I have a problem with bootloader of my Qtek 9090, when i make an hard reset, the mobile go in Serial mode with bootloader 2.08, but when i connect my mobile with usb, they don't change in USB mode.
I have tried on Windows Xp Professional with or without activesync
Windows Vista with Mobile device Sync control.
and with Windows 2003 server, but it don't change.
I have installed different rom, for example i have the last rom of Helmi, 1.4 beta, but it don't work because i think i have lose any files...
Please how i can solve this problem?
I Had the same problem, mostly likely you have a sd card in your pda
Take it out, and try again....
Related
I am trying to upgrade from Ivan's ROM beta 13 to beta 15... Using the MAupgrade utility... however, everytime the utility resets the device to start the ROM update i get "USB device not recognised" from my PC and the update fails to start... eventually i get a connection error message.
This used to work just fine... however, recently i installed Activesync 4.5 Beta 2. Could this be causing the problem...? otherwise i'm not sure what else might be causing this...
I have also tried running the tool in bootloader mode with and without "USB connections allowed" ticked in Activesync but with no success...
Can anyone help me please?
Trying to clear registry before upgrading ?
Have you tried to clear registry before upgrading?
Hi Kassel, thanks for your response.
I have done a hard reset prior to upgrading... wouldn't that clear the registry?
If not please let me know what else i can do that might help.
Also, it seems very strange that i can't seem to do the ROM upgrade from bootloader mode.
I think i might be having a problem with GetDeviceData as it seems to stay in the "checking the information on your device... please wait" for forever when i try to upgrade from bootloader mode.
If it does come up, then the panel which says which version is on my device and which version it will be replaced by is blank?
This is not the case if i try to do it through activesync (with the device set up as guest).
What might get in the way of reading the device data? I made sure it went from serial to USB when i plugged the USB cable into the device and i have tried different cables...
My bootloader appears to be V1.00
hmmm... any thoughts?
Same here...
I also have the same problem.
I installed ActiveSync 4.2
Alse after having installed AS, the MTTY program doesn't see the USB port anymore, just some COM ports.
Same to me too
I have ActiveSync 4.5 bata at work (Which couln't upgrade ROM)
while my notebook with ActiveSync 4.2 work fine
Wow, it's great to hear that people are having the same problem...
Is it possible to back track with Activesync? Is 4.1 still available?
If not, i think i still have an older version running at home (i hope!)...
Is this definitely the issue then?
l_pete_l said:
I have ActiveSync 4.5 bata at work (Which couln't upgrade ROM)
while my notebook with ActiveSync 4.2 work fine
Click to expand...
Click to collapse
I have ActiveSync 4.5 and upgrading my Jasjar was successfully done with the ROM Version: (1.90.96 / 1.13.00 / 42.47.P8)
Sorry for not knowing, but is that one of the AKU3.2 ROMs. Not sure if it should make a difference, but just curious.
Also, did you need to use the MAupgrade Utility?
Cheers,
What happens with the USB drivers after installing ActiveSync 4.2
The strange thing is, that I tried connecting my MDA Pro to a PC without ActiveSync on board.
USB ports were visible using MTTY
I installed ActiveSync 4.2 and only COM ports are visible in MTTY, the USB port has vanished.
Can this be caused by the USB driver that comes with the ActiveSync install ?
If I put my device in bootloader mode, it sais USB on the PDA screen, but the utility for the ROM upgrade doesn't see the PDA and comes up with a device not connected error.
I would really like to try out one of the new ROM's by Ivan or JwRight, but am unable to, because of these USB problems.
So please someone help !!!!!!!!
I have the same problem... if i put the device into bootloader mode, "serial" changes to "USB" but the PC comes up with "device not recognized"...
Hi all
Artemis with oficial Mobile 6 and sync with 2 PCs...one day don´t conect to any PC.
I´ve called to HTC´s oficial service and their answer it´s I have a problem with an antivirus or windows xp updates or another thing in my PC´s and my artemis it´s blocked, and only can to delete completly my memory.
Anybody know another system less agresive?
Changing usb-pc options in my Artemis doesn´t run
Thank you
Are you using Active Sync (XP) or Windows Mobile Device Center (Vista)
I have windows xp on both PC
do the following in the order prescribed with a sync attempt between each
unplug and replug
soft reset
uninstall/reinstall activesync
hard reset
Config: MacBook Pro, Leopard, Parallels, XP.
Have downloaded the new official norwegian ROM, start it in XP, get bootloaderscreen on Diamond, then this message on Mac:
"USB device you are trying to connect to the virtual machine is being used by another application. Close that application or unplug the device and plug it again. Then try to connect the device again."
Cant find any programs using USB at all, also tried clen startup.
On P3600 upgrading ROM on this config is no problem.
What do I do wrong?
HP
Did you start up parallels before or after connecting your Diamond to your mac?
I'm on a 20" iMac,
I'm using bootcamp for XP and that works fine. I think your problem is that when you connect a usb device to your mac, Leopard loads it in a certain way. Maybe iSync or Missing Sync detects your device (check for the iSync logo in your toolbar). Try to disable iSync and check if Leopard mounts your MDA as a disk).
I'm not on my mac right now but i will check if i can find the problem when i get home.
New Bootloader solved the problem.
Thanks for answering.
HP
hpn said:
Config: MacBook Pro, Leopard, Parallels, XP.
Have downloaded the new official norwegian ROM, start it in XP, get bootloaderscreen on Diamond, then this message on Mac:
"USB device you are trying to connect to the virtual machine is being used by another application. Close that application or unplug the device and plug it again. Then try to connect the device again."
Cant find any programs using USB at all, also tried clen startup.
On P3600 upgrading ROM on this config is no problem.
What do I do wrong?
HP
Click to expand...
Click to collapse
What you did wrong is getting a Mac!!!! heheh just kidding!
hpn said:
New Bootloader solved the problem.
Thanks for answering.
HP
Click to expand...
Click to collapse
What bootloader solved this for you? Please explain
hi friends
i am not abe to find out where is the usb to pc icon on my newly installed htc snap rom
my active sync is not working
as i wanted to uprade to rc2 of the same rom
please help
can we flash without active sync?
Same here
I had the same problem with vista's mobile device center. It would not recognize my phone. Luckily I had an old windows XP desktop that would recognize my phone.
I don't think there is currently a solution to get the current build of the energyrom to work with mobile device center in vista. Which is too bad cause I would rather not use XP everytime
thanks for the reply
but i have windows xp pro
and still the active sync is not working and i want to flash the rom
how can i flash it as i have to unlock through sda unlock application which runs only through activesync
Maybe you guys should continue this discussion where it belongs... I might see it there... LOL
imate ultimate 9502 stuck on "PLease reconnect to PC and run the upgrade again"
PROBLEM SOLVED!
hi guys,
any idea on this error, i have tried the posted solutions here, but nothing works. tried it on windows 7, windows xp. not connecting with activesync.
reason:
flashed 1.73 rom. then it went this way.
hard reset keys wont work.
when using XP, and running the 1.77, it will just say on the screen , "Sending data to mobile device, you can check the schedule on the device screen" but nothing happens..
on windows 7, it says Error 203. saying it was not connected via activesync.
any idea how to revive this phone.
thanks so much
disconect from pc
remove batery
put batery back on
put device to bootloader
connect to pc it should recognise it
run again eum
thanks mate,
but it did not work. still stuck on the please reconnect to pc screen.
br
Problem solved!
Problem solved!
here's what i do, i set the compatibility of WMDC to Vista, then set the compatibility of the 1.77 9502 image to Vista also. works like magic...
br