universal phone holder WITHOUT windscreen suction? - General Accessories

Hi all
I'm looking for a good, cheap phone mount for my XDA Mini. But i dont want it to be a windscreen suction mount. Can I get a nice cheap one from somewhere? Ideally it should be universal fit, so I can also stick my Ipod on to it if I want to
Thanks.

Here, this should meet your requirement:
http://www.semsons.com/aripmobvenmo.html
They have both color: white or black. If you have iPod and Magician, you should get the white one. I have the black one to match my Prophet.
Perfect fit for the Prophet/Magician! Fairly cheap also. ($5.99)
I recommend this webstore (semsons). They have a super excellent customer service. I cannot compliment them more.
Regards,
lie_ui

thanks. any more recommendations?

lie_ui said:
Here, this should meet your requirement:
http://www.semsons.com/aripmobvenmo.html
They have both color: white or black. If you have iPod and Magician, you should get the white one. I have the black one to match my Prophet.
Perfect fit for the Prophet/Magician! Fairly cheap also. ($5.99)
I recommend this webstore (semsons). They have a super excellent customer service. I cannot compliment them more.
Regards,
lie_ui
Click to expand...
Click to collapse
Thanks for the recommend, I ordered one today. $7.99 for black.I hope it holds to the vents well and doesnt slide around.

Hey lie_lu
can you tell me what the four screws in the bag are for? It seems pretty complete as it is and dont see what I can screw it too unless I make a board for it.

http://www.brodit.com/
can buy from pdahut.com - not sure if they serve US.
Works out quite expensive as you have to buy clip and mount separately, but you end up with quite a professional finish. No screws required so you won't damage your dash. Made for the specific make and model of your vehicle and PDA.
I will be purchasing one myself.

hashbrown,
Sorry, i also do not know what the screws are for.
I do not even use the vent clips. Do not like the air to blow to my Prophet. Also do not like the AC blocked by the Prophet.
I mounted mine to one of the unused empty space in my car and its pretty steady, have it for 3 months already.

Related

Car mount

So it's time to find a car mount for the SGS2.
For the HD2 I used an air vent mount (this). I don't like the windscreen suction mounts (just my preference, even though they tend to be more flexible in terms of positioning the device), and the positioning of the air vent mount is almost perfect in my car. The only thing that is a little annoying is that the fixed one obviously don't allow any turning at all, which can be annoying when it's sunny as I'd prefer to have the screen point more directly at me.
Therefore I'm looking for an air vent mount that has some sort of swivel included - basically something similar to this for, or perhaps something more generic like this or this.
Has anyone used any of these (or the windscreen suction mount equivalents) from either Ultimate Addons or Arkon? How well made and durable are they? How well do they hold their position?
Are there other ones I've missed that I should consider?
Thanks in advance for any input!
I'm looking for the same thing, preferably specific to the S2 (much better to slip it into a custom holder, rather than placing it in a generic one then tighten the grips etc).
Something like this (no link allowed.. see gripmount on mobilefun) on the air vent would be great.
I also like vent holders! I just buy a cheap generic one and modify it to fit my needs.
Obviously this involves taking apart my vent and drilling holes in the phone holder, put you get just the thing you need! Plus its also wayyyy more stable as you use cable ties to get it solidly in place.
The mounts that usually come with the vent holder are flimsy and usually end up falling off!
The gripmount on mobilefun looks great, but I can't see how it manages to fit the SGS2 both with and without a case! I'm using a silicone skin with mine and would rather have something that will work without me having to take it on and off. Is the mount slightly bendy so the phone just clips in? Anyone got any experience of these?
I've decided to just hold fire until the official Samsung mount comes out - it looks pretty good on their website and I can order the desktop dock at the same time.
Breffo multi-fuctional Car-dock/Cradle
I saw this product last year and thought this might be interesting?! My apologies for not yet have those for review, didn't need it yet. But when i have a car this i would definitely buy.
The brand is Breffo and the product is Spiderpodium, there website is www.breffo.com
Interesting idea . . . on fleabay for £13 (item 200603319280)
Might pick one up and see how it works as a vent holder . . .
Edit: The reviews are great, so ordered a black one off ebay. There are white ones for just £8 on Amazon if you're not fussed about colour! Will return and let y'all know how well it works . . .
Spiderpodium looks superb, definitely getting one of those. One of the ebay sellers is only around the corner from me, so I've contacted to ask if I can collect. Will report back once I've got hold of one.
I've made my own:
robbiekhan that looks awesome, good work. How much would you charge to make more had to ask lol
It's simple case (hah!!) of sticking and cutting a few bits together really so i couldn't charge to do such a thing as you'd be much better off doing it lol, plus it's fun, something you've made and it can be a conversation piece
My HTC Desire mount DIY article can be found on LifeHacker, method is exactly the same, just omit anything Desire for Galaxy S II
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
Looks so cool! What case did you use - the one from ebay you mentioned in the other tread?
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Yup same case!
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
That looks very good actually! Going to buy! If anything it means I don't need to take my phone out of the case
I'm going to pick up a Griffin Windowseat I think, as I need something compatible with other phones too.
I have got one one the magic mounts (aka Dash Genie), but due to the textured back the SGS2 doesn't stick
If you wanted universal vent mount, have a look at this by Herbert Richter. If you however want a device specific, and if you want a small project, than I see that Brodit holder for Samsung Galaxy S II seems to be listed, you can covert this into a vent mount or windscreen suction mount using this adaptor plate.
Nice - thanks. For now I decided to take a punt on the £8 white Spiderpodium for its uniqueness - when it arrives I'll see how well made and durable it is, and if that doesn't work out I think a custom/self-made solution might well be the way to go.
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
Click to expand...
Click to collapse
Looks good and cheap enough!
Mine arrived this morning, check out a quick review and a couple of pics here
Summary: great! Will probably get another one, in fact
robbiekhan said:
I've made my own:
Click to expand...
Click to collapse
Looks very good!
Let's see if I can make one myself
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
I wonder if this will work if you attatch it to the windshield...
On the left of the SGS2 there are the volume buttons. And the miniholder, is really, ehhhh, mini... So I think the phone will hit the window, or if you place it in the holder in a way the phone does not hit the window the volume buttons will be pressed all the time...

Car Dock Kit

http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
REVIEW:
Got the dock today. Gotta say, not too bad. Although I don’t really think it’s worth more than about $25 tops. The build quality is ok. Everything is plastic, but it feels kind of light (the suction holder). Guess that’s a good thing if it’s being mounted to the windshield.
What’s included: Phone Dock, Suction Holder, Car Charger, Sticky suction pad (to use on your dash)
Suction Holder
There are 3 main components to this. The suction it pretty heavy duty. Probably better than my Garmin windshield mount. Once positioned on the glass, there’s a lever you push down drawing the air out making for a pretty good and strong contact. To release it from the windshield is just as easy. Just pull the same lever up to release.
The holder allows for full 360 rotation of the phone. Loosen the round knob to position and tighten. Once tightened, it’s pretty snug.
Where the phone dock connects, the suction holder has a little spring loaded push lever that’s used to clamp the phone dock to the holder. Same method is used to release the phone dock.
Phone Dock
Again, it’s pretty light. I wouldn’t say it’s feels cheap but just really light. The phone fits in pretty sung. It’s definitely not going anywhere. The dock also has a cut out for the camera, which is nice if you want to take pics of the road or maybe even a video of the guy in front of you with a lowered Silverado with a mural of his trunk on his tailgate 
Once the phone is in, the bottom end of the phone dock slides in and out making the usb contact. On the back of the dock, you have a micro usb port for charging and a 3.5mm line out jack. My only concern is with time, this portion will get loose. Seems like there’s 2 positions this click into as you slide it one way or the other.
Car Charger
It’s a micro usb car charger. Nothing more to say. Always good to have a spare one.
The dock definitely DOES NOT accept the phone with any cases. Don’t know about skins though. It’s a pretty sung fit with. Going to head over to TMO sometime this week and pick up the a ZAGG Dry application skin and see.
Figured it would, but as soon as you slide the plug from the dock into the phone, it goes into car mode right away, even without it being plugged into a power source. This can be deactivated by going into notifications and clicking Deactivate Car mode.
All in all, I’d have to say I’m pretty pleased with it. Not really pleased about how much it costs, but hey…It would have been nice for them to include an audio cable with the package. I bought this to replace my older Garmin Nav. Figure it’s much easier having this than traveling with the Garmin.
Update: Looks like this is going back. The line-out doesn't work. Getting no sound
smellmyfingers said:
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
Click to expand...
Click to collapse
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Thinking of picking this up:
http://www.ebay.com/itm/Exogear-Exo...ccessories&hash=item588ef6bfb4#ht_4693wt_1270
Seems like a decent quality holder that will work no matter any case I use.
luckyduck69 said:
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Click to expand...
Click to collapse
Nope. Makes sense, T-Mobile just released the phone so they hiked up all prices on "new" accessories. It's all naming/branding my man.
Looks nice...if u get it post some pics please.
I have one but makes too much noise when the car moves.
Tmo Galaxy S2
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Was feeling frisky so picked it up at the store with the phone. Works great but the phone is held rather tightly and requires two hands to remove it when getting out of your car. Might loosen a bit over time, but a PITA for now. Phone also recognizes that this is a car dock (as opposed to desktop dock) and kicks on the VoiceTalk app automatically. Kind of nice.
-- edit --
Used a universal on my last phone... have to say that having the charger plug into the mount directly is hands-down worth the extra money. I hated having to find the dangling end of the usb cord every time I got in my truck... especially in the dark. With the made-for-it mount, you sit the phone in the mount and then slide the bottom part up which engages the charge and locks in the phone. All with one hand.
-GP
Dsmwookie said:
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Click to expand...
Click to collapse
Have one and the best part about this mount is that it sticks to almost part in my car. Aside from the really curved parts.
Bought my first car dock for my old Vibrant few months ago, now have to get it again for my new SGS2. Like before I am getting OEM directly from Samsung website. Not sure what TM sells but the one I saw in their store looks pretty crappy from some 3rd party vendor.
Sent from my SGH-T989 using xda premium
The car dock... excuse me, "vehicle navigation mount" I got at the t-mo store two days ago is a Samsung-branded accessory. Guy had to actually open the box that UPS delivered that morning. Perhaps your store didn't have them yet?
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
esdwa said:
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
Click to expand...
Click to collapse
they should start getting them in. There OEM it should be in green and white box with samsung all over it
$64,000 question: will it work with a case?
What do you think of these Herbert Richter German made windshield mount? The mount is used in a Pioneer AVIC-F500BT GPS which is quite heavy.
ctkatz said:
$64,000 question: will it work with a case?
Click to expand...
Click to collapse
Probably not as it is made to fit the device snugly. This is why I use a pouch belt clip as I use my phone all the time for navigation and can't be taking a case on and off every time.
My Exogear mint will be here tomorrow. I'll let you know how it is. Cost $18 shipped off Amazon.
Sent from my SGH-T989 using xda premium
Some quick shots of my Exogear mount. Sticks to just about any surface and holds most phones in a case. Video is uploading as we speak.
---------- Post added at 06:27 PM ---------- Previous post was at 05:44 PM ----------
http://youtu.be/PApQgF4Q8Lk
cheap but nice mount
Just rec this mount ordered 2 one for my s2 and one fr my wifes vibrant really pleased with them ordered one more {ebay}Samsung Galaxy S II T989 Heavy Duty Windshield Premium Car Mount Phone Holder
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Splaktar said:
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Click to expand...
Click to collapse
Are you referring to mine? It works with a case on.
Sent from my SGH-T989 using Tapatalk

[CAR] Best unofficial car dock / phone holder

As the official dock is way too expensive imo, I thought I'd start a thread where people can post their unofficial car docks they bought and the experiences they made.
So far I came across two docks, the [CAR] Passive holder from Brodit (2nd pic)
and one I found on ebay, sent from Hong Kong (pic below): Windscreen Car mount small (1st pic with text "one X")
This one also can be bought with various different mounting options. I am not sure how easy it will be to dock and undock the phone in the mount though, looks rather tight.
I think I will wait some more days / weeks before I'll buy something.
Any other car kits you guys found?
2nd looks pretty decent for a cheap mount
Here another one, brodit active, but really ugly...
chrishull85 said:
2nd looks pretty decent for a cheap mount
Click to expand...
Click to collapse
the problem is it's being sent from HKG, if customs here decide to have a look at it I end up paying CHF 35.- (double the amount that thing costs) customs service fee, I almost might as well buy an official one
I would get this one, but I need a seller here in Europe.
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
maxseemo said:
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
geenyous said:
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
Click to expand...
Click to collapse
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
maxseemo said:
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
Click to expand...
Click to collapse
Great find, thanks!
I will have to wait for it to pop up in Europe, if I buy from HKG I risk having to show it to customs which will cost me too much to justify...
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
maxseemo said:
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
geenyous said:
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
Click to expand...
Click to collapse
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
rikardo1979 said:
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
Click to expand...
Click to collapse
Just ordered one on amazon myself.
Your comment about not having to change the holder all the time convinced me and also the minimalistic design / small size.
GioDoe said:
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
Click to expand...
Click to collapse
It can definitely be used for that (did it with my HD2 myself), but the swivel one will also not cover the camera lense.
Just don't film yourself doing anything stupid...
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Shady Gambino said:
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Click to expand...
Click to collapse
Hey thanks for finding that.
This one here is pretty much spot on to what I been looking for:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
This is the one I purchased.
http://www.ebay.com.au/itm/160777560050?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I really like the way the suction on the windscreen works. Some of these other car mounts are horrible, they fall off after a few minutes, hours ect...
The fit of the HTC One X on the bracket is very tight, won't ever fall off.
Happy with this one.
Btw this one arrived... 6 days transit, not bad for HK.
The item is not the best though.
The neck is more stiff then my first erection when I discovered p0rn. Hard to bend.
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Not the best. Ebay didn't deliver.. usually they only have quality true? lol
Anyway, I will purchase that one from Arkon. Looks decent and can cater to multiple phones.
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
not bad this is, use to have one of these for my old HTC HD2
only problem is when you change your phone for something different,new than you have to sell this with the phone and buy a new one again.
So I've decide to go for some universal accessories as I was tired of changing the holders,dockings, chargers all the time. Especially in car access. as I always ended with reinstalling cabels, holders, etc..
But good solution for someone who don't mind to change or who's not changing phones often
andygatford said:
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
Click to expand...
Click to collapse
Sent from my Transformer TF101 using XDA
maxseemo said:
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Click to expand...
Click to collapse
Could you check the back of the phone holder itself, I ordered one just like yours and it has 'G21' stamped on the back. (G21 is the Sensation XL)
I can manage to get the phone in, but the fit is so tight I'm scared the screen will crack when I hit the first bump in the road...
maxseemo said:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
Click to expand...
Click to collapse
Yeah, it'll definitely fit with a TPU case as long as it's not super thick.

Good car holder for 5" phone

Hi, looking for good car front window holder for iOcean X7 Elite, it means 5" LCD. Have someone some holder in use and are satisfied with it? Ebay or chinese shop are allowed...
Florentpraha said:
Hi, looking for good car front window holder for iOcean X7 Elite, it means 5" LCD. Have someone some holder in use and are satisfied with it? Ebay or chinese shop are allowed...
Click to expand...
Click to collapse
I have tested every single car mount (all my reviews are here: http://forum.xda-developers.com/showthread.php?t=2192333), and found this one to suite my needs the best for Note 2: http://forum.xda-developers.com/showthread.php?t=2174449
The only problem you are in Prague, so you have limited choices where to buy it.
Thx for help. Arcon is not problem, Ebay save it...
Rsly said:
I found a holder in below link, very good
http://www.pipomall.com/360-degrees...es-and-tablets-black-p-673.html?cPath=583_598
Click to expand...
Click to collapse
Do you have it and actually use it? To be honest I have no idea how a bunch of small suction cups can hold a big/heavy phone or attach reliably to a textured case, etc. It looks like it could only work on a smooth surface without any texture or bump and definitely will not be able to accommodate a phone with a case. So it will be risky if your phone is attached naked to the back and you go over the bump where it can drop down in the car unprotected.

Best Car Mount I've used yet...and it's $7.

Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
I love this thing, it grips the device great, and the suction cup will go almost anywhere you want. I have mind suctioned to the top of my dash of my 08 dodge caliber. Even tho the dashboard is textured with some pretty deep ridges it sticks great!
Only con i would give it is that the grip is a little too tight, making one hand operation difficult. you can remove the device from the mount with one hand, however installing the phone into it usually requires use of your second hand to open the drip far enough. However it is a comfort knowing that it moto x isn't going to fall out.
SubliminalME said:
the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Teksu said:
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
Click to expand...
Click to collapse
My local Costco was selling a 2 pack of mounts that looked identical to this for $25 (after $5 instant savings) about 2 months ago. I'm not sure if they still have them, but of they do they aren't prominently displayed.
Sent from my Nexus 7 using Tapatalk
I think it would fit, actually.
Sent from my XT1049 using Tapatalk
Has it fallen off on you?
SubliminalME said:
Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Click to expand...
Click to collapse
SubliminalME said:
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Hey @SubliminalME, I recently picked one of these up, it does fit very well. Problem is that it either blocks the headphone jack or the charging port, depending on which way you put the phone in the mount. Have you found a way around this?
i bet you could drill a hole in the single mount pretty easily.
the better question (for me) is whether the phone can be positioned in the mount without blocking the camera. a windshield mount is only useful to me if i can use the camera. otherwise, it's going in a cupholder.
The Monoprice one is showing out of stock!! :/
UncleMike said:
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Click to expand...
Click to collapse
SubliminalME said:
I think it would fit, actually.
Click to expand...
Click to collapse
I ordered two of these and they came in the other day. Surprisingly, it fits well with the Seidio Dilex case. My concern was that there wouldn't be room for the integrated kickstand on the back of the case, bit there's just enough room for it.
I have an adhesive mounted Garmin-compatible ball (~17mm) on my dash that works perfectly with it.
i've got mine, but haven't taken it out of the box yet!
In for one
Thanks for the heads-up! Always have loved Monoprice and I can't bring myself to go the imagnet route (ie pop off the back) on the X. This should be a nice cheap compromise, especially since I already have the garmin ball installed in both my cars.
The best that I've ever used is the Tetrax Xway. PRevents the phone from overheating by clipping in front of the A/C, and works with nearly every phone/case combo. I've used it through my Droid Incredible, Galaxy S2, and Galaxy S4 GPE with numerous cases.
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
https://www.youtube.com/watch?v=awh6QP8-BBE

Categories

Resources