Sx66 Problem, Can You Help? - MDA III, XDA III, PDA2k, 9090 General

I changed the rom to w5 vanilla version and after a while the internet closes down by itself when launching it. Also pocket radio does the same. I give it a hard reset and all is well again. I have tried loading one app at a time but cannot find the culprit. I loaded SPB POCKET PLUS AN THE NEW SHELL APP which is pretty nice.
Any ideas?

What radio rom are you running? I don't have this problem myself

mr_ding said:
What radio rom are you running? I don't have this problem myself
Click to expand...
Click to collapse
Hey sorry for the late reply. I am running radio, 1.02.10 which I just read that it's very old? Is this why I am having these problems? Can I upgrade the radio without having to go back to 2003se? Thx

I upgraded the radio after my WM5 upgrade, so it should be doable.

Related

Cannot flash radio

Hi,
I'm on radio 1.14 T-Mobile MDA Pro.
I've flashed my radio from 1.10 to 1.13 then 1.14 over the last 6 months without any problems. 1.14 is not the best radio I've ever used and seems to be pretty poor with WM6. I'm trying to reflash with 1.13 but it's not having it. I've tried directly from the bootloader (1.01) screen but it still won't have it.
Could anyone help?
Thanks
what kind of error message appears in ma_noupgrade when u try to flash radio in bootloader mode?
Error message
Wow that was quick!
Thanks,
It's 114 Radio Rom Update Error (i've attached a screen grab). I'm using parallels to do the flashing - works on a rom as long as there is no radio.nbf to be flashed.
Thanks
sometimes it could happen. but you should be able to continue.
retry again two or more times.
if it stuck during flashing, retry again.
if it didn't work, try to uninstall activesync 4.5 and temporarily try to flash radio with 4.2 version.
activesync 4.5 in only necessary for WM6 synchronization.
you can use 4.2 while u are in bootloader mode, and try to flash radio.
Still no luck
I've tried everything without it working. Think it might be due to Parallels. I've reflashed the rom to 2.02.00 and it seems to have stopped the problems with the radio dropping out anyway.
Thanks for your help

mapking2007 loading problem finally solved!

Sorry to start a new thread but i just want to inform everybody. Mapking unable to load is because of the radio. Just flashed 1.34 and now mapking load. using black pro 2.0. flash radio 1.34 at wiki using autodetection mode. i am on latest hard spl. So faster flash your radio and finally mapking load. thanks for shogun, jj, lswv, xda-developers.com. My hermes finally rocks!
I got the same problem with mapking R10 and 2007! but now i use Radio 1.40 and i want not to downgrade to 1.34! any other solution? maybe we can modify the mapking.exe file ! thank!
Mapking 2007
I had radio 1.38 and it worked with Mapking 2007.
hmmm... let me try the radio too. thanks
testdebug said:
Sorry to start a new thread but i just want to inform everybody. Mapking unable to load is because of the radio. Just flashed 1.34 and now mapking load. using black pro 2.0. flash radio 1.34 at wiki using autodetection mode. i am on latest hard spl. So faster flash your radio and finally mapking load. thanks for shogun, jj, lswv, xda-developers.com. My hermes finally rocks!
Click to expand...
Click to collapse
Just like to feedback, i had the same problem.
Was on 1.43.00 radio and couldn't get Mapking 2007 or Mapking R12 to load. Only Mapking G10 worked. There's this popup with alot of boxes (i assume its a Chinese and appears as boxes) when you try to start.
I downgraded to 1.38.00 (Orange) and voila! It worked
I wonder how the radio would have affected Mapking but nevertheless, it's fixed for now.
I can't seem to get G10, G12 or 2007 working with Radios 1.38-1.43. Can anyone care to help? I am using Black Majic
Totally difference! I can use mapking on all roms i cooked since wm6 vanilla till black magic and radio 1.38-1.43. till now, it still works!
_______________
Black Majic
Radio v1.43.00.30
SuperCID
SPL 2.10.Ol
darn! i am not sure what's the problem at all. i tried to install mapking after a hard reset and it still does not seem to work
still can't seem to work with it. garmin que works fine. very very strange. only seems to work with 1.38 radio with older than black 2.0 WM6
any other tips to get it working? i keep getting back to "Programs" after the splash screen
I never have any problem with MK2007 with some of the rom I tested so far.
Please delete this double post. Connection was slow and ended up double posting. Sincere apology...
after extensive reading on xda-developers. i realised the mapking problem is due to sd card. they suggest format the sd card. But i already format. so this this time i fast format my sd card to Fat32 again then i slow format it again. now mapking successfully load. thanks everybody
testdebug said:
after extensive reading on xda-developers. i realised the mapking problem is due to sd card. they suggest format the sd card. But i already format. so this this time i fast format my sd card to Fat32 again then i slow format it again. now mapking successfully load. thanks everybody
Click to expand...
Click to collapse
thanks bro. i will try this tip.
Yeah! It's nothing to do with the radio versions. I'm successfully using Mapking 2007, Garmin Mobile XT and Franson GPSGate 2.5 inside Dopod WM6 official with Radio 1.47.
Bingo!!!!! The mapking2007 is works again on my HTC Diamond, Thanks a lot.
P.S. Don't use your desktop pc diskeeper to do defragment on your PPC. It would cause the above problem.
so strange, my Mapking2007 didn't let me switch the map.
hi there,can i know where can i download a full version of mapking?with malaysia sabah map,can some 1 just pm me if got the link?thanksin advance.......

Radio Problem (I Guess...)

hi guys....
When I received or made a phone call....it ended suddenly......no voice & I lost the '3G' or 'G' sign on the title bar.....
after the call ended....the sign back again.....
Do I have problem with my radio (1.46.00.11)??
Should I upgrade my Radio?
FYI...I am running karmba latest version (touch flo)
widigol said:
hi guys....
When I received or made a phone call....it ended suddenly......no voice & I lost the '3G' or 'G' sign on the title bar.....
after the call ended....the sign back again.....
Do I have problem with my radio (1.46.00.11)??
Should I upgrade my Radio?
FYI...I am running karmba latest version (touch flo)
Click to expand...
Click to collapse
Well, I have used that radio for a long time with several ROMs and did not encounter any problems at all. You might try reflashing the radio (as it does not involve any data loss) and if problem still persists try switching to another radio version or ROM.
My two cents ....
tnyynt said:
Well, I have used that radio for a long time with several ROMs and did not encounter any problems at all. You might try reflashing the radio (as it does not involve any data loss) and if problem still persists try switching to another radio version or ROM.
Click to expand...
Click to collapse
Based on my experience, the 1.46 radio ROM is extremely stable.
I did have problems with the karmba_a 6.2 ROM freezing on me, which has never happened with any other ROM before.
The freezing may be due to either the ROM itself or by a conflict with third-party applications, I wasn't able to identify which ....
I'd be inclined to try another ROM as my primary solution. If the problem persists, I'd reflash the 1.46 or look at another radio ROM, as tnyynt suggested.
Cheers!
hoja67

Help with epocrates

Alright, I'm out of ideas. I've been trying to install epocrates on my 8525 and I can't make any headway. I've tried Schap's WM6, CRC's release 9 as well as release 6 (which i guess some people have had success with). Tonight I even reinstalled the official att ROM and I still can't get anywhere. Every time I try to install it, it seems to install on the device ok, but during the initial sync I get an error of "device data buffer reset error."
I'm tapped out. Anyone have any ideas?
I have epocrates on my 8525 using vp3g's rom and I have not had any problems as you describe.
callar said:
I have epocrates on my 8525 using vp3g's rom and I have not had any problems as you describe.
Click to expand...
Click to collapse
Thanks! Playing around with vp3g's rom helped me figure out the problem!

spv m5000 upgraded to 6.1 and now no phone, help??

hi ive upgraded the rom on my orange spv to 6.1 20921 i believe, and since the os has run a lot better than the v5 that was on it, but the major downfall is that whenever i try to get the phone application up, nothing happens!, i cannot get the phone settings to even open up via wireless manager, and no error occurs just nothing happens, if anyone knows waht i need to do or any help would be appreciated
cheers
Welcome to forums
Have you tried a hard reset?
Have a look into the Wiki.
Good luck,
Hi, if hard reset doesn't work i suggest you to reflash your rom or another one and test.
Personnaly i got a problem, not the same, with phone, so i reflashed the rom and now everything is ok now.
i'd recommend you to flash you radio rom... not the os rom... check wiki for the radio only upgrade.... the problem is that the wm5 used old radio and some new wm6.1 requires new radio so i'll say flash your radio to 1.15 or 1.18 ...
Cheers
Rajiv

Categories

Resources