to tether with? Also, think the link to the HTC USB Drivers is wrong
Click to expand...
Click to collapse
Yes, every PC that you are connecting the phone, you will need the USB driver. And sorry about the link. I already fixed it.
eeeeeh said:
I've been following this thread for two days now (in the HD2 WP7 forum, http://forum.xda-developers.com/showthread.php?t=922000) but so far I'm not able to get my HD7 going with 3G tethering (always return error code of 692 despite me having to turn off the data connection in phone and having forced update the two drivers from HTC Sync for Android).
See if anyone else can get it going on HD7...
Click to expand...
Click to collapse
Weird... I'm replying to you right now from my device connection...
galvesribeiro said:
Yes, every PC that you are connecting the phone, you will need the USB driver. And sorry about the link. I already fixed it.
Weird... I'm replying to you right now from my device connection...
Click to expand...
Click to collapse
In my modem log, I'm getting the following:
01-27-2011 13:44:30.317 - Opening Modem
01-27-2011 13:44:30.317 - 115200,8,N,1, ctsfl=0, rtsctl=1
01-27-2011 13:44:30.317 - Initializing modem.
01-27-2011 13:44:30.327 - DSR is low while initializing the modem. Verify modem is turned on.
01-27-2011 13:44:30.327 - CTS is low while initializing modem.
01-27-2011 13:44:30.337 - Send: AT<cr>
01-27-2011 13:44:32.350 - Timed out waiting for response from modem
01-27-2011 13:44:32.350 - The modem failed to respond to the initialization command, Retrying one more time
I've already put the extra initialization command into the modem advanced properties, under "Device Manager", and properties of the "HTC USB Modem"..
Maybe the format of my string is something wrong? I'm using this:
+cgdcont=1,"IP","mobile.three.com.hk"
eeeeeh said:
In my modem log, I'm getting the following:
01-27-2011 13:44:30.317 - Opening Modem
01-27-2011 13:44:30.317 - 115200,8,N,1, ctsfl=0, rtsctl=1
01-27-2011 13:44:30.317 - Initializing modem.
01-27-2011 13:44:30.327 - DSR is low while initializing the modem. Verify modem is turned on.
01-27-2011 13:44:30.327 - CTS is low while initializing modem.
01-27-2011 13:44:30.337 - Send: AT<cr>
01-27-2011 13:44:32.350 - Timed out waiting for response from modem
01-27-2011 13:44:32.350 - The modem failed to respond to the initialization command, Retrying one more time
I've already put the extra initialization command into the modem advanced properties, under "Device Manager", and properties of the "HTC USB Modem"..
Maybe the format of my string is something wrong? I'm using this:
+cgdcont=1,"IP","mobile.three.com.hk"
Click to expand...
Click to collapse
Okay, just to report back, it is now working properly. After some messing around - by not enabling (unchecking) the dial-up properties of IPV6 (so left with IPV4), connectivity went through flawlessly.
thanks everyone!
Awesome.
i have dialed up with my cell before (through windows on my htc diamond) and i was charged. telus sucks yes i know. i have not tried with my lg optimus but i bet they can see...
whats my telus APN name?
+cgdcont=1,"IP","telus" ???
ill test this and report back
The APN field is you APN name configured on your device. Not the APN Address.
In my case here in Brazil it is "TIM CONNECT FAST" so my command should be +cgdcont=1,"IP","TIM CONNECT FAST"
galvesribeiro said:
The APN field is you APN name configured on your device. Not the APN Address.
In my case here in Brazil it is "TIM CONNECT FAST" so my command should be +cgdcont=1,"IP","TIM CONNECT FAST"
Click to expand...
Click to collapse
sp.telus.com
=)... WORKS MINT!!!!
, will report if charged when telus updates my data usage/billing info
eeeeeh said:
Okay, just to report back, it is now working properly. After some messing around - by not enabling (unchecking) the dial-up properties of IPV6 (so left with IPV4), connectivity went through flawlessly.
thanks everyone!
Click to expand...
Click to collapse
Good! Let me update with this results
I'm stumped. Tried the APN address, the APN names, with data on/off, with APN in the cellular settings and without, IPV6 off etc. and nothing. Perhaps it's a T-Mobile US problem? Because I've tried the APN names "T-Mobile" and "T-Mobile US" and still get the 692 error...Any suggestions?
Ok. Now this is weird. I did nothing differently except I accidentally clicked USB Sync before I clicked HTC Modem on DFRouter and the connection went through. Hmm...
Success
Finally i got it working on my HTC-HD7 (Windows 7 x64 Prof).
The one thing a would like to add is I configured the "PPP" settings in the adapter settings (let ony LCP checked) but i don't think this was the breakthrough.
After some play-around in settings (PPP on pc for example, disable Wifi/Wlan on phone) I managed to get the Error "668" instead of "692", also data connection was disabled. Restarting the phone made it work!
Just make sure to have the right driver installed and restart your phone after disabling the data connection that helped for me!
Remember to disable IPv6.
I use the "*99#" number and +cgdcont=1,"ip","internet"
for o2 germany apn
Edit: Let the default COM port.. I didn't change the COM port and it works now.. If you changed then delete the devices from device manager and start from the beginning
good luck
reddragon
how is everyone dialing *99#? are you calling using your computer or your dialpad on WP7's?
t-mobile us settings hd7
alright after a lot of hours trying here and there i finally set up my connection from tmobile hd7 usa.
on the advance tab (to get there after installing the drivers and device on usb modem mode go to to device manager then modems then right click usb modem then properties then advance tab) put there copy and paste +cgdcont=1,"IP","wap.voicestream.com"
then go to settings on your phone, celullar, data connection off, go down add apn
apn
wap.voicestream.com
username
(blank)
password
(blank)
then
Add A New Internet Connection
Close the Phone and Modem Options and the Control Panel.
For XP: Create a new connection with Start -> Connect To -> Show all connections -> Create a new connection.
1. Click Next
2. Select "Connect To The Internet" then Next
3. Select "Set up my connection manually" then Next
4. Select "Connect using a dial-up modem" then Next.
For Vista: Create a new connection with Start -> Connect To ->
1. Set up a connection or network
2. Choose a connection option: Click on "Connect to the Internet (Set up a wireless, broadband, or dial-up connection to the Internet."
3. You are already connected to the Internet - Click on "Set up a new connection anyway"
4. At "How do you want to connect?" Click on "Dial-up"
5. Check only the Standard Modem (if prompted).
6. Give the connection a name such as "BlackBerry Modem", then Next.
7. On the next screen, pick one of the following phone numbers, depending on your carrier:
....If you use GSM/Cingular/AT&T/TMobile/SwissCom: Enter phone number *99#
8. Click Next.
If you use T-Mobile:
.........Username: (blank)
.........Password: (blank)
.........Note: In USA, you can leave both blank
9. click properties
ppp settings
ckeck only lcp extensions.
restart the phone at this point with usb disconnected then when the phone restarts connect usb
open your dial up connection and click connect.
hope this helps
thank u.
lemonspeakers said:
how is everyone dialing *99#? are you calling using your computer or your dialpad on WP7's?
Click to expand...
Click to collapse
You dial with your computer, where you set up the dial up connection.
Aditionaly for everyone with 32Bit Systems (like me...) who have troubles finding the drivers, take these from this post:
http://forum.xda-developers.com/showpost.php?p=10949837&postcount=78
It got it to work with my HTC Mozart 7 and german provider "BASE".
Now I'm curious how this is charged by the provider..... hope this is covered by my dataconnection flat.
C~
Hi people I have a small problem trying to tether my Desire HD.
I have rooted the handset and installed custom roms successfully. However,
When trying to USB tether I can connect it to my laptop (running XP) via USB tendering option on the phone. However I cannot connect to the internet on my laptop. Can anyone help ?? I have tried downloading USB tether tools or apps but no luck.
I have noticed that even though I have chosen USB tether if I go
Settings - wireless networks. And scroll down to the bottom,
The USB tether option is not ticked, trying to tick the box just brings up "unable to turn on"
I'm stumped as my friends Desire easily tethers on my laptop.
I am on Orange and have an " unlimited" data plan.
Thanks in advance people
Hmm that's weird.... try to unplug your dhd from your pc and activate usb tethering in the settings. Normally it should turn on even without being connected to a pc.
If there's still an error, it's probably an issue with your rom
Tapatalked with Tapatalk from my Desire HD using Tapatalk.
When I bought my DHD , I had the same problem , because I used to press either "Internet pass through" or "USB tethering" without waiting the phone to establish a stable connection to the PC .Later I realized that if I firstly turn on "Charge only" , because in this way the phone is able to establish a stable connection , and later I turn on "Internet pass through" or "Usb tethering" , the internet connection get established succesfully.So I suggest you to follow these instructions , I hope they could fix your issue :
-Press "Charge Only" when you have connected your phone to the PC . Wait a few seconds ( 10-15 ) , later you could press "usb tethering " .
-If this haven't helped you , you could try this
-Go to Control Panel - > Network Connections - > Press " Local Area Connection " icon ( which ressembles Monitors ) - > Press " Properties " - > Scroll down the column , which has appeared , till you found the row , in which is written " Internet Protocal TCP/IP" , and press it - > In both "general" and "alternate connection" press the circle , where is written " Obtain an IP adress , automatically " .
- After you have done this , try to establish USB tethering connection .
I hope this may fix your problem : ))
I've actually an even more strange behavouir....it looks connected (at least I've the icon in my tray area), but it is not working...
I've also tried to pass before from the charge only and then tick the USB tethering option, I've re-install the HTC sync and the sdk suite, I've done a factory reset....but nothing!!!
Any idea???
MArco
Does normal wifi tethering work?? Also are you on a custom rom or stock rom?
I had some problems with my Tethering, and although i allowed the connection to happen through my firewall, it still didnt work, so i fully disabled my firewall, then it worked.
It sometimes does do some weird things. but thats all explained @Feltwo''s Post above
Stock rom with the last update (2.3.3)...the wifi tethering doesn't work either...
Try a program I found/use it's called PdaNet. Check out the web site to see if it will work for you.
You're a genius!!
It works!!!
Thanks a lot, mate!