ok so i smashed my alpine screen but still works so I plugged it into my pc and explored to the windows/messaging folder and copied out all 2000 text messages.
Then tried pasting them into my ba. but they arnt showing up in my inbox!
anyone know a soloution?
Related
Hi everyone,
Just recently picked up the O2 xda 2s unit, given to me free of charge by o2 for continuing my contratc with them. I must say im pretty impressed by the unit as a whole, yes it has its bugs but tell me which phone hasnt lol. I have SE P900 which likes to keep crashing on me every so often even though it has the latest firmware on it.
But anyways im new here and wanted to say hello and also ask a question that may have been asked before but i couldnt see it anywhere so here i am
Right is there any way i can put a different tone to the one that is already on there for the sms, mms and email alerts???. I couldnt see for the life of me anywhere on the pda where you could change the incoming tone alert unless im blind or something lol. On my P900 you can easily change or put any alert tone for your mms, sms and emails etc but so far havent been able to do that with my XDA2S.
So does anyone have any ideas if this is possible or not???...also not forgetting is there anyway the phone could be louder or vibrate when you have an incoming sms, mms or email as i tend to miss most of them when they do arrive.
Thanks for any advice
Hmmm so no one knows if they can do this or anything???
I have the t-mobile mda III so it might be slightly different with the menus however you might be able to make it work for yours.
As you wil know you are unable to select any other file than those already in the sounds and notifications menu however you can add an extra ring tone but that only works for phone calls.
As a work round when your phone is being connected to your pc you can explorer your device either thru my computer or Active Sync. This will then allow you go to the Windows directory like you would on a normal computer. If you then copy your file that you want as your sms tone to here you will then be able to select it from sound and notifications.
Another good one I found is that by changing the sound files in the windows folder you can also have a very nice sound everytime a menu pops up plus a whole host of different event sounds.
Hope this helps point you in the right direction as it works on the mda III
I followed the steps in http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home. My device seems to work fine except the following problems:
1) when I receive SMS messeange, I can see the entire msg in multiple lines. but I see blank msg if I click the read msg in my inbox (Text Message). I can't create new SMS message neither. Is it due to the missing of SIM Tool kit from WM5?
2) Pocket IE seems to have problems with lots of web pages, except MSN. I am using WiFi for internet connection. Pocket MSN failed to logined.
3) Phone rings after 4-5 rings from the caller. But it vibrates at the 1st ringer if vibrate is enabled. This led to some missed calls because callers think that I am not answering the calls. Does it happen on WM2003 SE?
kli said:
I followed the steps in http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home. My device seems to work fine except the following problems:
1) when I receive SMS messeange, I can see the entire msg in multiple lines. but I see blank msg if I click the read msg in my inbox (Text Message). I can't create new SMS message neither. Is it due to the missing of SIM Tool kit from WM5?
2) Pocket IE seems to have problems with lots of web pages, except MSN. I am using WiFi for internet connection. Pocket MSN failed to logined.
3) Phone rings after 4-5 rings from the caller. But it vibrates at the 1st ringer if vibrate is enabled. This led to some missed calls because callers think that I am not answering the calls. Does it happen on WM2003 SE?
Click to expand...
Click to collapse
problem 1 was resolved after I removed the html assosiation from the book reader (CE book 3.5).
problem 2 was resolved - my bad, there was an extra space after hotmail in the login id.
problem 3 was gone magically.
now the only issue I left is trying to add chinese encoding into Pocket IE. It seems that I need a wm2005 wince.nls file with regional settings for chinese. but overwriting the existing wince.nsl with a wm2005 version does not solve the problem -- the orinal wince.nsl file is still in the 32MB ROM, it's loaded when the device reboots. any one has the solution? maybe building new wm5 ROM will do? thanks.
kli said:
I followed the steps in http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home. My device seems to work fine except the following problems:
1) when I receive SMS messeange, I can see the entire msg in multiple lines. but I see blank msg if I click the read msg in my inbox (Text Message). I can't create new SMS message neither. Is it due to the missing of SIM Tool kit from WM5?
2) Pocket IE seems to have problems with lots of web pages, except MSN. I am using WiFi for internet connection. Pocket MSN failed to logined.
3) Phone rings after 4-5 rings from the caller. But it vibrates at the 1st ringer if vibrate is enabled. This led to some missed calls because callers think that I am not answering the calls. Does it happen on WM2003 SE?
Click to expand...
Click to collapse
problem 1 was resolved after I removed the html assosiation from the book reader (CE book 3.5).
problem 2 was resolved - my bad, there was an extra space after hotmail in the login id.
problem 3 was gone magically.
now the only issue I left is trying to add chinese encoding into Pocket IE. It seems that I need a wm2005 wince.nls file with regional settings for chinese. but overwriting the existing wince.nsl with a wm2005 version does not solve the problem -- the orinal wince.nsl file is still in the 32MB ROM, it's loaded when the device reboots. any one has the solution? maybe building new wm5 ROM will do? thanks.
XDA Orbit with WM6 (Black and Blue Version 4.0) + Garmin Nuvi 660FM Text Messaging Issues :
Okay I currently use my Garmin Nuvi 660FM as my Bluetooth Car kit and overall it is a great piece of Kit but there is only one option that does not seem to work correctly the SMS Function to read messages on screen and reply, this function would be very handy as you could safely and easily read the larger text while on the go.
I have used the Jetware Bluetooth add in version 1.3 and this helps a little in order to add a small bit of functionality such as only one ringtone is now used instead of the Orbit using it's own ringtone and the same for the Garmin.
Also the Text Message option seems to be alive but somewhat limited:
1.) Is shows the Inbox as 0/0 Outbox as 0/0 and the Drafts folders as empty, even though at the start of connection is says syncronsing messages, it neither syncronises the Outlook Mail nor the SMS
2.) Also when trying to send a text message, it goes through the process but does not send at all.
So, what I want to know is that has anyone got this function to work with either a Garmin Nuvi with that facility or even a Tomtom with the same and if so how did you get it to work.
Thanks
Robbie
for some reason my tp2 since yesterday says I have a text but I deleted every message sent, inbox, outbox drafts etc. I soft reseted the phone. used the clear sms button. it goes away as soon as I get another text it says I have 2 then I clear the new messagge and it says I have 1 any ideas?
use the attached file, copy it to your SD card and run the .exe
it worked thanks
Hi all,
I have a pioneer BT unit in my car, it only accepts vcards send via bluetooth on the phone to create a phonebook on the unit.
I can send my contacts one to one to the pioneer unit by sending them as a v-card in the contacts app.
in my old phone (touch dual / niki) i was able to select multiple contacts and send them all together to my car-stereo. I can't find this option anywhere.
I installed bluetooth file transfer, which has the possibility to send multiple contacts, but that doesnt work on my desire, it hangs all the time and it messes up my bluetooth settings such that a connection could not be made with the app installed.
does anyone have any clue, or great app for this?
Well i'm having a MB bluetooth module in my car.
The problem i'm having is somewhat the same as above.
I can upload vcf cards one by one but that would take me ages. I can also go to: "contacts>import/export contacts>Share visible contacts>Bluetooth". When i do this, it always fails...
Anyone has a clue to this?
Regards
Mr H