Related
hi my xda 2 has always seemed slow in comparison to my xda1 - i think i have put this down to lots of things running in the background perhaps thing i dont need can anyone put the spotlight on a remedy any help or comments around this would be very usefull - i am so frustrated i feel like reverting to my xda 1
It´s a bad version of the roms i guess. My old one had the same problem, really really slow. Just like a program have hang or similiar.
Try upgrading to a newer version!
defective rom...... ??? cany you direct me to a good version
hi i have now waded through numerous links and downloaded many files and have even set about installing the imate rom only to be given error code 120..... i then spent lots of time reading of a fix for this but it simply got too complicated for me....... i am concerned i might break the device if i foul-up - i also visited yorch.net for a cooked rom option however it apears to be offline ? if you could or if anyone could direct me to a .exe type install of a good stable rom i would be very gratefull. thanks for any help. :?
Perhaps the simplest way to diagnose why your device is slow, is to list down what is in your startup folder?
\My Device\Windows\Startup
xda 2 very slow ..... list of things in startup folder
\windows\startup
in this folder there are short cutss to all of the following .... active,aflashman,cflashman,checkautorun,chgDfLnk,IA-caller-id,MMreg,poutlook,stk, and tFlasMan.....
would you mind explaining to me the significance of this start up folder and what effects changing the contents of the folder would have on the operationg system ? your advice as to which items are probally not required would also be welcome ..
thanks Heath.
i don’t see why we shouldn’t open a section for the 4100 here. A lot of the developments that goes on here also work on the 4100.
I have done some research on it and so far I found out that the ppc4100 use 2 file to flash the rom one is the boot and the other is the WM image just like the others do. Now both of those files are nb0 format and can be extracted with dumprom.exe which is available here. It can flashed back on the ppc4100 using a flash card to hold the image and triggering it by booting with the bootstrap.
Wish list
to edit the image file ( to change certain files)
to compile the extracted files from the rom ( to customize the rom with new programs or to custom update to a newer operating system )
what does anyone think?
u can change the press icon on the 4100 its located in a file called bobo.exe in the windows folder.
see? its almost the same there is very little change i think we need to sit down for a little while and think about how good this will do.
it will bring in more readers that would like to read about the 4100 thus u will generate more traffic that also will generate more donations
so pls i dont know how to get the athoraty's attentions here at least concider it
or comment
thanks
I am very intersted in the 4100 development as well.. I was hoping someone in here or maybe a few would be interested in sharing some knowledge and possible experience. I have done a lot of research and played around quite a bit with this over the last week using various XDA tools as well as hex editor, ect. If anyone would be interested in helping please post us here.
hey jr97ai. might as well start posting here maybe we will catch someone's attention and they will declare the ppc4100 a worthy of this site
---------------
the original rom files for the 4100 are the currunt morst recent update from at& however, both files are *.bn0 extention. as follows.
SP_E0402_230A.nb0
SP_K1112_230A.nb0
i recieved those files from audiovox a little while ago. jr97ai and myself have been working on this and have extracted the files out of the romfiles with the use of dumprom.exe. (great app by the way). i think jr97ai knows alot more about this than i do and can explain a little better.
i will attach the bootstrap rom file along with a letter that came with the cd that was sent from audiovox. i can attach the rom file as soon as i free up my bandwith
I have been playing around with mkrom and have been experiencing some problems. as it says on mkrom its not the most user friendly program. no its not, not at all, not even close. but i still try anyways lost but still trying.
if anyone can somehow point us to a direction it coul dbe verry helpful.
there might be a possibility tto use the exsisting xda WMse existing rom to use on the 4100. they seem to be similar. they do use the same operating windows after all.
well i tryed to post the rom file many times it didnt work. its uploaded in the ftp if someone can post it.
every time i try to post it shows this err.
Upload Error: Could not upload Attachment to ./files/sp_k1112_230a.rar
question to anyone who can answer.
to change the operating system from win2003 to 2003se wouldi need to change the bootstrap as well?
i am thinking i could use a nb1 and rename it to nb0 it should be the same.
if you would like to see a new section appear for the audiovox 4100 please post saying so. maybe that will gets omeone's attention.
we got 60 views and only 2 ppl have posted.
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
im working with audiovox ppc4100 , and if u wanna dump with rom for make permenent rill file and dont losse it when u make a hard reset ,,i think the best solution its when u replace rill u can make a completat backup in a sd card then when u have to make a hard reset u can restore your backup and all will work ok...by the way i have working well mms, photo contacts , npencil , ms money , etc.
not jsut the rilgsm
now that we are able to flash the rom to the ppc4100 i am thinking we could change the operationg system. i am running towards the wm2003 se . i am trying to look for a basic rom nb1 format so i can try to flash it.
i am thinkiing it will work but i am worried about the phone part of the ppc.
do u have any thoughts on this?
No ppc4100 folder, any help please!!!
faramisimo said:
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
Click to expand...
Click to collapse
Report about wrong user name and password
I need to reflash my PPC4100. Looking for rom and can`t find it. May be somebody have a original ROM from AT&T, or custom ROM, or WM5 ROM?
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Hi eveyrone.
Background: I have been playing with the new Manilla from XBMod, but in doing so I have had to change my ROM. Previously was on a DUtty v4 ROM which I loved as it was a simple clean and fast ROM.
Now compared to Dutty's all other so far are Bloated and/or slugish (even before I put the manilla2 on).
Anyway I decided to see what it takes to make my own. I looked into it and found a nice simple basic tutorial with video here: http://forum.xda-developers.com/showthread.php?t=413782
Now this is really basic. I do need to learn a bit but I need some help in finding some information. Little things like how to edit the registry or how to change the boot image. Also need to find all the updated HTC apps, and a list of what HTC apps are available and/or ported.
Before someone tells me to use search or "google is your friend" I know that.
I can find out what each package does before I remove them and such. I can also find out how to do allot of these things too, but if you actually use the search also then you will find nearly everything is based on modifying an already installed ROM and not doing it in the Kitchen.
On top of all this I doubt I am the only person looking for a clean fast ROM so I will be releasing this to everyone. I would appreciate any suggestions for what to include and what registry edits to do. And would really appreciate a master chef coming by and helping a new apprentice chef.
Much appreciated for anyones help. (Remember I havn't asked for others to do it, I am asking for some help to learn it.) Lets just hope I don't burn anything...... .
Nothing?
No one wants a Simple Light Upto date ROM??
Kinda funny isn't it.
If I just waited around and asked who had what and all that, I would be flamed to a crisp and get told to read and use search. Just so you know I just used search for "OEM HTC" and got NOTHING.
I have been using the forums for about 6 months now and now I have decided to put my little bit of effort in, no one is interested in helping...
I always say that I only help those whom help themselves. I have and am currently helping myself, but I do need a little hand mainly to point me in the right direction.
Anyone?
Doesn't anyone want a simple ROM that is mearly a set of performance tweaks and updated OS and Updated Default HTC Apps?
Here's you answer - download one of teh full kitchens available (like Sulliers or Mondilv) and make it yourself.
Other way - download latest OEM rom (there's thread for that), ervius kitchen, and cut away to your liking - you will have your "latest light rom".
This is exactly what it is about. Either be ready and donate to the chefs who do such things (cook for demand for payment) or get behind the keyboard and start cooking. it's not that difficult...
This is how I started - got the kitchen, and step by step I go forward. I can't call myself a cook - I only know how to tweak a bit little things, but I'm learning. I suggest you start too
If you are searching for "clean, fast ROM" look no further than Mondilv's kitchen - probably the fastest Rom available now (if we are to trust Pietrucci's benchmarks, and I see no reason why not). Since it;s a kitchen you can do whatever you want to it. And if you are asking "how to edit registry" then maybe your searching skills aren't that good... This like the most basic thing....
Happy cooking!
Good to see people actually read.
At no point did I ask for a ROM. I do recall mentioning that I have downloaded a kitchen and am playing with it.
I did mention that I have searched and my skills in searching are perfectly fine. Considering that fact that I have found the registry information but NOT in XDA.
THe problem with XDA is that if you are to be succesfull in a search you must already know what you want to find (and therefore know the terminology to search for) which then means why search at all seeing you already know. And if you happen to find something you have to read the thread for a week to find the only single post within it that actually gives you an answer.
If you had read my first post properlly and understood it, you would realise I am after information TOO LEARN IT...... but maybe I'll take your suggestion and LEARN it instead.
It really pisses me off when people reply withou fully reading the post, and then tells me exactly what I said I am doing.
For all you know I could be a potential contributer to these threads and you have just destroyed my respect for the people on these threads. Thankyou for your lack of any real help.
Oh and one last thing, I was wrong with the last bit of my first post.
If I ask for the ROM I get flamed, If I ask for help to learn to build a ROM I get told to make a ROM or download one.
Catch 22 around here. Can't ask for help and can't get help. I wanted to build one but if this is the **** I am going to cop just cause I want to learn something and contribute, then its not worth jack ****.
And who are you to say if I have or havn't donated to other ROM Builders.
I would love to try your basic clean ROM, without all the pre installed applications. I have been looking for an up to date naked ROM, but haven't been able to find one.
Good Luck!!!
Well my intention is not a "Naked ROM" but a bare essentials one.
Just updated versions of all the apps that come with a HTC ROM and update OS Core, .NET etc.
Bare Minimum Apps.
good luck man. hope its super fast too.. and stable.
Can someone please point me to an UPDATED list of HTC OEM App Version and hopefully downloads.
I don't mind Ripped stuff, like from TouchFlo2 etc, but I want to leave out beta buggy stuff untill they are are fixed. For example I would want HTC Notifications as it seems to work well (unless I am just lucky) but I won't put in the TouchFlo3D 2 as it is still buggy and unstable.
Oh and VGA versions if possible for my Touch Diamond
Oh and were can I find a 21xxx+ version ROM that I can use?
Hmm, so I want to help, and the best you can do is smirk at my recommendations, and you just carry on:
can you point me here, can I have that or this, and oh, can it be VGA, and possibly with chocolate?
Man, I'm sorry, but there is something wrong. All the info you are looking for IS on this forum. I can't believe that you searched and didn't found. You either search the diamond forum, or use general forum search (which is google) and you just follow the links.
I don't want to belittle you nor argue with you. But just take a second and look at the way how ALL internet forums work. The first thing you do to gain credibility on any forum is to search, learn, then try to help. The last thing you do is to show up, and ask for links "on a platter" in rather demanding manner, and then criticize the answer. I just had a look on your posts and it seems that this is what you do. You repeatedly ask for ready solutions, and when people tell you to search, you are annoyed, or ask "does anybody read posts on this forum?"
I will say just this - google "netiquette" or "how to behave on internet forums".
Good luck in your search for perfect ROM for you.
And here you go not providing any form of help at all.
You say If I did search I searched the Diamond threads or used the Google search..
I have used the google one yes. And I have used the built in search searching for DIamond threads yes.
Now you imply that searching the Diamond is wrong??? I am own a Diamond so why not search the diamond threads.
This is exactly what I am talking about regarding the useless comments of "search the forums" crap I keep reading against any noob.
Instead of pointing people in the right direction you guys just simple say search.
There also seems a limit of more than 3 letter word length to search in the forum search. Cause each time I search OEM or HTC or HTC OEM then it returns No results.
Ontop of all that if and only IF I do actually find something then I have to spend hopurs upon hours readying all the Good job, well done comments before I find the one tiny little comment that actually has the answer. At that rate, for a noob trying his hand at cooking it would take 6 Months to actually find all the answers.
And now you come back and tell me to search, and worst still you tell me that searching for Diamond Rom Development info in the Diamond forums is wrong also. Were was the part that told me were to search?
it seems quite some posts are missing here... xda-developers did a restore from a backup or something after the mess last night? .
Anyway, eangulus. This is what I have so far:
- Started with a stock 2.03 WWE ROM.
- Put in a 21042 SYS + XIP (so it's now 21042 build)
- After that ripped out some stuff:
- NetCF (because it's 2.0 now I installed 3.5 from CAB, we need the OEM for it)
- Manilla
- Opera (I guess we want a newer build)
I also needed to remove it from the 'auto setup' list
- Windows Live
- MP3 Trimmer
- RSS Hub
- AdobePDF
- Cyberon VoiceSpeed dial
- Google Maps (Because we want a newer build or nothing at all)
Also needed to remove it from the 'auto setup list'
- JBedJava
- ZIP
- Office OneNote
- SampleMusic
- SQLCeMobile (Leave the SQLCE engine in)
- Transcriber
The whole thing build nicely, the final .nbh is 86.5mb.
There are a lot of things that can be stripped more ofcourse, and it doesn't have
any 'tweaks' included yet. Stuff I still gotta learn / try out.
Also converting cabs to oem/packages is on the agenda , and see what is easy from
the rhodium / topaz oems to include.
After the flashing and first boot I installed the older STock keyboard (bigger T9) because I still prefer it, installed newer google maps and installed the latest Rhodium Manilla from xboxmod. Runs fine and speedy (still can be faster by cooking it in though).
The notification enhancement works by installed a certain cab afterwards (not the one included in Rhodium Manilla), but Menu Enhancement and the 'manilla start menu' won't work.
My 21038 build that I was working with in the beginning seems just broken or something, because the 21042 XIP/SYS I used worked flawlessy. So I was doing it ok all along, just had broken files .
So, what now from here?
To get you a bit started:
In the end I used bebe's kitchen (http://www.darkforcesteam.com/showthread.php?p=3560). You need to create a user on that forum and wait till they 'approve' you to access the thread though.
In the thread there are a couple of video's posted how to get you started. I watched them, understood them and then started cooking and it worked . I don't know if bepe wants his files freely posted everywhere so I'll let you to get them yourself.
The ROM I used I actually downloaded from the HTC site (http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=2&dl_id=483). Entered my serial number and got the .exe with the ROM (the ruu_signed.nbh can be extracted by using WinRAR from the .exe).
The XIP/SYS I used are from here: http://forum.xda-developers.com/showthread.php?t=497586
Bepe's kitchen works with a OS.nb files (not .nbh files) so I used NBHUtil to extract it from the .NBH. NBHUtil was included in another kitchen, I got it from there. The kitchen it was included is actually an 'extended' bepe-kitchen, so you might want to play around with that one too: http://forum.xda-developers.com/showthread.php?t=469420.
But in the end, I only used NBHUtil.exe from it .
In his video on how to port a newer build to your kitchen, he uses a complete newer ROM as a starting point. He extracts the XIP/SYS from that. If you do it like me, you don't have a complete newer ROM but only a XIP/SYS downloaded from this forum. They give you a os.nb.payload and a SYS folder. So you skip the part that extract those from a ROM and just instead use the files downloaded.
And that's pretty much it. With those files and the (short!) video tutorial's on Bepe's thread in darkforcesteam.com I managed it make something. (video on starting a kitchen from a ROM, and a video on how to port the XIP/SYS from another ROM to your kitchen). Try it, if you get stuck I'll help you. It isn't hard at all!
..........
sorry
razkal1 said:
..........
sorry
Click to expand...
Click to collapse
or
razkal1 said:
here is .net 3.5
delete your ntcf forlder in sys and replace with this one
Click to expand...
Click to collapse
I actually have it already but thanks for helping out!
Trying out bebe's kitchen and trying an Upgraded OS build as we speak. Not as friendly as some of the other kitchens but with the vid's it is pretty straight forward thou.
Any luck in finding an updated list of HTC OEM Version Numbers and exactly what HTC OEM apps are available for us to package into it?
Im not going to do the manilla yet as I think its still a fraction too buggy. THe main one being atm is being out by 1 hour.
Once its much more stable and bug free then I'll package it. I do want the new notifications and menus thou. they seem to be workig OK.
ALso not sure if this is a HTC app or not but I have seen a new Wifi connection tool. It gives you a list of Wifi available in a Manilla Look, you then just click on one to connect. Do you know what that is called and who does that?
Also do I have to convert the .nb file to a .nbh again?
Known Filemanager.
Most popular is sTune.
PSAS 1.5 with TFS Browser (Samsung Modem)
PSAS can create folder.
BUT folder can't be delete.
Write protected. So maybe this is 1 reason why not possible in sTune...
TkFileExplorer_2.2.exe
Seems Original leaked Samsung stuff, but extreme old... 2001 or something.
Not really tested yet by me.
Maybe someone saw newer Version TkFileExplorer?
PSAS will soon offer few more features.
In PSAS 1.5 SD card is included, so not use Backup to Zip...
Best Regards
P.S.:
One dream is an Filemanager bada App on handset.
But at the moment it seems many restrictions, so no access to internal FS from handset...
gr8 information buddy
stune hangs a lot
still searching for the best file manager!
it wud be really helpful if u cud provide the download links..............for all these managers
THAKUR90
see section bada utilities u will get all these
sTune I used many times without problems.
PSAS 1.5 has few problems at the moment.
BUT will fix soon in new Version.
http://psas.revskills.de/
- Backup FS to Zip not work correctly
But you can create folders.
TkFileExplorer is attached. But not tested by me... maybe tooooo old.
Maybe someone could upload newer or complete TKTool.
Best Regards
adfree said:
Known Filemanager.
Most popular is sTune.
PSAS 1.5 with TFS Browser (Samsung Modem)
PSAS can create folder.
BUT folder can't be delete.
Write protected. So maybe this is 1 reason why not possible in sTune...
TkFileExplorer_2.2.exe
Seems Original leaked Samsung stuff, but extreme old... 2001 or something.
Not really tested yet by me.
Maybe someone saw newer Version TkFileExplorer?
PSAS will soon offer few more features.
In PSAS 1.5 SD card is included, so not use Backup to Zip...
Best Regards
P.S.:
One dream is an Filemanager bada App on handset.
But at the moment it seems many restrictions, so no access to internal FS from handset...
Click to expand...
Click to collapse
HI.
You can use mini commander on the phone to access all the internal files of the phone. its a java version..
mini commander sounds interessting.
Thanx for hint.
I will download and try and post later result.
Best Regards
Edit.
Now tested, seems nice. But not what I thought...
Anyway. Thanx.
Try MyExplorer. Its a native Bada app.
Today I tried MyExplorer.
http://www.samsungapps.com/topApps/topAppsDetail.as?productId=G00000248525
Also not exactly what I wish... But you have access to hidden folder on Memory Card.
[email protected]@[email protected]@__
Best Regards
I'm working on a FileExplorer for Samsung Wave, you can read about it in the other bada section (which i'm not allowed to post in):
http://forum.xda-developers.com/showthread.php?t=958457
I had a good play with TkFileExplorer. It should be able to connect with the Wave, but I was not able to make a connection stick.
TkFileExplorer isn't very friendly in terms of how to set it up, but I was able to get it to at least try and connect to the phone. However it times out afterwhile, and you see there's a new drive letter P:. But it disappears from TkFileExplorer as soon as you click ok on the error message screen.
I tried connecting it in Kies mode and also usb debugging mode. Still not sure which one it's supposed to be set to. But I did find some posts for older Samsung phones where they connected in PC Studio mode.
I'm going to try again on another computer as I think the usb drivers and such might be conflicting.
It might help to know what the COM settings are that WaveBackup and sTune use to connect to the phone. I've been leaving all the settings at default but there might be some trickery that needs to occur.
About incoming WaveBackup Tool.
More and more progress, see Screenshot of Version 1.0.7
Fell free to test self. Here are the infos:
http://forum.xda-developers.com/showthread.php?t=958457
@ mortara
Thank you very much for developing hard.
@ KrazyKong
Thank you very much for testing and reporting.
@ all
Please help to improve stability. Test and report will help to make Wavebackup more stable.
Thanx.
Sorry for resized Screenshot. Limit seems 640 x 480... so look into attached
WaveBackup107.rar for full 1920 x 200 Pixel.
Best Regards
Hello,
Version 1.0.7 of WaveBackup can now be obtained by everyone from my homepage.
No registrattion the forum needed anymore.
Patrick
mortara said:
Hello,
Version 1.0.7 of WaveBackup can now be obtained by everyone from my homepage.
No registrattion the forum needed anymore.
Patrick
Click to expand...
Click to collapse
thanks
i'll try it right now
mortara said:
Hello,
Version 1.0.7 of WaveBackup can now be obtained by everyone from my homepage.
No registrattion the forum needed anymore.
Patrick
Click to expand...
Click to collapse
Thanks man! you save me!
You're welcome! I just uploaded Version 1.0.10 to my homepage. It has an option to add files and folders to a 'blacklist' so that they won't be copied in file explorer operations anymore.
... Mortara hello I've been on your forum and I downloaded the application ... Unfortunately, the release is 1.0.9 ... where that next ... thanks by psycoy
Oh, sorry, you're right. Something must have gone wrong with the upload. I've fixed that now, so just download it again from my homepage (can't put external links here yet).
Version 1.0.12 of WaveBackup is up since a few days. I have done some smaller changes to stop annyoing owners of Wave II and 723 with that long error-message when connecting. Another change is that sizes of folders will be displayed now in explorer view, when the complete folder tree has been fetched. I've also fixed a few bugs.
Oh, and last but not least: Files can be copied now to the phone in explorer view (but still restricted to some special folders (<Appid>/Data for example)
I still can't post in the other bada board here, where the 'real' WaveBackup Thread can be found, so i hope everyone there sees this too!
@ All
I found a "new" version of TkFileExplorer - 2.4, it works fine with my Wave. TkFileExplorer is able to delete or rename folders and it is more stable than sTune.