Hi,
I can conect to my home wi-fi ok and it gets an ip address. i can ping an address but after 30 seconds or so it stops working. it still thinks its connected but cant ping or navigate to any websites
any help greatly apreciated
Hi
I also have a similar problem
I have a 802.11b broadband router (linksys) which works fine with my two wifi PC's and my Wifi XDA Exec to access the Internet and collect e-mail
I just got an XDA Orbit and although it "sees" and connects to the Broadband router it will NOT allow access to the internet or e-mail (apart from one very short half page of ntlworld.com home page on one occasion)
WORST than that - it HANGS the wi-fi router and I have to reset it before I can access the Internet from any other PC's !!
What am I doing WRONG ???
Any suggestions welcomed
just noticed there is another post about this problem
Take a look Here. This worked for me
I originally had trouble connecting to the internet. I connected to my router and added a device registering my Orbit MAC address and the other info required and bingo works a treat. I checked the other link from jamin100, personally didnt have to do this!!
SOLUTION!
Hi @ll..
i had the same Problem..
I connect per WLAN to my accesspoint, then i can open Websites with any Browser.. but after about 30seconds it seems, that the connection is down.
Here i have a solution, that works great at my XDA Orbit
Goto Settings->Connections
Change the Power-Settings of WLAN to Power optimized--> MAX
then the Problem should be solved ;-)
GREAT
This fixed it
Why ???
I should not need extra power - I am 3 feet from the WiFi router ??
XDA Orbit now get hot after 20 mins use onWiFi !!
Hi,
I Am Able To Connect And Browse The Internet At Home Perfectly well However When I Am at University I Try To Connect To The Wifi. It Will Connect but After A Bit It Will Not Load Up Any Pages although It Still Shows I Am Connected! Furthermore my Mate who Has A Mini S And P990i Is Able To Connect And Browse Perfectly.
Another Thing Is That When I Try To Search For Networks It Will Not Show Anything But When I Restart The Orbit It Will Show The Available Wifi!
Finaly I Cant Stop That "Message Sent" Notification, I Have Tried To Do All The Tweaks But Nothing Works
Any Help Will Be Much Appreciated
@eddieorz:
it´s the same at my orbit. it get very hot after some time "online" ;-)
i hope, this will be fixed at the new Update in summer 2007 (WM6)
I know I know, me digging in some old threads.....
Somebody has the solution already???
Thanks again.
Related
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
It is a PC connection problem
Try to enable PC internet sharing
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
Chek the settings your wi-fi card connect to Internet or to Workplace
....
Thanks for all the advise but my problem still not resolved yet.... not too sure whether is my home WIFI+router setting or my P800W setting problem.... this really getting to my nerve !!!
1. I can connect to my home WIFI and able to surf internet with my laptop.
2. I can connect to my home WIFI and able to surf internet with my old pda MITAC 558.
3. When i use my p800w... can connect to my home WIFI but cannot surf the internet. The weird part... managed to surf the internet few times... and then cannot surf again/..
Please help !!
I'm facing same problem also..
I can connect to Wifi, but when try to open website, using IE
is stuck on LOCATING....
WiFi Issues
I have exactly the same issues and have tried installing both Opera and Netfront to no avail. I can connect to Wifi perfectly can then sync Avantgo, download quick GPS updates and surf a couple of pages, then the DNS seems to fail, have tried with DHCP and fixed IP's. Think the o2 Orbit has some sort of DNS cache fault...As a side issue when the Orbit does connect it runs the Internet very slowly...Both a XDA IIi and XDAs run perfectly on the same wireless!!
Get the devices early and wait for the fixes!!
the same thing on Artemis - device gets IP from WiFi Access point by DHCP, but without DNS. I set DNS manually and Internet is working thought WiFi now.
I had the same problem then installed Wi-Fi Companion, issue resolved. You can download a trial for three days from Pocketgear or Handango.
I changed the wireless mode of the router to only wifi g
has anyone any idea how to get round this yet?
Tried to connect today and all that happens is ie sits there saying 'locating'
I tried Wifi companion..it shows me connected and everything but still can't surf the net.
how can I set DNS manually? might be worth a try
thanks for any help
quick update...Ive just been doig a tracert and ping of my service provider and although the trace and ping come out ok...i.e. still just sits there saying locating...
anyone any ideas?? getting desperate here
Apologies..another quick update....
it's not that I can't connect to the net..it's that there is a default page on IE that tries to connect to pda.o2.co.uk or something..and this page is either not there or something...so, changed the default page and I'm good to go...
apologies again
Mine did the same ... Heres the fix ... It has trouble locating the home page . Type in manually to the address line the url for say GOOGLE and wait for it to connect . Then go to tools options and save current page ( Google) as home page and hey presto ! Sorted
Hi
I also have a similar problem
I have a 802.11b broadband router (linksys) which works fine with my two wifi PC's and my Wifi XDA Exec to access the Internet and collect e-mail
I just got an XDA Orbit and although it "sees" and connects to the Broadband router it will NOT allow access to the internet or e-mail (apart from one very short half page of ntlworld.com home page on one occasion)
WORST than that , when I use the XDA Orbit with Wifi and Internet Explorer - it HANGS the wi-fi router after about 30 secs and I have to reset it before I can access the Internet from any other PC's !!
What am I doing WRONG ???
Any suggestions welcomed
I tried the above 'fixes' and it DID get me a BIT further
i.e. I was able to get a connection to google.co.uk for about 30 seconds and do one enquiry - but then it STILL hung the router and the XDA Orbit was stuck saying 'locating'
Take a look here this worked for me.
Sorry did not work for me - after 30-40 seconds of surfing IE hangs on 'locating' and the router hangs and has to be re-set
ANYTHING TO DO WITH 802.11b compatibility ????????
Where can I get Opera browser to try that ?
How many posters have fixed this problem ?
OK
I downloaded the latest trial version of OPERA and tested that
EXACTLY the same result
If I switch on WiFi and connect to the Internet via Opera, I can access the internet for about 30 seconds, then the browser cannot access any more
If I switch of WiFi on the Orbit quickly, then the Router is OK - if I don't, then the Router Hangs and all my computers lose internet access
Has anyone else seen this ??
Has anyone cured this ??
Is is an 802.11b problem ??
I cant seem to get WIFI working on my xda orbit. I can get the wifi to connect to my wireless router fine, It gets a IP address but when i open up PIE it gets stuck on locating and then says it cant find the webpage.
I have WEP security setup on my router and i know that its not that because i can access the web fine from my Dell Axim X50v. Does anyone have any ideas?
jamin100 said:
I cant seem to get WIFI working on my xda orbit. I can get the wifi to connect to my wireless router fine, It gets a IP address but when i open up PIE it gets stuck on locating and then says it cant find the webpage.
I have WEP security setup on my router and i know that its not that because i can access the web fine from my Dell Axim X50v. Does anyone have any ideas?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=1116198&postcount=9
well come to all
hi bros i am new in this forum and i am a ordinary unlockers of mobile...i dont know any thing in this forum...so plz any tell me how to unlock pda ,xda etc and which software have to use for unlock them
Thanks have tried your suggestions but to no avail.
I can connect to all the shared drives on my network via my orbit just not the internet? I dont have a proxy set up just a direct connection to the internet.
I've hard reset my orbit and the problem still exists. Please Help!
Hi,
I've just set my XDA Orbit up in the last 5 minutes on WiFi through a secured Netgear Router. I get an IPaddress, and then recieve the same message. PIE is looking for a PDA web page. I just typed in www.google.com using the keyboard and it works fine. I've now made ths my home page. PIE works great.
Hope this helps
UPO.
Using an O2 XDA Orbit - flashed with the WM6 ROM posted in the other sub-forum.
Although it's configured for GPRS and this works ok (push-email, web browsing etc) it seems to 'lose' the connection on a daily basis requiring a soft-reset in order to bring it back.
No programs stop working, still get the big G symbol, but if I say launch Internet Explorer to try & restart GPRS it just sits there saying connecting ....
My guess is something needs to be 'tweaked' to ensure that I don't lose the connection ... any ideas ?
Cheers
Mark