Related
Any ideas? Reg Hack?
I already have a program to manually do it, but you have do a soft reset afterwards. I would prefer not to have them all together.
Thanks!
The list is stored at
HKCU\Software\Microsft\Shell\TaskSwitch
You can manually delete them from here, but soft reset required.
DOn't know how to turn it off though.
Thanks. I am currently playing around with the current PDA2K rom, so I'll delete the key itself and see if it throws any errors. If it blows up, I'll just do a hard reset.
Thanks again!
just curious
so did u have to hard reset , or just deleting the reg key worked
The damm thing is self reparing. If you delete the contents and then launch a program, it fixes itself. Same thing if you delete the key itself...if you open up a new porgram, it recreates the key and all of the contents.
Need to find out what does it and figure out how to stop. You would think that having this option to turn off recent docs has been in Windows for so long that you could have the right to say no on the PPC.
Is there some way to excise Internet Explorer from my Blue Angel? I don't like IE, never did, never use it, and use XPlite to remove it from WinXP as well. And is it so tightly integrated with the operating system that if it were to be removed I'd have a hard time getting other programs to run? Thanks.
it is into rom, if you made custom rom and remove ie files this is the only way, you can always delete ie shortcuts from \windows\start menu. There is no software like nlite for windows mobile
Thanks, xplode. I'll have to try that sometime. When I do, I'll come back to this thread and report my success/failure.
This is an update on my previous topic:corrupt installations of programs.
(see below)
I also can't use the internet anymore, either way via connection with active sync by usb cable or wireless with WiFi mode. It does however states that a connection has been made, but when starting up Internet Explorer i don't get for example googles homepage.
When insterted in my desktop, active sync also replies it cannot sync properly. And i get a warning on the p3300 screen saying: could not get an ip adress or something like it.
See below the problem of my first topic:
Hi,
Could anybody provide help for me? My P3300 doesn't seem to be able to install any programs / games anymore?!? What to do, has anybody had the same experience?
Once I install a program from my desktop PC to the P3300 or when I copy the CAB-file straight to the P3300, I get the standard installation screen: "choose a location.....Device, Storage Card or Bluetooth...blablabla"
But when I tap either one, let's say Storage Card, the thing is loading and a 2 seconds later I get the same screen, but with the message: "pocketxpdf.sf.net pocketxpdf cannot be installed. To try installing again to a different location, choose a location: Device, Storagecard or Bluetooth."
How is this possible all of a sudden? Never had problems...there is enough storage space, I've never updated the ROM, just a soft-reset doesn't work either. I don't want to do a hard-reset yet until I know a way to export my Contacts so I don't have to bring them in manually again after a possible hard-reset. (since i cannot install the program EasyHelper anymore...)
Anyone have any clue, what could be wrong?
My Specs:
HTC P3300 UK (+ extended battery)
Original ROM version
WM5
Installed programs:
Windows Vista Skin
Battery Status
Pocket Mechanic
SBSH Clock
Resco Explorer
PSshutXP
Pocket Painter
Wisbar Advantage 2
TomTom WE full
Games:
Battleship
Chess
Worms
Many thanks if you could help me out!
Greetz
Pallemans
FIXED!!!!
I fixed it!
I have no idea how, but I can install programs again. And I can connect via wLan (WiFi) and use the internet again.
What I did was: I used Sprite Backup Software for PPC on my laptop which I used a couple months ago to make a backup. I restored this backup to the phone. After, everything worked again and I could install PocketXPDF 0.5.0 finally with success.
Only side-affect: I lost recent made contacts and recently made/received SMS text messages. I think Sprite also overwrote these files with the older ones I had still on my laptop.
So,people, you see: It's always usefull to have a backup of your devices!
I am not responsible for any damage that may be caused before, during or after the flash. It’s entirely at your own risk.
Thanks first of all to Shokka9 for all the help during cooking and for a flawless M2D package. Also to Blazingwolf for NeoTitanium which is how titanium should have looked.
Big thanks to Bga7x for all the help with sys + FloTanium.
Startup animation courtesy of Airreak (Thanks!!)
SYS/XIP 23053. It’s got both NeoTitanium and M2D cooked in along with a lot of default Samsung program + all the usual additions. Additionally it benefits from TFDetacher which means you can switch between Titanium and Manilla instantly and XDA_UC... More about this later.. It's alot going on at first startup, so please be patient, once set up it runs like lightning.
To change ringtone, navigate to the file with file explorer and tap and hold, select set as ringtone in the popup menu. There is also a problem with most themes, but the WM7 theme attached is working according to Waikiki.. Also there's a taskmanager attached which Close programs with the x-button (ported to omnia thanks to Blazingwolf!!)
If you are having connection problems, try changing to a differenet provider to you, wait 30 sec, then change back to your own.. Then your sms/mms/internet settings will be automatically configured. Also go settings\connnecttions\browser connections and tick Automatically detect settings..
Changes in 23053:
- Top bar works in M2D
- Icons are full size again in M2D Favourites tab
- Kept some WM6.5 widgets
- Added Notepad (thanks Bgill55)
- Removed Office.Works better when installed as cab in my storage + you get the file associations tongue.gif . Just drop into XDA_UC\SD
- Added Midomi (thanks to Sector)
Kept/Added:
Removed Voice command
Themes now work
.net 3.5 + flash 3.1
Advanced config Tool
Black Russian Skins
Bluetooth Icon
Chobit Smart Lock
Clear Temp Disabled
Error Reporting, Dialer Skin, Security (Doesn’t warn on unsigned cabs).
Disabled Screen Calibration at startup (Thanks to Shokka9)
EverApp (to stop programs Auto Close)
Favourite Settings
Finger Keyboard
FM Radio
Google Maps 3.2 Layers
HTC Task Manager
HTC Emupanel (updated and working in new builds thanks to speleomaniac)
Internet Sharing
M2DC + M2D app Launcher
Mortscript 4.2
NEO Titanium (Thanks to Blazingwolf)
No Data
Office (removed One note)
PIM Backup
psShutXP (NuclearEMP skin)
Remote Desktop
SD Tuneup
Shake and Save
Smart Converter
Smart Reader
Solitaire
Task switcher (swipe finger from bottom of screen to the top)
TFDetacher
Toggle Bluetooth
Torch Button
TV Out
Windows Live
XDA_UC (Automatically install all your apps/reg tweaks etc)
That’s it I think. Seems a lot but I’ve done a lot of work on the sys and it’s still a very fast ROM (Freed up space in right places).
Before flashing this rom:
Make sure you have a XDA_UC folder created on the storage card with a SD folder inside it. Drop in here the apps you want be installed automatically. I recommend you put Touchresponse in here and the Registry tweak cab attached (saves a lot of typing).
After flash:
When you get to the first “tap screen to setup device”, wait for it to restart automatically (around 15-30sec). You might get errors at first startup (mainly ATplugin errors). If you do, hard reset. I get these errors once every 10 flashes, dunno why but a hard reset solves it. It's a lot going on / being installed just after flash, especially all the titanium plugins. You WILL get a TFDetacher /Manilla error, just ignore this.
TFDetacher instructions:
1. After Flash there is no need to enable Touchflo(but you will get an error message, just ignore it). scroll to TFDetacher folder, then TFDConfig. It will open up tab over to config on the bottom.
2. the first thing you will do now in the config screen is change the TouchFlo Mode. It must say "TouchFlo 2D" k that part is done.
3. Now uncheck "launch TouchFlo on start up". Check "After Launch, Hide then Show"
4. press the "change Today Left Soft Key" hit the "quick Assignments..." Arrow and press "show TouchFlo" the Text should now read TouchFlo
5. Go back to your today screen and your left soft key should now say TouchFlo you can hit that to luanch TouchFlo.
6. Go back into config and do the same for the the TouchFlo Left soft key you will want to change it to "hide TouchFlo" the text should say "today". Exit.
Thats it!! You can now change between TouchFlo and titanium at the touch of a button!!
You will get a TFDetacher error at startup, saying that manilla.exe has not been found. Ignore this and follow instructions to setup..
Thanks to Ozra, you can now do the reg-entries with a simple cab (attached).. Just drop into XDA_UC folder and it happens automatically on installation.
If you go in to map the right soft-key in M2DC the left sometimes revert back to contacts. Just go back to TFDConfig and change the right soft-key back to Today.
XDA UC (auto installation of progs/reg entries etc. etc.)
Included in this ROM is XDA UC, which is a brilliant way of installing all your usual cabs after a flash using mort script. The process is fully automatic and requires no user intervention (unless you want to install onto My storage/ Storage card). It will commence a few seconds after starting up and MUST NOT BE INTERRUPTED.Readmore about it HERE.
This is how to do it:
1. Create a XDA_UC folder on the root of your storage card. In this folder, copy all the cabs you want to have installed onto the main memory.
2. In the XDA_UC folder, create a folder called SD. In this folder, place all the cabs that want to install onto Storage card/ My Storage. You will have get the option where to install them. Please note, if you install a cab that needs restarting after install (e.g Office), DO NOT restart, wait til everything’s installed and then restart manually (You will get a message when it’s all done) That’s it!! Please read the original thread over at xda-developers as it explain this in a lot more detail. You can also restore registry tweaks, themes etc. Etc.
Download from Mediafire
Sharebee Mirror
Flotanium with LZX Compression (Mediafire)
Download from http://www.mediafire.com/?xnmvym1tntk
Howo do u open the file to copy the cabs over to the storage card?
Can the wifi works on this rom?? seems interesting
cjx75 said:
Can the wifi works on this rom?? seems interesting
Click to expand...
Click to collapse
Yes Wifi works fine in this ROM.
sanjeevknk said:
I am not responsible for any damage that may be caused before, during or after the flash. It’s entirely at your own risk.
Thanks first of all to Shokka9 for all the help during cooking and for a flawless M2D package. Also to Blazingwolf for NeoTitanium which is how titanium should have looked.
Big thanks to Bga7x for all the help with sys + FloTanium.
Startup animation courtesy of Airreak (Thanks!!)
SYS/XIP 23053. It’s got both NeoTitanium and M2D cooked in along with a lot of default Samsung program + all the usual additions. Additionally it benefits from TFDetacher which means you can switch between Titanium and Manilla instantly and XDA_UC... More about this later.. It's alot going on at first startup, so please be patient, once set up it runs like lightning.
To change ringtone, navigate to the file with file explorer and tap and hold, select set as ringtone in the popup menu. There is also a problem with most themes, but the WM7 theme attached is working according to Waikiki.. Also there's a taskmanager attached which Close programs with the x-button (ported to omnia thanks to Blazingwolf!!)
If you are having connection problems, try changing to a differenet provider to you, wait 30 sec, then change back to your own.. Then your sms/mms/internet settings will be automatically configured. Also go settings\connnecttions\browser connections and tick Automatically detect settings..
Changes in 23053:
- Top bar works in M2D
- Icons are full size again in M2D Favourites tab
- Kept some WM6.5 widgets
- Added Notepad (thanks Bgill55)
- Removed Office.Works better when installed as cab in my storage + you get the file associations tongue.gif . Just drop into XDA_UC\SD
- Added Midomi (thanks to Sector)
Kept/Added:
Removed Voice command
Themes now work
.net 3.5 + flash 3.1
Advanced config Tool
Black Russian Skins
Bluetooth Icon
Chobit Smart Lock
Clear Temp Disabled
Error Reporting, Dialer Skin, Security (Doesn’t warn on unsigned cabs).
Disabled Screen Calibration at startup (Thanks to Shokka9)
EverApp (to stop programs Auto Close)
Favourite Settings
Finger Keyboard
FM Radio
Google Maps 3.2 Layers
HTC Task Manager
HTC Emupanel (updated and working in new builds thanks to speleomaniac)
Internet Sharing
M2DC + M2D app Launcher
Mortscript 4.2
NEO Titanium (Thanks to Blazingwolf)
No Data
Office (removed One note)
PIM Backup
psShutXP (NuclearEMP skin)
Remote Desktop
SD Tuneup
Shake and Save
Smart Converter
Smart Reader
Solitaire
Task switcher (swipe finger from bottom of screen to the top)
TFDetacher
Toggle Bluetooth
Torch Button
TV Out
Windows Live
XDA_UC (Automatically install all your apps/reg tweaks etc)
That’s it I think. Seems a lot but I’ve done a lot of work on the sys and it’s still a very fast ROM (Freed up space in right places).
Before flashing this rom:
Make sure you have a XDA_UC folder created on the storage card with a SD folder inside it. Drop in here the apps you want be installed automatically. I recommend you put Touchresponse in here and the Registry tweak cab attached (saves a lot of typing).
After flash:
When you get to the first “tap screen to setup device”, wait for it to restart automatically (around 15-30sec). You might get errors at first startup (mainly ATplugin errors). If you do, hard reset. I get these errors once every 10 flashes, dunno why but a hard reset solves it. It's a lot going on / being installed just after flash, especially all the titanium plugins. You WILL get a TFDetacher /Manilla error, just ignore this.
TFDetacher instructions:
1. After Flash there is no need to enable Touchflo(but you will get an error message, just ignore it). scroll to TFDetacher folder, then TFDConfig. It will open up tab over to config on the bottom.
2. the first thing you will do now in the config screen is change the TouchFlo Mode. It must say "TouchFlo 2D" k that part is done.
3. Now uncheck "launch TouchFlo on start up". Check "After Launch, Hide then Show"
4. press the "change Today Left Soft Key" hit the "quick Assignments..." Arrow and press "show TouchFlo" the Text should now read TouchFlo
5. Go back to your today screen and your left soft key should now say TouchFlo you can hit that to luanch TouchFlo.
6. Go back into config and do the same for the the TouchFlo Left soft key you will want to change it to "hide TouchFlo" the text should say "today". Exit.
Thats it!! You can now change between TouchFlo and titanium at the touch of a button!!
You will get a TFDetacher error at startup, saying that manilla.exe has not been found. Ignore this and follow instructions to setup..
Thanks to Ozra, you can now do the reg-entries with a simple cab (attached).. Just drop into XDA_UC folder and it happens automatically on installation.
If you go in to map the right soft-key in M2DC the left sometimes revert back to contacts. Just go back to TFDConfig and change the right soft-key back to Today.
XDA UC (auto installation of progs/reg entries etc. etc.)
Included in this ROM is XDA UC, which is a brilliant way of installing all your usual cabs after a flash using mort script. The process is fully automatic and requires no user intervention (unless you want to install onto My storage/ Storage card). It will commence a few seconds after starting up and MUST NOT BE INTERRUPTED.Readmore about it HERE.
This is how to do it:
1. Create a XDA_UC folder on the root of your storage card. In this folder, copy all the cabs you want to have installed onto the main memory.
2. In the XDA_UC folder, create a folder called SD. In this folder, place all the cabs that want to install onto Storage card/ My Storage. You will have get the option where to install them. Please note, if you install a cab that needs restarting after install (e.g Office), DO NOT restart, wait til everything’s installed and then restart manually (You will get a message when it’s all done) That’s it!! Please read the original thread over at xda-developers as it explain this in a lot more detail. You can also restore registry tweaks, themes etc. Etc.
Download from Mediafire
Sharebee Mirror
Flotanium with LZX Compression (Mediafire)
Download from http://www.mediafire.com/?xnmvym1tntk
Click to expand...
Click to collapse
thanks man, works very nice..
ok, i'm a complete beginner, so i have to ask: does this mean that my wm 6.1 will be updated to 6.5?
I have read a lot of threads about the Touch Pro 2, but there are few that are meant for the AT&T version. Maybe we create a thread specifically for the AT&T version?
First off to flash your devide you need Hard-SPL. Thanks to the Olipro team!
Thanks to Scrog for the Enablerapinew for flashing Hard SPL easily, and Dot Task manager for editing. Unfortunately a 100% keyboard fix isnt here yet, from what I have seen, but people are working on it. Make sure to read the first few pages of this thread for issues and CABs on the keyboard:
http://forum.xda-developers.com/showthread.php?t=569651&page=3
Tilt2 Keyboard fix CAB. Only thing that doesnt work is the "ok" button.
http://forum.xda-developers.com/showpost.php?p=4713623&postcount=27
Thanks to Eras2r for the Dumped Stock Tilt 2 Rom found here:
http://forum.xda-developers.com/showthread.php?t=574923
I know there was a keyboard CAB released for anyone flashing a different ROM. I will compile a few CABS and such to help out my fellow AT&T peoples.
Here is a link to a Keyboard re-map program that will allow you to change any key to do whatever you wish.
http://forum.xda-developers.com/showthread.php?t=554240
Anyone else feel free to add stuff that works. I wanted to add Advanced Config, but it requires NET CF 3.5 found here: http://www.megaupload.com/?d=2ZGV1DNJ
Here is how to add new cities to the weather tab database. I take no credit for this as its copied from other available threads, but I thought I'd add it here since this was SUCH A PAIN IN MY ARSE to get working on the Tilt2.
Step 1) Download Total Commander or Resco File Explorer
Step 2) Go the Windows directory and copy the file called "2330fc3c_manila" to your SD card.
Step 3) In your SD card, find the 2330fc3c_manila file, and change its properties so that 'read-only' is UNCHECKED
Step 4) Copy 2330fc3c_manila back to you Windows directory
Step 5) Download the Weather Database Editor (WDE) cab (Version 1.20) and install onto your Tilt2
http://forum.xda-developers.com/atta...0&d=1223638121
Step 6) Soft reset
Step 7) You can now use WDE to add cities!
Format for US is:
NAM|US|YOUR STATE|YOUR CITY
All thanks go to Hamz22 and jamie and combat goofwing
How to get YouTube to work:
-The Youtube program is already installed, AT&T didnt link the exe.
Go to file explorer under the Windows folder, and scroll down to the 433kb YouTube file. Copy that and past it into your Windows -> Start Menu -> Programs or Apps or where ever you want the icon to be folder.
*Make sure you then go to Start -> Tools -> Proxy Manager -> Disable Proxy.
Here is a thread on how to get Tethering to work: http://forum.xda-developers.com/showthread.php?t=569953
Below is the cab for the AT&T hotspot location software. Kinda nice to install after flashing a non-ATT ROM. -thanks to Motocrossmann
Stock ROM for waranty purposes(thanks Herg!)
http://mobilitydigest.com/forums/showthread.php?t=2113
Thanks to these talented Chef's for AT&T Specific ROM's below. This will give us a good variety to start with:
Chef Arrup's ROM thread:
http://forum.xda-developers.com/showthread.php?t=576957
NATF's no Bloat stock AT&T version:
http://forum.xda-developers.com/showthread.php?t=570631&highlight=NATF
Thanks to At0m for the first Tilt2 specific beta ROM found here:
http://forum.xda-developers.com/showthread.php?t=568233
I am glad you posted that because I could not get Adv Config 3.3 to install.
Where do I place that NETCF35
edit: nevermind. I see that netcf35 is a cab. all good
Forgive me.....
Enablerapinew? Never heard of this, what does it do?
Freezing Problems
Is anyone else having freezing problems on their Tilt 2. Mine seems to freeze all the time.
Here are the apps I have installed in case one of them is creating the problem:
Microsoft My Phone
Microsoft .NET CF 3.5
Izaxo_SkiersApp
RESET_VegasPoolS
TheAs_ApMobile
Weath_WeatherBug
SlingPlayer Mobile
Microsoft Voice Command
Microsoft TagReader
Barguast Groovefish
Microsoft Windows(r) Marketplace
Also, Total Commander refuses to install on my Tilt 2
Just wondering if it is my Tilt 2, or if this is a common problem. By the way, I am still using the stock ROM
Thanks
I have error reporting enabled on my phone. I get an error saying some program rc.exe crashed. I have no clue what this program is, but it crashes 12 times a day. Maybe you have this program on your phone.
All the cabs in the following two posts work on my tilt 2 cooked with the AZTOR ROM:
http://forum.xda-developers.com/showpost.php?p=4740115&postcount=94
http://forum.xda-developers.com/showpost.php?p=4740269&postcount=95
Includes no curtains, background for all tabs, and some others.
Also freezing
My tilt 2 freezes about 5x a day. I just took a look at it and the time says 2am. its 4:52 here!!!!
it freezes when i go into landscape mode. It freezes if i x out of a program quickly and scroll on touch flo. It pretty much freezes if i do a few things at a time.
the only program i have installed is palringo and i know it freezed before i even had it.
Any suggestions? Stock att tilt 2 ROM here.
My T2 runs std ATT ROM and I have put a number of cabs into it. It does NOT freeze up. BUT, there is an issue with TF3D.
SPB MS3.5
SPB Wallet
SPB Weather
SPB Backup
NetCF3.5
Adv. Config
Snooze Fix cab/hack -- oversleep protection
Google Maps
Reg Edit
1% Battery cab/hack -- OCD fix
DisablePopUpKeyboard cab -- stops the insanity
key re-mapper cabs/app --- killer app
However, I turned TF3D OFF before I installed MS 3.5. because I wondered whether they would conflict. Sure enough, I can not get TF3D to come back to life. Not sure whether there is a conflict or not. Thought of perusing the SPB Forum and will likely do that later. EDIT: can not run two shells at the same time...TF3D and MS3.5. Can jump back and forth or pick and choose.
I have not really explored some of the stock programs and crap yet
Un-neccessary processes running!!
I deleted a bunch of stuff from the \windows\startup folder, but still have some processes running that I would like to kill but can't seem to find a reg entry or startup link anywhere. (I know, this seems like it could be a thread of its own!)
I have already removed the following with no noticeable difference:
BTTrayCE.lnk
DelWMPTempFolder.lnk
HTCStartUp.lnk
PKG.lnkpoutlook.lnk
MessageCSPtool.lnk
These processes still show up (using MemMaid) and don't seem to be needed for anything I do. Can someone weigh in on these?
1. Opera9.exe; How to stop from loading?
Are the following needed? If not, how to stop them from loading?
2. CommManager.exe
3. QuickGPS.exe
4. HTCIMSSvc.exe
5. RegistryCSPTool.exe
Thanks
MardiG said:
Is anyone else having freezing problems on their Tilt 2. Mine seems to freeze all the time.
Here are the apps I have installed in case one of them is creating the problem:
Microsoft My Phone
Microsoft .NET CF 3.5
Izaxo_SkiersApp
RESET_VegasPoolS
TheAs_ApMobile
Weath_WeatherBug
SlingPlayer Mobile
Microsoft Voice Command
Microsoft TagReader
Barguast Groovefish
Microsoft Windows(r) Marketplace
Also, Total Commander refuses to install on my Tilt 2
Just wondering if it is my Tilt 2, or if this is a common problem. By the way, I am still using the stock ROM
Thanks
Click to expand...
Click to collapse
I got at least twice as many apps running and no freezing. Just a data point for you . . . .
IE as default browser
Does anyone know how to set IE as the default browser? I have the AT&T Tilt 2, WM6.5 factory ROM. I have a program that is not compatible w/ the Opera browser, and I think I like the ability to switch between the 2 variants (modes) (desktop & mobile) of the IE browser.
Thanks,
Dave
Here is how to add new cities to the weather tab database. I take no credit for this as its copied from other available threads, but I thought I'd add it here since this was SUCH A PAIN IN MY ARSE to get working on the Tilt2.
Step 1) Download Total Commander or Resco File Explorer
Step 2) Go the Windows directory and copy the file called "2330fc3c_manila" to your SD card.
Step 3) In your SD card, find the 2330fc3c_manila file, and change its properties so that 'read-only' is UNCHECKED
Step 4) Copy 2330fc3c_manila back to you Windows directory
Step 5) Download the Weather Database Editor (WDE) cab (Version 1.20) and install onto your Tilt2
http://forum.xda-developers.com/atta...0&d=1223638121
Step 6) Soft reset
Step 7) You can now use WDE to add cities!
Format for US is:
NAM|US|YOUR STATE|YOUR CITY
All thanks go to Hamz22 and jamie and combat goofwing
Here is the cab for the AT&T hotspot location software. Kinda nice to install after flashing a non-ATT ROM.
XATAGuy said:
Does anyone know how to set IE as the default browser? I have the AT&T Tilt 2, WM6.5 factory ROM. I have a program that is not compatible w/ the Opera browser, and I think I like the ability to switch between the 2 variants (modes) (desktop & mobile) of the IE browser.
Thanks,
Dave
Click to expand...
Click to collapse
Dave, you need to install a program called Darkness 231 Opera default (something like that). I'll try to upload it later, but I'm about to head out to the football game.
Does anyone have a cab for Window Live Messenger only. I don't want to use all the Windows Live stuff, just the Messenger and it's not pre-installed on the Tilt2.
Remap PTT?
anyone have a remap cab for PTT? i'm running an energy Rom so there's no PTT remap option. If no cab, has anyone tried the old fuze reg edit? Does that work for the tilt 2? i'll try that out if there's no PTT cab.
rvt1000 said:
anyone have a remap cab for PTT? i'm running an energy Rom so there's no PTT remap option. If no cab, has anyone tried the old fuze reg edit? Does that work for the tilt 2? i'll try that out if there's no PTT cab.
Click to expand...
Click to collapse
I'm curious in your rom...I just bought my tilt 2, and I really don't like getting too far away from stock roms. I would only consider a ROM that still gives me all the stock functionality...but add some tweaks for use and speed...and keeps the stock ROM general look and stability.
Could you provide some feedback on your ROM vs stock in those areas?
Hey BennyJ71,
Thank you so much for your suggestion! I followed your advice. The CAB, although a Beta, seems to work fine. IE is now my default browser - Opera continues to operate normally.
Unfortunately, this did not solve my issue like I hoped it would. I am trying to use a SkyGuide program. It worked great on my Tilt. I never git it to work on my Fuze, and now I can't get it to work on the Tilt2.
Still, I very much appreciate your help, and I like the IE browser a bit better anyhow.
Dave
anyone have any problem with playing videos on youtube? it says i need to install flash or i have java disable, but i have it enabled and i installed flash already. does anyone have the latest flash player .cab?
imabored said:
anyone have any problem with playing videos on youtube? it says i need to install flash or i have java disable, but i have it enabled and i installed flash already. does anyone have the latest flash player .cab?
Click to expand...
Click to collapse
Search for the youtube fix, there is a registry edit required to get it working