Hi everyone,
i've installed in my 525 the modified ROM. Very Cool.
But now i have to sell it and i need the italian ROM.
do you know where i can download it?
Thanks
Did you find the italian ROM? I'm in the same situation and I do not know how to flash it back with italian rom. Thanks
I need to flash again the ITA ROM... I have some problems that not resolved witha Hard Reset... does anybody can help please? THANKS
I dont think Italian ROM is available for download yet.
You'll have either to wait until ASUS will release some Italian ROM upgrade, or somehow find a way to "dump" original ROM from another Italian P525.
I am afraid you've made a mistake flashing a custom ROM without figuring out the proper ways of "rolling back"
well, I didn flashed any Rom in the P525.
I installed a freeware Today plugin that crashed my system. After the installation the P525 freezed, also after a soft reset the system did not loaded properly crashing and freezing after the boot and forcing me to remove the battery everytime cause the soft reset button didnt worked correctly (I mean pressing it started the soft reset but the systme didnt load). So I decided to Hard Reset the Device but also in this case the system crashed after the calibration procedure or even during the procedure itself.
After a couple of HR and several SR now the system boot but it seems "unstable" and sometimes it freezes suddendly without a particular reason.
That's why I'm asking to flash ROM from the beginnig...it sounds strange to me but could be possible that the ROM has been changed by that plugin or some unlucky circumstances damaged in some way the ROM and this problem occurs everytime also after an HR? What can be happened?
Now I have 2 choice:
1) Looking for an ITA ROM (it's v 3.30+ phone 4.5.0 and still no upgrade from Asus even it was announced for last December!). In this case can I have access to another P525 to get the ROM in some way? If possible can someone explain the procedure?
2) Flashing an English ROM (v3.32+Phone 4.6.0).... and I'd prefer it since there has been some important fixes in the latest ENG ROM. But I'm afraid I will loose ITA T9 dictionary. If someone can help me explaining how to install other T9 dictionaries in a ENG ROM I will install the ENG ROM for sure.
Also I'd like to make some experiments with a WM6 ROM in a P525... since I want to reflash everything it could be the right moment to experiment... any suggestion?
Thanks a lot to everyone for help... I'm still novice but I'm learning a lot from your posts!
Related
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
lagoskon said:
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
Click to expand...
Click to collapse
The only problem here, is that I remove the radio from my stock rom before flashing, and I have had no HR or freezing problems.
Edit: Though.. atm, a single rom flash doesn't last much more than a day...
interesting thread
I don't take shortcuts, I follow the dr's order down to the T, and does take a good half an hour to 45 min to get things running, I will monitor of quicker way of doing it, if it saves me time, I would love to know too, so .. here I am watching with anticipation.
zocster said:
I don't take shortcuts, I follow the dr's order down to the T, and does take a good half an hour to 45 min to get things running, I will monitor of quicker way of doing it, if it saves me time, I would love to know too, so .. here I am watching with anticipation.
Click to expand...
Click to collapse
I'm from Mars m8
NEVER FLASH RADIO WITH CUSTOM ROMS TOGETHER
ONLY RADIO
ONLY CUSTOM OS
OR RADIO WITH OS FROM ORIGINAL SHIPPED HERMES WM6.1 ON mars
anryl said:
ORIGINAL SHIPPED HERMES WM6.1
Click to expand...
Click to collapse
there's no official shipped wm6.1 for hermes as i know
I know all this about not flashing Radio all the time with roms. I just say that the sequense of parts is not the same.
It should be IPL,SPL, Nothing , OS without flashing radio and NOT IPL,SPL,OS, Nothing which is the case now
lagoskon said:
I know all this about not flashing Radio all the time with roms. I just say that the sequense of parts is not the same.
It should be IPL,SPL, Nothing , OS without flashing radio and NOT IPL,SPL,OS, Nothing which is the case now
Click to expand...
Click to collapse
Whatever the order of the pices, wouldnt the firmwear still have to go to the same places in the chip? Or you would end up in brick town.
Didn't someone say the HR's where due to part of the chip not being overwritten, and when you flash another rom, (that isnt a FULL shipped) it ended up causing incomparability issues?
veyka said:
Whatever the order of the pices, wouldnt the firmwear still have to go to the same places in the chip? Or you would end up in brick town.
Didn't someone say the HR's where due to part of the chip not being overwritten, and when you flash another rom, (that isnt a FULL shipped) it ended up causing incomparability issues?
Click to expand...
Click to collapse
Remember guys the Real Big Storage ROMs overwrite the ext_rom portion to use as the extra storage, since it wasnt designed to do this we can assume that sometimes it might not work correctly.
Sure the tools and everything work fine with it all most of the time.
The reason flashing an official ROM seems to remedy the issues with Hard Resets is that if you reflash everything, the flash memory is refreshed back to the correct OS and ext_rom arrangement, then flashing an RBS ROM onto this area should in theory work fine thanks to the "spring clean" of the memory area.
mrvanx said:
Remember guys the Real Big Storage ROMs overwrite the ext_rom portion to use as the extra storage, since it wasnt designed to do this we can assume that sometimes it might not work correctly.
Sure the tools and everything work fine with it all most of the time.
The reason flashing an official ROM seems to remedy the issues with Hard Resets is that if you reflash everything, the flash memory is refreshed back to the correct OS and ext_rom arrangement, then flashing an RBS ROM onto this area should in theory work fine thanks to the "spring clean" of the memory area.
Click to expand...
Click to collapse
Thanks for clearing that up, though it was long those lines! (So close, but so far)
veyka said:
Thanks for clearing that up, though it was long those lines! (So close, but so far)
Click to expand...
Click to collapse
It wasnt until recently that I experienced any hard reset issues with any of the ROMs here, i noticed that leading up to a Hard Reset or freeze at the boot screen things such as file operations and running programs seemed to fail...with access denied errors and etc..
Also programs failed to save registry data aswell, coreplayer repeatedly asked for the activation key (which ofcourse ive got).
Leading me to believe that the storage portion of the OS was not working correctly...and since thats the part we have (pardon the term) misused )) then perhaps a reflash to the old configuration to give the storage area a flat format would do the trikc...which it did.
So its definatly advised, even if you havent experienced the issues, to one in a while before you flash a new ROM, flash an official ROM which uses and ext_rom aswell to give it a quick clean out.
lagoskon said:
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
Click to expand...
Click to collapse
OK I FOUND IT WHAT YOU MEAN THE TOOL FOR IT IS htcRIE_0.4.0.49.exe as it opens the original ROM deletes ipl spl gsm and saves new orig rom with the order off flashing - splash splash extrom os
Hello,
Does someone else have a similar problem?
Intro: some month ago I have successfully flashed my first HardSPL (1.40 OliNex), new radio (Radio v1.00.25.05) and several ROMs. Usually I flashed them directly from internal memory since I’ve found this way quite comfortable and IMHO also safer.
However, for flashing this way you have to able enter your bootloader...
And this is my first problem: after entering my bootloader I’ll get (after a while and a short show up of bootloader’s colorful screen) a grey screen with a message Trigger usb host…
After a while it is getting even scratches … and search and search ... so the only soft reset helps.
Does somebody possibly have a similar experience? Any tips?
FYI: my last ROM was A.Z.T.O.R. V7, however I admit, I didn’t make any hard reset after flashing (due to a mistake). Now I wanted to install a Duttys ROM. Since he recommends a newer version of HardSPL (1.93) I’ve been trying to upgrade… btw can somebody tell me where I can find it!? (I know where is the link, I have downloaded it personaly several times from differenet places, however there’s always written “signed” version on the *.nbh file! Is btw 1.93 signed version only?
And why can I see always just 1.40 in bootloader even when I’ve flashed 1.93 already?
And however I should rather ask this question Duttty personaly in his threat, why there is mentioned in bootloader ROM version 1.99 for V3.1 Duttys ROM?
Can you help me please to get out of this mess?
Many thanks in advance!
Regards, Marek
PS: Very last important question: when should I make the hard reset after flashing? Since it seems that my button tricky thing doesn really work, I am able to reset my XDA just from the menu... is there any problem? (When letting the system to start up properly first?)
Hi all, a question to anyone who may know the answer.
I have tried searching & reading but have only ended up twisting up my brain!
Ok, i have a touch diamond with Olinex unsigned 1.37 Hard SPL
I want to flash it with the newest HTC Europe stock rom but when i try to flash it, it starts and continues all the way to 100%, before giving me a error 270 - corrupted file image..
Tried downloading the rom again, different usb ports & pretty much everything else i can think of, to the point now that i just can't think of any other possible ways of doing it.
Can anyone help me out... pleeeeeeeease!
Sorry no quick answer as it soundsfrom your breif description like you are doing everything right...
What Radio and Rom are you on currently as this might give us some more clues as to what might be causing the issue?
I can freely flash between almost any rom that takes my fancy, just today i have flashed through aztor 2.0, duttys newest, vics 3.4, and the ultimate wwe.. trying to find a solution!
I can flash whatever radio i want, again with no issues. Maybe the links i have for the rom are corrupt? Like i said i've downloaded it twice, but still get that error after 100% completion.
adrenalin said:
I can freely flash between almost any rom that takes my fancy, just today i have flashed through aztor 2.0, duttys newest, vics 3.4, and the ultimate wwe.. trying to find a solution!
I can flash whatever radio i want, again with no issues. Maybe the links i have for the rom are corrupt? Like i said i've downloaded it twice, but still get that error after 100% completion.
Click to expand...
Click to collapse
You need to flash the newest stock rom using the internal storage method. Details are on the thread for the stock 2.03 rom
THe Internal Method is always the starting point....if that is not it then,
Yeah, when the error speaks about corruption, this generally means that there was a incompatibility issue. I've seen this problem and I don't recall if the incompatibility was the Hard SPL related or not. My suspicion is that it is .....
band27 said:
THe Internal Method is always the starting point....if that is not it then,
Yeah, when the error speaks about corruption, this generally means that there was a incompatibility issue. I've seen this problem and I don't recall if the incompatibility was the Hard SPL related or not. My suspicion is that it is .....
Click to expand...
Click to collapse
THe original 2.03 roms don't work on hard spl when used through the PC and give the error at the end on 100%.
Cooked versions flash succesfully normal ways however the original version will work properly via the internal storage method as discovered on the original 2.03 thread
I solved it by flasing the Olipro 1.93 hard SPL after flashing the stock 2.0 ROM.
As by everyone I had a corruption message on the screen after the 100% of flashing... So just flash Olipro 1,.93 over it and the diamond will startup with the new 2.03 ROM
After flashing some of the recent roms here on XDA, I seem to be having a bit of a problem.
After installing some programs,the program icons change in to windows logos and i'm unable to use them and my phone locks up instantly and only a hard reset will work.
If i do a soft reset i only get to the windows mobile screen or htc startup animation screen, then it freezes.
I have been flashing roms for a couple of years and have never had this problem,any help would be appreciated.
owz206 said:
After flashing some of the recent roms here on XDA, I seem to be having a bit of a problem.
After installing some programs,the program icons change in to windows logos and i'm unable to use them and my phone locks up instantly and only a hard reset will work.
If i do a soft reset i only get to the windows mobile screen or htc startup animation screen, then it freezes.
I have been flashing roms for a couple of years and have never had this problem,any help would be appreciated.
Click to expand...
Click to collapse
There's not alot we can tell you if you don't tell us about your device, rom, radio, hardspl etc setup.
I'm using C.T 6.4 original touchflo but have tried others. I have olinex 1.40 spl
and have a DIAM 100 model and radio 1.00.25.05
Try another ROM.............there is that freak of nature possiblity that the Hard SPL is incompatible (rare).
If another Rom persists, then move to Hard Spl 1.93. I know some Chefs recommend a specific Hard Spl at times but again it's rare.
Can i just flash 1.93 spl over 1.40 spl, or is there a different way of doing it.
*Edit* I just tried to install 1.93 spl and it didnt work it still says i have 1.40 spl,what am i doing wrong ?
These Hard SPL developer's edition has write protection. What you need is an APP called Jump SPL....http://forum.xda-developers.com/showthread.php?p=3328000#post3328000.....POST #10
I'm using CT 6.4 OrigTF Full with HSPL 1.93 with absolutely no problems (apart from a landscape bug that I solved by installing the original Diamond Volume Control). I highly recommend it, for me it's the best I've ever used in terms of speed, stability and functionality. Remember to Hard-reset after flash. You migh also have a bad flash or a bad download. If changing HSPL don't work, try to download the ROM again and re-flash.
When I upgraded HSPL from 1.40 to 1.93 I used a version with jump-SPL included, don't remember where I found it though.
Good Luck!
I always do a hard reset after a flash and have tried numerous roms but seem to have the same problem with all the roms.
Think i might have a problem with my diamond
Thanks for all your suggestions.
hello. I have a problem. I wanted to put new rom on friend`s Diamond but when it finishes, it says error 270, the image file is corrupted.On Diamond:Upgrade rom code error, please try again.What can I do now?I made soft reset and repeated again, nothing changes.I cannot even turn off the device.It only shows tricolor,security unlocked.(RUU Diamind HTC WWE 2.03.405.2 Radio signed diamond 52.51.25.26.1.09.25.23 ship.exe (100MB))
I am ok.Made it with a different rom.
O.k. I've tried a few different roms and hard spl today, and deleted my internal and phone storage and my phone is still not working properly.
It works fine after a flash and hard reset, but as soon as i turn it off then back on it freezes either on the diamond black boot screen or windows boot screen.
Looks like I need to get a new phone
Don't know if this is of any help but, when i cooked some roms for my "Artemis" i would get this sort of error if the rom was a little too big (I had added too many programs <5mb too much it would build and flash without error) it would work for a few days the slowly start to loose programs as if it had a virus or something deleting stuff slowly.
the only way to fix it was to flash a stock rom inc ipl,spl and radio then re-flash a custom rom, (a new custom rom alone would not cure it) i think the rom when flashing filled the area designated for the rom then started to overright the spl or ipl
just a thought? i don't know weather the diamond would suffer from the same problem with a bloated rom!
dose anyone know what the max size for a diamond rom is?
what happens if the rom is a little too big say 2mb?
Thanks,I've just flashed the new windows 6.5 rom which is working at the moment,but if it fails i'll give your idea a try.
owz206 said:
Thanks,I've just flashed the new windows 6.5 rom which is working at the moment,but if it fails i'll give your idea a try.
Click to expand...
Click to collapse
Man i had almost the similar issue in the recent times .. The only work around is to download and flash a stock Rom ( no matter which one it is ) , like what explained in the previous post . Use the stock fr a day or 2 , then flash it back .
Hello,
I have been flashing roms on my diamond for a while now, however the other day I tried one and now regardless of which rom I flash and which way I flash it (activesync or from storage card) after it completes the customizations and resets it runs the customizations again, resets, runs customizations..., you get the picture.
UPDATE: Its seems to be getting worse.. sometimes I freezes at the splash screen after the 1st or 2nd reset.
Has this happened to anyone else? Does anyone know how I can break out of this loop??
I would really appreciate any help as I love my diamond and can't afford a new one lol
I'm no expert... but I had similar problems with some cooked roms.
My solution was to update my HardSPL to 1.93
Also, don't forget to do a Hard Reset after flashing the rom and also try flashing a new rom from the internal memory.
Hope it helps.
Had the same issue a while back. Try MTTY here, solved all my problems.
Maybe you can try to flash a stock rom first, then do hard reset.
Then you can flash the custom rom you like.
I had a similar problem as before. I found it helpful to do it that way.
Hope it helps.
Thanks for all your help guys!
MTTY seems to have done the trick.. though I'm a little scared to flash a new rom now lol
great to heard that you solved your problems! I also face the same problem especially if flashing between wm6.1 to wm6.5 or the other way. Just MTTY then problem solved!