Related
i don’t see why we shouldn’t open a section for the 4100 here. A lot of the developments that goes on here also work on the 4100.
I have done some research on it and so far I found out that the ppc4100 use 2 file to flash the rom one is the boot and the other is the WM image just like the others do. Now both of those files are nb0 format and can be extracted with dumprom.exe which is available here. It can flashed back on the ppc4100 using a flash card to hold the image and triggering it by booting with the bootstrap.
Wish list
to edit the image file ( to change certain files)
to compile the extracted files from the rom ( to customize the rom with new programs or to custom update to a newer operating system )
what does anyone think?
u can change the press icon on the 4100 its located in a file called bobo.exe in the windows folder.
see? its almost the same there is very little change i think we need to sit down for a little while and think about how good this will do.
it will bring in more readers that would like to read about the 4100 thus u will generate more traffic that also will generate more donations
so pls i dont know how to get the athoraty's attentions here at least concider it
or comment
thanks
I am very intersted in the 4100 development as well.. I was hoping someone in here or maybe a few would be interested in sharing some knowledge and possible experience. I have done a lot of research and played around quite a bit with this over the last week using various XDA tools as well as hex editor, ect. If anyone would be interested in helping please post us here.
hey jr97ai. might as well start posting here maybe we will catch someone's attention and they will declare the ppc4100 a worthy of this site
---------------
the original rom files for the 4100 are the currunt morst recent update from at& however, both files are *.bn0 extention. as follows.
SP_E0402_230A.nb0
SP_K1112_230A.nb0
i recieved those files from audiovox a little while ago. jr97ai and myself have been working on this and have extracted the files out of the romfiles with the use of dumprom.exe. (great app by the way). i think jr97ai knows alot more about this than i do and can explain a little better.
i will attach the bootstrap rom file along with a letter that came with the cd that was sent from audiovox. i can attach the rom file as soon as i free up my bandwith
I have been playing around with mkrom and have been experiencing some problems. as it says on mkrom its not the most user friendly program. no its not, not at all, not even close. but i still try anyways lost but still trying.
if anyone can somehow point us to a direction it coul dbe verry helpful.
there might be a possibility tto use the exsisting xda WMse existing rom to use on the 4100. they seem to be similar. they do use the same operating windows after all.
well i tryed to post the rom file many times it didnt work. its uploaded in the ftp if someone can post it.
every time i try to post it shows this err.
Upload Error: Could not upload Attachment to ./files/sp_k1112_230a.rar
question to anyone who can answer.
to change the operating system from win2003 to 2003se wouldi need to change the bootstrap as well?
i am thinking i could use a nb1 and rename it to nb0 it should be the same.
if you would like to see a new section appear for the audiovox 4100 please post saying so. maybe that will gets omeone's attention.
we got 60 views and only 2 ppl have posted.
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
im working with audiovox ppc4100 , and if u wanna dump with rom for make permenent rill file and dont losse it when u make a hard reset ,,i think the best solution its when u replace rill u can make a completat backup in a sd card then when u have to make a hard reset u can restore your backup and all will work ok...by the way i have working well mms, photo contacts , npencil , ms money , etc.
not jsut the rilgsm
now that we are able to flash the rom to the ppc4100 i am thinking we could change the operationg system. i am running towards the wm2003 se . i am trying to look for a basic rom nb1 format so i can try to flash it.
i am thinkiing it will work but i am worried about the phone part of the ppc.
do u have any thoughts on this?
No ppc4100 folder, any help please!!!
faramisimo said:
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
Click to expand...
Click to collapse
Report about wrong user name and password
I need to reflash my PPC4100. Looking for rom and can`t find it. May be somebody have a original ROM from AT&T, or custom ROM, or WM5 ROM?
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.
== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?
http://wiki.psfreedom.com/wiki/HTC_Raphael
Thanks to everyone who made it possible!
Cheers
I'm not sure our devices can act in the 'slave' mode that he speaks of... but that would be interesting - and I'm not nearly proficient enough to understand a lot of the things he is talking about.
But, there are several devs who probably do and I'm sure if it's possible they will do it!
Isn't Headsetmode Slavemode,too!?
Update: There will be a Support for MSM72K Android Devices So Let's see if it will work
http://forum.xda-developers.com/showthread.php?t=772795&page=31
Guys from Desire forum have got it working.
http://forum.xda-developers.com/showpost.php?p=8025114&postcount=452
Is there any chance of getting this working in Haret system? USB controller should be the same in Diamond/Fuze.
It should work on raphael.. //psfreedom.com/wiki/index.php?title=Device_compatibility_list (place http: for the link cant post full links)
Although it seems that it needs to be compiled for it first and maybe its a matter of time till somebody does it. Dont know how to compile so have to wait
Can't we just include the files of the G1 Package in the ext2 and then it should work?
http://psfreedom.com/wiki/index.php?title=G1&oldid=140
Change the title of the thread for something more... interesting.
"[DEV PETITION] PSFreedom for Raph/Diamond (it's working on G1)"
Or something like that...
well a HD2 Version is out i will try to modify it to get it working with our devices ...
http://gamesquare.co.uk/PSFreedom_HD2.zip
There's nothing in that link.
Edit: oops. Link works. Just paste the url in the browser.
TaC said:
There's nothing in that link.
Edit: oops. Link works. Just paste the url in the browser.
Click to expand...
Click to collapse
Tried to simply exchange rootfs intrid and kernel and edit the startup but a pitty wont work so simple
It seems doesn´t work in HD2 too...
New build for HD2
http://forum.xda-developers.com/showthread.php?t=777120
Tried it too... It doesn't work.
Been trying to get something to work on my Diamond 500. I can get the haret to run, but errors out saying invalid execution or something... Then reboots...
Anyone try messing around with the files anymore? Maybe we can try to tackle what may be working in the HD2, that has it working on their phones.
It´s Done
PSFreedom Diamond port is READY!!!!
http://wiki.psfreedom.com/wiki/HTC_Raphael
Thanks to developers who make it possible.
Let´s try it...
axl79 said:
PSFreedom Diamond port is READY!!!!
http://wiki.psfreedom.com/wiki/HTC_Raphael
Thanks to developers who make it possible.
Let´s try it...
Click to expand...
Click to collapse
i'm sorry but fail invlid link...
Not sure how this works... Tried running the psfreedom.ko file.. Not sure im doing this correctly..
no backups^^
but i hope backup enabled version will be there soon
isnt working for me....
cant get playstation to debug mode