Hi,
Can anyone direct me how to unlock my Verizon XV6600 phone
to what carrier?
if its CDMA simply load the PRL file:
Go to http://corolada.com/prl/ and download a copy of the PRL file to your phone.
go to start->phone
Dial: ##778 Talk
service code should be :000000
go to PRL->browse
select the PRL file and hit update
once it finishes updating simply hit ok, and allow it to reset(ok again).
once it starts up your carrier is set up. you can go back into the service menu to change your number, and other settings as needed by your carrier.
the final step is calling up your service provider and giving them the ESN code off the back of your phone/listed on the "device info".
Enjoy your new phone.
Related
Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx
This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network
I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?
I used this ..so easy
so if you activated your phone for india service, would you be able to use it in the United States?
--James
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?
NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.
Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82
Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?
''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..
Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me
Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???
that's great thank you man
Thank you. it was more then easy.
Now it works.
help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.
I have a Samsung Intrepid (Sprint) with WM 6.5 stock on it. I grabbed a copy of EPST and put on the device. When launched, it asks for the MSL code, so I enter my MSL, but it continues to say invalid code.
I have verified I can get into the ##DEBUG# menu using the MSL number, and I can also get into the phone number programming by hitting ##MSLNUM#. Any ideas why EPST is giving the invalid lock code message?
Thanks for any help!
Got what I wanted taken care of. Since EPST wouldn't work properly, I was able to devise a workaround:
##UPST#
Change the port to: Modem and Diagnostic
Reboot phone.
Fire up QPST configuration dialog.
Add COM port to the config.
Open QPST- should detect the appropriate chipset.
Read from phone.
Update values as you desire. I changed the Slot Cycle Index to 1.
On th System tab I set the below values:
Preferred Mode "Automatic"
Band Preference "Cell Only"
Roam Preference "Automatic"
Sprint only has PCS coverage here and it sucks, so I use this to roam. Maybe this will help someone else.
Hey guys, I have a Desire CDMA that was on US Cellular. They claim that the ESN has been released from their network. I have rooted the phone with no problems. Page Plus was able to add it to their network fine but it just will not activate. Verizon, of course, is no help either. Should I find a stock 2.1 and re-flash?
I see people selling Page Plus Desires so I'm needing to know what I'm missing. I did get a guy on the phone who told me the phone needed to be "Manually Programmed". I also went to a Page Plus dealer and he gave me a DUH look when I asked him about it.
I have also installed CyanogenMod V7.0.0 RC2 without any problems what so ever... I just need to change the Network to Verizon instead of US Cellular.
[Edit] I have found out that I need to change the SID number, anyone know where to do this?
Any ideas would be very helpful!
TIA!!
[Edit] I have also discovered the *#*#4636#*#* trick but the OEM info at the bottom of the screen is grayed out... I dont know if this is where you change the SID #? The ##PROGRAM trick did not work but I have already flashed the CyanogenMod so maybe that is why this didn't work?
[Edit3] I found this but the ##PROGRAM is not working, is there another number to get into programming?
-Tap the Phone Icon and dial ##7764726 then tap phone icon
-SPC Password is 000000 and tap verify
-select User Activation
-Tap MIN Box and delete existing info and add your MIN *
-Enter MDN as well
-Find SID # and input it here **
-Press Done to save info an return to user activation and then press Home key and phone should reset after programming
so this does work? and do they give you the numbers you need to enter?
Sick of your Data Disconnecting ? Do You constantly have to find your donor and get data/psw from it in order for 3g DATA to work on your phone ??well no need to do that no more. There are two ways that worked for me and the other I can't post about it here
Connect your phone to QPST and Open Efs Explorer
*****GALAXY PHONES must SEND 16Digit PAssword first Thru DFS and HAVE SPC
*****HTC PHONES ALL YOU NEED is YOUR SPC
Click File and Create a New Directory called "DMU" without quotation of course
drag the 10.key file in that folder https://www.dropbox.com/s/so0cx087lik9v59/10.key
Restart you phone and your data should work.
If that don't work then You need to use DFS to back up your Prl and Dial *228 *********ATTENTION**** dialing *228 is not all that bad, the only thing that changes is your PRL. So go ahead and write your PRL back and you're set
If you need the PRL here is one For Sprint Phones https://www.dropbox.com/s/7gqyyvcmjt20paq/53000%20For%20Sprint%20Phones.prl
Need the Latest one ? get it here ....just look for PRL...or use CTRL+F 65005 (get the sprint one) http://forum.xda-developers.com/showthread.php?t=2270191
The Other Method involve changing ESN#s and MEIDs# that's why I can't really talk about it here..... ( Thats What I was told )
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
Note: I do not provide any support with the use of these codes. The thread is for documentation purposes.
What works:
5689#*993# (HiddenMenu) - Device Testing Menu
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Dial Codes That Don't Work
These are the dial codes that are not working on our model.
##PST#
Reserved
I've reserved this post for any comments I may have about the posts above.
Here is an updated list of what works.
What works:
##27263# Removes any branding (sprint) and resets phone to update branding. (useful if flashing to boost or other carrier) (##BRAND#) Reboots phone.
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
##873283# Updates data profile and configures service - Causes a firmware update check (##UPDATE#) Reboots phone.
##786# Factory reset. Erases everything!!! (##RTN#) Reboots phone.
##3424# Allows Qualcomm Mode while in Charging mode when ADB is disabled. (##DIAG#)
##3282# Data menu allows you to view and edit your provisioning setting if you have your MSL code (##DATA#)
##33284# Network debugging menu. Gives information about network status. ##DEBUG#
l33tlinuxh4x0r said:
Here is an updated list of what works.
Click to expand...
Click to collapse
Thanks, I'll update the op.
thals1992 said:
Thanks, I'll update the op.
Click to expand...
Click to collapse
There is a typo in the op. ##27269# (##BRAND#) should be ##27263# (##BRAND#)
---------- Post added at 09:14 AM ---------- Previous post was at 08:59 AM ----------
Just found another code. ##33284# ##DEBUG#
I'm finding that codes from the G2 that I have work.
https://forum.xda-developers.com/showthread.php?t=2523252
So I have been fooling around with the dialer codes and I still can't figure out how to change the apn settings.... Phone is UICC unlocked and I have my MSL.
Anything Suggestions?
##786# I did this and now my cellphone dont recogbize my sim card. What I need to do? please help
thals1992 said:
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
What works:
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Click to expand...
Click to collapse
##72786# stands for ##SCRTN# which my best guess is sprint carrier return. or in other words carrier settings reset.
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
MrManty said:
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
Click to expand...
Click to collapse
Try taking out the sim card and booting up. Then reinsert the sim card and reboot.
5689#*993# - works for hidden menu
from this post: https://forum.xda-developers.com/showthread.php?t=2523252
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
veshwar said:
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
Click to expand...
Click to collapse
Did you solved it? same problem here!
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Click to expand...
Click to collapse
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
desmataks said:
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
Click to expand...
Click to collapse
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Shortcut master lite works i had the same problem
---------- Post added at 12:58 AM ---------- Previous post was at 12:58 AM ----------
Find global settings and it will turn on data
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Click to expand...
Click to collapse
wtharden said:
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Click to expand...
Click to collapse
Thanks I got it unlocked finally again from sprint...
Other sims are working fine..
When I insert ATT sim card then if network mode is automatic then it shows 3G always and speed is too low tested with speedtest. If I change network mode to LTE-CDMA option then speed test is 4-5mbps but then calling does not work.. When i dial any no with LTE-CDMA mode then it says sim is not valid or there is no sim.
Will ATT not work fully with LTE on automatic mode on sprint LG G6?
Please help.
Thanks in advance.