It's a dream: an SDIO GPS with integrated slot where you can put a(n up to) 2GB MicroSD memory card.
http://www.spectec.com.tw/sdg810.htm
It's a dream because I read that it has drivers for Windows Mobile 2003 but I didn't find drivers for Windows Mobile 2005 to make it work on my HTC Universal.
I invite you to write to them that WE WANT drivers for Windows Mobile 2005!
Here is their email address: [email protected].
It sure looks great but unfortunately the SD slot for our Universal is located at the bottom.
Also, this device requires the slot to be SDIO capable but I doubt our Universal's slot is. I hope I am wrong though
News: Spected released drivers for WM2005!
> It sure looks great but unfortunately the SD slot for our
> Universal is located at the bottom.
True...
> Also, this device requires the slot to be SDIO capable but I
> doubt our Universal's slot is. I hope I am wrong though
I hope it too
Here is pic of Spectec mini GPS in Jasjar
http://www.geardiary.com/?p=1894
I very interested in it too, but from picture it seems to still protrude pretty considerably. Fear I might snap it. Found some on ebay for around $150, so might get one and see how I fair.
sdg 810
it does not function on jarjar or qtek 9000
somebody has you it in driver for the jarjar
ummm?
didnt think it did either. mobileplanet even specifically states it does not work with HTC PDA's. but wondered/assumed from picture in the link it was operational and not just visual. well, so much for that. probably was a bad idea anyhow. probably should go with BT GPS, but I hate idea of having so many things to charge....BT mono headphones, BT stereo headphones, BT gps, BT keyboard, and the PPC....be nice to have "BT charging technology"....wouldnt that be something.
navicon?
dunno if you guys already read about (navicon), just found out about it on couple posts from early last year. i gonna look into this as gps solution. anyhow, just wanted to share.
Tested this product, but it doesn't work on every PDA with SDIO slot and WM5.0 I tried it with.
Installed the driver, but both the GPS and the card slot refuse to do anything.
The MicroSD (tried several) won't show in the file system, as it prompts for formatting after inserting in the iPAQ hx4700. When I press OK, nothing happens and the card won't show up in the Explorer as well.
The GPS shows up in the GPS list in TomTom Navigator 5 and 6, but when I select it, the program keeps looking for a fix, without success, even after 1 hour.
I tried lots and lots of SDIO devices, but none of them seem to work. It might be a faulty sample I received from Spectec, but until that isn't sure, I say: damn what a 'pain product'.
It may be al late respond, but it works on my hx4700 as a GPS, installed with WM 6.1, only the card reader doesn't. Fast fix and with clear sky 10 satelites. It even receives indoor if you are close enough through a window.
Tomtom 6 has difficulties, but miomap 3.2, IGO 2008 work just fine.
You have to install GPS tweak first, to find the com port. It's com 6, bautrate 38400.
Swaped the SDIO for the Bluetooth model
Spectec was surprizingly helpful when I contacted them about the lack of compatibility with models the GSP SDIO was supposed to be compatible with. They gave me the Bluetooth version which worked with my ipaq 1910 and am now testing with my HTC universal. Theorectically it would work with any BT PDA even without a SD slot.... that is if you could figure out someway to power the thing.
I don't even have a Universal and even I know that it is SDIO compliant... :S
And now???
So, I've got here my NEW Qtek 9000 ready to swich from WM5 to WM6.1 ROM.
Is there anybody can say Spectec SDG-10 is finally WORKING now? (seeing satellites and reading maps on the enbedded microSD)
Spectec-sdg 813
I have a SPECTEC SDG-813 which I have tried with my Wizard (Cingular 8125) and a laptop. I have found that it does not work well with either device. It aquires satellites runs for about 30 seconds then locks up. Which than requires a reboot and repairing with BT.
So it has been very frustrating and SPECTEC support has been very poor. Their inital response to my request for help advised me how to set the device up under BT. I had to resend the message and point out to them that the device is setup and aquiring satellites and then locking up.
I have been waiting to see if there will be any further advice.
Related
hi....ive installed the medion sat nav software [courtesy of one off the guys here!]..on xda1 running wm2003....i have a haicom gps connected, which is confirmed working. However the medion software cant find the gps......any ideas?....or is it totally incompatible, i know the medion unit comes with its own gps.
It runs on a pxa 250 processer running at 400 mhz, maybe it isnt compatable with the early arm processer, it comes with a standard serial gps so I dont think it is an issue with the gps.
medion
i understand that..but the prog itself is running ok?
I decided to try the medion program to see what the problem was, I am using xda1 with the siemens/att wm2003 upgrade, the software found the digitraveler gps right away, it is now showing 4 sats, it is set to com1, beams are switched off in settings/connections/beams. It works perfectly, the haicom should also work as it uses 4800 nmea settings for gps output so I have no idea why it wont work for you, it is a quite impressive piece of mapping software, I am going to trial it in the car tomorrow and se how it functions, it has me locked on to my address at the moment and looks very accurate while static which is a good sign.
Sounds like a good bit of software, could you let me know if there is anywhere I can get it on a trial before I buy ?
Cheers
I have found another anomaly with the Medion software. It was working fine on the XDA1 with WM2003, I then installed it to my xda2 using another 256 meg sd card made by Sandisk, it worked fine on the xda2, however when I try to use the sandisk sd card in the xda1 it will not bring up the names when trying to search for a place to naviagte to, I then tried a Dane Elec sd card and it worked fine in both the xda1 and the xda2. I find it very weird that a "Standard" exists for memory cards but in practice the standard is far from standard.
Hi,
I used the medion software with my XDAII ROM 1.72 and Dconnex DC-230 bluetooth GPS receiver, it worked fine with no problems apart from the annoying (make a U turn) when the software can't keep up with alternate route.
So I Had to go back to TomTom 2.
Still contemplating an upgrade to 3 or shall i wait for 4.
I've got the medion loaded along with tomtom3 and they're both running fine using my rikaline wired gps receiver.
The reason (as explained to me) that it won't work is that its tied into the receiver that comes with the medion (royaltek sapphire) and this has a slightly different set up.
To get mine to work I had to install Sirftweak from www.pocketgpsworld.com and also m/s visual basic. Then run Sirftweak and alter the VTG setting from 0 to 1.
Works for me but doesn't work for all gps receivers apparently.
DON'T alter any other settings
Good luck
Petest
Does anybody have experience of Navman GPS software on the XDA II. I loaded the newest operating system as per instructions and then loaded the software. Now whenever the software is run, the whole phone runs at about a 1/50th of the speed.
Any suggestions as desperate. :?
spottrader said:
Does anybody have experience of Navman GPS software on the XDA II. I loaded the newest operating system as per instructions and then loaded the software. Now whenever the software is run, the whole phone runs at about a 1/50th of the speed.
Any suggestions as desperate. :?
Click to expand...
Click to collapse
Turn off incomming beams in control panel and try again!
Let us know how that goes? 8)
Thanks.
I tried turning off all beams but to no avail. Still painfully slow
What SD Card have you got the maps on? Make, Size etc
i have a SanDisk 1Gb SD card. Made in china
I was struggling setting up my Navman 4100 and also experienced a major reduction in the speed of the mapping software. It turned out I had the wrong com port setting in the GPS Status screen. I had no idea which com port it should've been until I followed the instructions here http://www.navman-europe.com/support.php?id=AA005410&faq=56
The EnableCharPin hack finally allowed my gadgets to talk to each other properly, thereby informing me of the correct com port to use.
Stick with it Spottrader, it's a pain to set up, but I can vouch for the fact that driving around being guided by 5 satellites is probably the coolest thing you'll ever do on a mobile phone ! 8)
(By the way, my incoming beams box IS ticked.)
Same thing here
Installed tomtom on my xda, an ipaq and a mitac mio. Same thing happened till I changed the gps over to tomtom gps on sp2.
All work fine, (even the bluetooth one on the ipaq)
Go figure.
In order to fix my buggered wifi problem I purchased a 'G' sdio wifi card from spectec. I thought I would post my experience.
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
The only problem with it is that if the unit powers off or if you remove the card, you must soft-reset to gain access to the wlan driver again. The card will power up and flash, but there will be no connection... in fact the WIFI utility will not even open until you soft reset. All I do is run WIFIfofum and keep the card alive all the time.
BTW, if you use POCKETLAN with this, you can map a folder on a file share and pretend it is your missing SD storage card. Works quite nicely.... My plan is to buy a BLUONYX (when the come out) and use it as a massive SD Card replacement.
Vomithaus said:
In order to fix my buggered wifi problem I purchased a 'G' sdio wifi card from spectec. I thought I would post my experience.
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
The only problem with it is that if the unit powers off or if you remove the card, you must soft-reset to gain access to the wlan driver again.
Click to expand...
Click to collapse
wow you must really need wifi to make you buy a separate one...
but the problem with the wlan driver losing access when you power off the device or after turning it off is actually ROM dependent....
thanks for the info anyway regarding the card
Yeah. It seems to have something to do with keeping the driver alive and getting confused with the built in driver when it is time to revive it. Often WIFI comes back in the 'on board' form. I have been toying with the idea of just swapping the names of the drivers in the registry...
WIFIFOFUM2 does a pretty good job (if I remember to start it). The only drawback is battery power is lost.. (you cannot remove the card, even with it running).
I don't how anyone can live without WIFI on these things... there are just so many uses for it...
Skype... web surfing... syncronising podcasts directly...a whole host of lan services...vnc... windows terminal services...
I do a lot of support work now at home... I just carry my VNC or WTS connection around with me instead of being tied to a desktop/laptop... it's great!
i forgot to mention that it does not work in wm6. i tried. the driver locks up on install.
Really? I didn't realize that was an SDIO slot. Thanks for letting me know, the wifi on my uni is dead too, and i was thinking about buying a new phone. hehe
Is it Spectec SDW-821 SD WiFi Card 802.11b/g ?
I find black one (http://www.mobileplanet.com/p.aspx?i=132725) and blue one(http://www.buygpsnow.com/spectec-sd...821-sdio-wireless-lan-retail-package-613.aspx) in internet , does it make any difference?
I found blue one is always cheaper than black one while searching internet.
I'm palning to buy one since my O2 XDA EXEC WiFi has poor reception,. and I need to get better option.
It says Transfer data rates is up to 54Mbps at 802.11g, so I'm hoping I get faster speed, and range.
Any updates on this?
Vomithaus said:
...
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
...
Click to expand...
Click to collapse
I have an Qtek 2020 with PPC 2003 (ROM v1.75.103) on it and I just bought a Spectec SDW 821 b/g WiFi Card. It seems as if I can connect to my WLAN (it says 'connected' in the Settings menu) but when I for example start Pocket Internet Explorer I cannot surf the internet, because it says there is no connection??? When I then want to configure the connection I only cannot choose WLAN...
Any idea?
deschman said:
I have an Qtek 2020 with PPC 2003 (ROM v1.75.103) on it and I just bought a Spectec SDW 821 b/g WiFi Card. It seems as if I can connect to my WLAN (it says 'connected' in the Settings menu) but when I for example start Pocket Internet Explorer I cannot surf the internet, because it says there is no connection??? When I then want to configure the connection I only cannot choose WLAN...
Any idea?
Click to expand...
Click to collapse
It's a ROM related problem. I'm currently running c_shekhar's 6.1.1b version with a Spectec 820 b WiFi card without problems. See the c_shekhar's Himalaya (Qtek 2020) ROM forum here:
http://forum.xda-developers.com/showthread.php?t=369701
The 'b' version is not available anymore and some people complain about the 'c' version with the Spectec card, but try it out first. Maybe c_shekhar can send you the 'b' version to you personally.
Thanks for your reply. I hoped it could get it working without the scary flashing thing (). I will think about it...
Qtek 2060 (HTC Himalaya) SPV M1000
Insert Coin said:
It's a ROM related problem. I'm currently running c_shekhar's 6.1.1b version with a Spectec 820 b WiFi card without problems. See the c_shekhar's Himalaya (Qtek 2020) ROM forum here:
http://forum.xda-developers.com/showthread.php?t=369701
The 'b' version is not available anymore and some people complain about the 'c' version with the Spectec card, but try it out first. Maybe c_shekhar can send you the 'b' version to you personally.
Click to expand...
Click to collapse
Hello folks,
fist of all, , i appologies about my "rusty English language, quiet long time indeed, i dont practice... anyway !
Well , just buy some Spectec card b/g SDIO bluecard format, and some spectec GPS receiver to give some wifi and GPS connections to my old but nice Qtek2060 , my configuration is like deschman one: let see some details about it:
Qtek 2060 "Orange" SVP M1000
WM 2003: 3.66.2.238
rom ver: 1.66.02FRA
rom date: 02/23/04
radio ver: 1.10.00
protocol ver: 1337.18
extrom ver: 1.66.238
cpu: Intel(r) PXA263
speed: 400 mhz
ram: 128 mo
flash: 32 mo
flash chipset: 28F128K3
data bus: 32 bits
memory size: 14.57 mo
LCD: 240x320 TFT
colors: 65536
model n°: PH10A
ppc
IMEI: ***************
as you can see, i update the rom and the radio, and get better results
i was thinking: great ! gonna install the c_shekhar's Himalaya ROM, then get some cool new stuff
i tried to upgrade with the: WM6.1 AKU1.0(build 19199) RAMDisk-16MB Pagepool size-32MB for Hima(Updated 23.03.08), but with no succes. (in fact, the program does not install at all)
any suggetions, please ?
all answers, appreciated, thanks,by advance
hi,
I answered myself for the previous message, the problem is that, with an integrated USB bridge facade of my tour, deploiment of packadge did not take place as required,
morality: Always check your USB connection is directly connected to a USB port.
otherwise, everything works very well, no incompatibility, or problems, great!
Registry trick to fix WIFI
This is a trick to fix my O2EXEC. The internal WIFI died, so I bought a SPECTEC 11G SDIO wifi card. It works with WM6, however when you power off the machine the wifi stops working. You have to reset with the wifi card in to get it to work again. I suspected that it might be a problem with the old driver for the built in wifi....
I got a registry editor (REGEDITCE c1.2) and found all the references to TIACXWLN.DLL and changed it to point to WLAN11G.DLL
goto
HKEY_LOCAL_MACHINE
then
COMM
then
TIACXWLN
edit
IMAGEPATH
to say WLAN11G.DLL
then do the same on
TIACXWLN1
I have not tested too much, but initially it seems to survive a power down and a card replacement.
I have been testing for a few days now and it is working great. a few seconds after inserting the car, it connects.... and even shows the icon (which was previously there only when the built in wifi was on)
Vomithaus said:
I have been testing for a few days now and it is working great. a few seconds after inserting the car, it connects.... and even shows the icon (which was previously there only when the built in wifi was on)
Click to expand...
Click to collapse
Where can I buy products from this company ?
thank you
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
Try a search on the Hermes forum. I found lots of stuff.
I found THIS ONE . But there were MANY others. Some users reported success with some ROMs.
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
I have 2 Varios II and I can admit that I had some issues with TT6 with WM5. TT liked to freeze when I was typing in the address or browsing through menus. When I changed to WM5 AKU3.2 it was better, but still not perfect. Eventually, it was WM6 that helped me. Now TT6 is running without any issues (of course it can freeze from time to time when I have too many programmes running in the background). Just try any of new WM6 and everything should be fine.
I had TT5.21 which people said run fine which didnt on wm6 but TT6.1 works fine
Long time since i've been on here but while i was browsing about, i saw this problem. All i can suggest is using the inbuilt GPS and see how that works? I have TT6 as well and i have used it perfectly well on an XDA Mini, XDA Orbit, SPV M700, HTC Touch, HTC TyTn II... seems a bit odd that you're having these problems. Have you since cured the fault or is it still being a bit of a ****bag?!
While i'm here... anyone got the latest maps at all for TT6? Shout me on [email protected] if you have any info on TT6 or need any PDA / Pocket PC help.
Griz
ibanyard said:
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
Click to expand...
Click to collapse
Yeah, I had established that the gps was working fine, I've been happily using it on my ipaq 2210 for ages. Then with the Hermes testing with gpsgate and some other stuff showed no problems.
The problem I had was that my TT6 was a 2GB SD card version and I didn't have micro SD big enough to test it. I had about 1hour to play with my friend's one and that's when I discovered the two problems.
He lent me the card to play with this evening and I've made a little progress now. I've sorted the flakey GPS operation, primarily by changing the com port, deleting the pairing and pairing again. So far that's not dropped out since.
Tomtom runs but freezes, this appears to be a confirmed problem which I hope that WM6 will solve as (mean-machine) suggests.
I feel a lot happier that the damn thing runs at least. The freezing appears to be related to cpu usage as I find that that zooming right out on a map is a good way to cause this to happen. The menu screens can be a problem too and the rest appear intermittent. As others have stated in other threads, hitting the red button and then switching back to TT will free it up.
I guess the next thing is to study the Wiki and try an make sense of the order things need to be done to put WM6 in, which Rom if any, which version of WM6. ... Information overload, so I think I need to take it slow and ingest the data .
Thanks for all the replys guys, it amazes me how much support HTC has and how many of you are passionate about them. Up till a few months ago I had never heard of HTC, now I doubt I'd consider anything else.
TomTom6
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
rbin said:
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
Click to expand...
Click to collapse
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
todd_jg said:
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
Click to expand...
Click to collapse
Great link, thanks Todd. Reading glasses are on already.
TT6 w/Pharos and Holux recievers work great
I've an AT&T Tytn upgraded to WM6 and have no troubles with my Holux or Pharos receivers and TT6.
Everything works great EXCEPT issues with data connections such as TT Buddies or traffic. This isn't unique to the PDA version of the software though, as I also have a standalone TomTom GO 910 paired with the phone and it works almost okay as a bluetooth speaker phone, but constantly has trouble getting a good data connection.
My $0.02
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have used TT6 on my MDA VArio II (TyTn) for almost a year...no problem. Now I have the TyTn II
Same here.. been using Tom tom 6 on my Tytn since the day i installed wm6, no problems here, works like a charm!
HEAT???
I have been using TT6 on my Imate JASJAM running the DOPOD WM6 ROM without much trouble (no hanging etc). The only problem I am experiencing is huge power drain and the unit being physically hot when running TT. Maybe this power drain and potential overheating can cause some units to hang and playup, or potentially any unit given the right environment!
Anyone else finding their units getting a bit hot?
I've been using TT6 on my Tytn (MDA Vario II) almost one year now. No problems. Started using TT6 while running WM5, upgraded to WM6 (schaps rom), reinstalled TT6 and it just continued as before. No problems, no hangups no freezing. I've been using all kinds of different charts with TT6, so I don't think the problem is with TT.
louiscar said:
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
Click to expand...
Click to collapse
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
I have been running TomTom Navigator 6 on my JASJAM for some time. The hanging problem described is probably caused by having all the Points Of Interest (POI) active.
Go into the TomTom settings menu and de-activate ALL the POIs. Try it, then only turn on the ones you actually require.
oltp said:
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
Click to expand...
Click to collapse
Doesn't work either. Seems that after a soft-reset the BT connection with my GPS is f*d. Very strange because the BT headset doesn't suffer any of this. Maybe time to buy a new GPS, but with WM5 I never experienced this behaviour.
I found that with tt6 you need to have the WM6 internal gps settings set to "None" for both program and hardware port. Then make sure the box is checked in the last tab so it autodetects the com ports. Once all this is set and you goto add a bluetooth gps device in tt6 it gives you the option to use com port 0. select this port and it should detect your gps unit with no probs. Been running tt6 on my 8525 with tnt's latest cooked rom and things couldn't be running smoother.
Edit: On another note. I used to use Telenav with my 8525 with the original at&t rom. I had the worst luck with that application. I would constantly lose my gps connect and I almost always had to do a soft-reset to get it working again. It is quite possible that Telenav was not the issue and that the particular rom I was using had bluetooth connection issues that were resolved when I switched to a cooked rom such as the tnt one. So for those using tt6 with BT connection problems you may want to try a different rom and see how your luck goes.
I have had the TP2 for a couple of weeks now and am generally very happy with it, but for some reason the Sim Access Profile is not working correctly with my Audi. I have paired the phone with the car and have enabled SAP in the phone's BT advanced settings page. Unfortunately the car will only access part of my phone book (only contacts under A to B are showing). The phone has all of my contacts on it and all of the other features of SAP seem to be working. I know that I can use JETware as an alternative but would like to know if I am doing something stupid with the phone before I go down the JETware route.
Any help would be appreciated, thanks.
I put my problem / question in this thread:
I use the TP2 in my skoda with a audi BT-SAP-Adapter this combination works, tested it before with my S/// X1.
When i pair my phone with the sap-Adapter the adapter recognizes that the TP2 can use the SAP-BT-profile and use the longer pairing PIN (when you pair a mobilephone wich has no SAP-profile the adapter use the Handsfree-profile and shows you a shorter PIN). As far, everything seems to work great.
But when my TP2 want´s than to connect with the adapter i see that the statusline shows the typical symbol for the flight mode and in the BT-menu at the BT-adapter i see the words "SIM-Access" for very short time (~ one second). Next the line “Stereo-profile” or something else (it is to fast to read) appears and half a second later the line “Handfsree” appears. The Symbol for a handsfree connection is shown at the statusline and the sign for flightmode changes back to the normal symbol for filedstrength.
what i tried as far to solve the problem:
1) i contacted the HTC-Support. They told me. that they made, at the moment, a test-row to solve specially the problems between HTC-WINMob-Handsets and car-handsfree-sets. So i got from there a software which i had to install at my phone and got a error-report. This i had to sent to HTC. No further comment from them.
2) i searched at very much forums at the car and mobilephone scene.
3) I tested the combination with different SIM-cards from different Providers and different ages.
4) I deleted my contacts at my SIM and wrote some newer one with an NOKIA Phone (this helped by some other SAP-car-FSEs)
5) I used No-Data
6) I installed the newest radio-rom.
Nothing of this brought some solution.
As i found at my recherches i´m not the only one who hast this problem with the HTC and sap-car-handsfree-set.
I thing, that this is a problem with the BT-Stack which is used at the TP2 and other HTC, is it?
Dose somebody solved this problem? Even with an other HTC with the same BT-Stack???
Has somebody any other idea to solve the problem??
Any help??
Merci
Quino666
I had no problems with SIM access on my 2010 A3 TDI -- worked flawlessly with my Tilt 2 with stock ROM. I haven't checked the car's phonebook lately, but last time I looked, everything was there.
1) With update on WM 6.5 or the first WM 6-version of the ROM?
2) Do you use a build in Handsfree solution with sap-profile or the adapter-solution?
Merci
Quino666
Hey,
I have a similiar Problem with the rSAP snap-in Adapter in my 2010 iDrive BMW. rSAP (telephony) just works great, but it only syncs the simcard's PhoneBook entries.
The BT-Monitor on my TP2 (Energy Rom WiMo 6.5.6) shows an active SAP and PBAP connection. Any ideas how I tell my TP2 to distribute the internal Exchange contacts and not the SIM-Contacts?
bye
Darky