Hi there does anyone know whats going with my mda pro just sorted it out with help from your site it was stick on usb/serial ant top and v2.01 at the bottom screen fix this promblem now i have no service cant make or recive calles with my mda pro can anyone help me out thanx mono33
Ps when i do hard restet it says no gsm and d1.30 114wwe
Download and flash one of the radio only images, you can find some on the xda-developers ftp server.
ok thanx ive now sent it off it thc europ to be fixed by them ill get it back by a week on wendsday i hope lol.I miss the phone allready what will i ever do without it best phone i ever had
when you try to unlock with buzzdev uni unlock, sometimes you get no signal problem. try to run the unlocker again and flash the radio once again.
Related
hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks
Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
AppleCake said:
Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
Click to expand...
Click to collapse
you can find the ROMs at the XDA FTP site. Here is the link to a tutorial on how to connect to the FTP site :
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
You will find the O2 ROM there.
Cheers!
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Re: Cheers!
AppleCake said:
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Click to expand...
Click to collapse
Sorry, but I have a Universal and never had my hands on a MDA Vario. But for me to upgrade my Universal, I just run the ROM update IF it is the same ROM brand. If it is not same brand, meaning a T-Mobile ROM to O2 ROM, I don't know how to doit for the MDA Vario . Sorry
If i was you i would just do a rom update. To do so click here -> ftp://xda:[email protected]/Wizard/Roms/Qtek . Download RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Then click on that -> http://forum.xda-developers.com/viewtopic.php?t=33796 sign up and download lokiwiz - HTC Wizard Unlocker v0.2b from the first post. Unrar the file. Copy Enablerapi.cab to ya phone and run it and wait for it to finish. Then make sure ya phone IS connected to ya pc via active sync and Run Lokiwiz.bat ON YA PC. Type c then press enter. Ya phone should then soft restart. Ya phone is now unlocked. Again make sure ya phone is connected via active sync run File: RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Follow the instructions and DONT unplug ya phone.
By the way be carefull when updating rom, as if it is not done correctly ya could bugger ya phone up!
If after your keyboard layout is incorrect go here -> http://forum.xda-developers.com/viewtopic.php?t=39725 and download reg wizard.
As for GPRS setting i only know the settings for o2 sorry.
After few experiment upgrading using own customize ext rom,now my O2 EXEC can't get a signal from cell operator,when I use manual search the phone can detect a working operator but I can't get it to register to the network,it kept searching and searching.
I'm very frustated because I bought the phone at other country and there is no authorized sevice center in my localization.
Can someone know how to solve this problem because I've tried to upgraded it to every different ROMS I downloaded from the web but still I can't get it to register to the network.
Is this the hardware problem or software problem ? or is it the Simlock problem ? before this I have upgrade many times using different ROMS version and never have any problem with this.
Please Someone who have the know how Help me Out !!!!! many many thanks in advance.
I have an 8125, but I uses t-mobile. The phone is unlocked but I like the sound of the new upgrade from t-mobile. So if anyone know how to do this, please help.
I've tried to upgrade with the mda software, but it says my phone is not compatible. Any way around it?
hi
hi freidn
even i use t mobile mdaiii
i tried to upgread it but i got big error now phone is not even starting
it showing usb 2.05 wen its connected to usb
otherwise it showing serial v2.05
nothing els no switch on option not even reseting itself
kindly help me if you know the ans
thankx
Easy to do it.
Download the Tmobile ROM from the Tmobile site or this forum's FTP. Flash it. I have used flashed my 8125 with the Tmobile ROM so that my friend could use it for a week and the 8125 actually works better with the Tmobile ROM.
Hello,
yesterday i received my MDA Compact III from T-Mobile.
I remove the sim+CID Lock without any problems.
And then I wanted to flash an new rom.
I use the Artemis Update SPL method but now my Mda doesnt´start :-(
It stopps on the T-Mobile screen with the following Text :
IPL: 1.13.0001
SPL:1.13.0000
GSM:02.49.90
OS:3.4.0.0
I´ve done a hard reset three times but it doesn´t work and i can´t connect to activesync how can i repair my MDA:-(
What can I do?
Sorry for my bad englisch ;-)
THX
t00sTr0nG
As I can see you didnt use this http://forum.xda-developers.com/showthread.php?t=311403.
Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.
Yes I can get in to the Bootloader.
But no ACtive Sync Connection :-(
How can I flash the new rom without ActiveSync?Is it possible?
you have the original SPL so I can't say if it is possible.
I'm at the moment trying to make an rom for p3300 and til now all my rom's where bad and I had to use some official rom to get it back to normal.
I use P800w_SEA_ENG_WM6_Upgrade_20070713 rom to do that.
This is a wm6 rom but I always make sure that I have indeed have uspl/spl 1.1000 before any cooked rom.