Develop Bugs

radio update!?

i have jasjar
rom 1.13.53 WWE
radio 1.03.01
protocol 42.36.P8
extRom 1.13.137
thats the newest rom, isnt it!?
as i can see, lots of people talk about radio update 1.04.02 but i cant find it!? I tried at forum links (ftp, universal folder) but there is no anything about radio!!!??
btw what about improvement, 1.03 vs 1.04 ?
regards

There you go
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:

Flashing Radio will loose settings in standard Rom ?
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,

Re: There you go
taiseer999 said:
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Click to expand...
Click to collapse
TNX!

Re: Flashing Radio will loose settings in standard Rom ?
Scotty said:
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Click to expand...
Click to collapse
hmmm, im not sure, cant remember but i think that settings will be saved!

I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.

Hi, Sorry... im posting a newbie question... please ignore if "beneath" you...
Im confused on the "radio" upgrade thing. I mean, is this really the radio that we know of (FM/AM)? Why the need for upgrade? How do i make the radio work then?
Laugh all you want, read all your posts and i still dont get it.

The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.

can i use this to update my orange spv m5000? or is there another version for it..\
cheers

ok i've tried several times now and its not working.....

its not working for my spv m5000 either

ssn04 said:
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
Click to expand...
Click to collapse
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!

Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Click to expand...
Click to collapse
You are welcome. BTW, something like this http://www.dealsonic.com/csdsedifmstr.html would add AM-FM capability to a Jasjar if WM5 drivers are available. Note though that it would seriously truncate battery life.

FYI, the SD-Radio is the older model.
Take a look at the sleeker SD-Radio2...
http://www.c-guys.net/products/sd-radio2.html

Works
Hi,
Tha radio Rom upgrade worked Fine.
No settings have been lost. and I hope some Telphone and bluetooth problems are history now.
Regards,
Bjorn

Benefit of Radio 1.04 over 1.03?
Just got my i-mate jasjar. Wondering about upgrades but it seems to work and if it aint broke, dont fix it!!
For those who have flashed from 1.03 to 1.04, what improvements were there?
Thanx

I just updated my 1.03.00 to 1.04.10 on my Qtek 9000
The biggest improvement is the time from hitting the 'pick-up' button to the connection being established. On the older version, this took about 5-7 seconds.... on new version, this happens instantly.
Maybe it's just me, but i think the sound quality of the phonecall is improved too.

Post deleted as I managed to upgrade the radio stack successfully to 1.04.10
cheers guys

Hello
can some1 please tel me what improvement thet is withn the Radio version 1.04.10.
I've done a rom upgrade on my Xda exec the radio is still 1.04.02.
Is the radio vrsion 1.04.10 compatable with the xda exec.
Please some1 advice.
Thank You
Gigino

i have downloaded: radio_.nbf = radio rom and: MaUpgradeUt_noID.exe
put it in 1 directorie and when i run the exe i get an error can't find ruu.dll
with files do i need to upgrade only the radio and where can i find them, or what am i doing wrong..
i am a newbee
my device is a qtek 9000

Radio 1.06.00 Upgrade

Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...

ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
I understand that you hadn't to hard reset the jasjar after upgrade it with this radio. Please confirm and if is any tricks to apply.
As you can see below, I have radio 1.04.10 installed. Anybody know the differences between these 2 loads?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE

No tricks, no hard reset, just a normal radio upgrade...

Hello
Has anybody tryed this on the Xda Exec?
Regards
Gigino

ncruz said:
No tricks, no hard reset, just a normal radio upgrade...
Click to expand...
Click to collapse
I don't know what pocedure you guys use, because to me happens allways the same... have to hard reset it, upload the original ROM and following it upgrade to the latest radio...
Can somebody explain the complete procedure without having to hard reset it?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE

Where did this version of radio rom come from? Can anybody who has done the upgrade comment on the version? anything better or worse?

gigino said:
...
Has anybody tryed this on the Xda Exec?...
Click to expand...
Click to collapse
I've been using radio: 1.06.00 since Tuesday or Wednesday without problems. Hasn't fixed nor broken anything as far as I can see.
Radio 1.06.00 was issued as part of the recent German MDA update.

[No message]

Yes, ist working, had to do the update several times, like 10x, before it was installed, soft reset ......and.....IT'S ALIVE
thanks

Thanks, ncruz! the radio upgrade on my MDA Pro worked flawlessly on the first attempt. My device information now shows:
ROM version: 1.13.69 WWE
ROM date: 10/12/05
Radio version: 1.06.00
Protocol version: 42.37.P8
ExtROM version: 1.13.162 WWE
I was hoping the radio would solve a couple of issues I've mentioned on this thread:
http://forum.xda-developers.com/viewtopic.php?t=38876
but, unfortunately the wireless manager and bluetooth issues still persist.

Hi,
Removed SD and SIM cards.
However, as with my all Universal previous ROM upgrades (only Radio till now), I got several errors (114; 150;...) till succed. About 15 and long attempts.
Did you experience a similar problem?
Could it be related with device bootloader version (mine is v1.00). Does someone has a newer one?
Between some attempts and errors, I need to 'soft reset' or 'cold boot' in order to get a different error, and finally a succesfull attempt.
I've a Qtek 9000 with a TMN SIM (Portugal) and it works fine after upgrade.
Just in case, I want to give up in future similar operations, does someone knows how to get rid of the bootloader? Does an Hard Reset resolves? Is there any other way?
Error 114: Radio ROM update error
Error 150: ROM upgrade utility error

I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...

Tuningszocske said:
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Click to expand...
Click to collapse
I've noticed 2 times now (with hard resets between) that sometimes when I receive a call, my Contacts open and I can't close them. I can click the Start menu and run another app but then Contacts is brought to the front again. After enough clicking to close Contacts, the upper right corner quickly alternates between "OK" and "X" and I end up having to soft reset.
One thing that I did do differently is that I performed a soft reset prior to O2's extRom installation. Are there any 'fixes' in their extRom that I might need to manually install?
I'm thinking about going back down to 1.04.00 as I didn't have this problem prior. But I'd rather not downgrade.

I'm down?grading to 1.04.10 now....

Re: Radio 1.06.00 Upgrade - borged
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric

Re: Radio 1.06.00 Upgrade - borged
eappel said:
....I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
Eric
Click to expand...
Click to collapse
It's looking for a serial (not available on Universal) or USB connection, so you'll need to connect to "ActiveStink" via USB cable. The "Serial" will normally change to "USB" when you plug USB in.
Unfortunately, I've never tried it with an *un-partnered* device stuck in bootloader mode - hopefully somebody else has.

ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Can u let me know whether i can upgrade on dopod 900 in singapore or this upgrade is restrict to a particular country.
cheers Taurus

can be used for Dopod 900 also...
the radio update is for all models of HTC universals...

Re: Radio 1.06.00 Upgrade - borged
eappel said:
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Click to expand...
Click to collapse
You have to instal complte original ROM, the one that came with the phone,
just conect the phone with usb, start upgrading your phone, and wait for 20 minuts to be done
thats how I manage to fix mine 8)

I Removed the Radio 1.06.00!
I had a lot of problems with Messagin. I losed all my internet account/Configuration, my SMS ....
It was a problem with the Radio 1.06.00"

Ext rom advice for use with AKU3.5

Hello all, I'm on o2 here in Ireland I wish to update my two xda exec's. I have my main phone running an o2 rom. coded as follows
Rom: 1.30.107 WWE
Dated 04/11/06
Radio (costumed to version) 1.14.10 (found on here and works great)
ExtRom: 1.30.162 WWE
Thats my main phone. So I use it every day. Its pretty stable with the odd hang . However I want to update it to a newer AKU (I'd like to do Ivens 3.5 test 2) But want to know the best extRom to use with it. (if its got o2 settings, all the better )
My second phone, is a project phone. Just to mess about on till i decide to sell the other one. I installed Ivan's rom the other day and it seems ok. (I much rather his wireless client) But I did not update the extrom on it. So again I'd like to know the best one to use. Its coded as follows
Rom: 2.60.00 WWE
dated 12/20/06
Radio: 1.14.10
extrom: 1.13.139 WWE
I'd like to get them more up to date. So any thoughts? The phones are used for wireless access, using netfront 3.3, texts, voice calls, movies using TCMP and GPS using Route 66 V7. So really most of what they are used for is an after setup install of programs.

Ok I'm a dumbass, just seen that I dont need anything in the extrom
Soz

Improvement Advices please!

I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?

HTCzar said:
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
Click to expand...
Click to collapse
My personal opinion..do not play with IPL/SPL unless its a die situation...try upgrading radio, i find that some radios are better than others in my device...
Learn how to cook and be a flash junkie...LOL

Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300

Yeah, a better Radio will improve your signal, and also save on battery life. 1.54 is the latest and seems to work well for everyone else i know
Check the hermes wiki links above and you can download it there.

HTCzar said:
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Click to expand...
Click to collapse
Who is your provider?
My stock AT&T radio (1.40) worked good, but i prefer to use higher versions just in case...I dont have any problems with the current one that i am using right now (see signature)

Portugal TMN
I´ve seen those Rom´s for audio upgrade and have researched on how to install them, I think I can make it with sucess. However, I want your opinion on upgrading SPL before the audio update please
"need bootloader version 1.04 to upgrade your radio and ?RadioBootloader version 107 or less"
in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
How can I check this?

I´ve update the SPL to the 2.10 Olipro and the Radio to the latest version.
However, I can´t make 3G calls, any ideias? It wasn´t working before the update either.

radio o depends on ur provider a lot.
i use 1.43 for australia. 1.54 is ltest but it sux in australia.
so get feedback from those in a similar region. 1.16 is gonna be stuffed either way, there r much better versions.
i also use htc released rom for phone os.

Well, I´ve installed the latest radio and now I´m back with the NO GSM message.
i wonder ir this is a problem with my installation, with the radio rom files, or with my PDA?
Any help please

it means u screwed it up n didnt follow instructions, and probably didnt read wiki.
get a new radio version, or do it again n reflash it.
ensure u have the right ipl/spl version n u understand the risks n bricking when u r upgrading radios.
i have completely wiped my device n bricked it doing radios. so re flash a rom of choice, reflash radios and alllow lots of hours redoing it all.
suggest u try just reflash a radio that works for ur region. be prepared to lose everything n hope u have backed it up before u starrted.

I didn´t bricked. I bought it bricked.
I´have been trying for the past week to recover it from a brick. I´ve read every tutorial in this forum, and didn´t screw up.
However, I haven´t yet found a Radio Rom that work´s stable in this MDA in Portugal TMN.
I´ve tried 1.16.00, 1.38, 1.40, 1.57 (both). When with 1.16 it worked for 2 days in a row, however after that the no gms appears once in a while.

Can I upgrade Radio Rom?

Hey guys, I was wondering if I could upgrade the Radio Rom. I tried to find out what my Radio Bootloader was through the WIKI site but could not get the commands to work. All I know is that I have:
Rom Version: Schap's 4.01
Rom Date: 10/03/07
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01W
ExtRom Version: 4.01.20071111
IPL: 1.01
SPL: 1.40.Olipro
I think that I need a newer Radio Rom as that one seems a bit old. The phone takes about 1.5 seconds to come back from sleep when clicking the power button.

You will have no problems upgrading radio. My phone started with 1.16 and is no up to 1.54.

sure, you can update the radio.
i suggest upgrading your IPL/SPL to HardSPL 7 or 9. i am currently using HardSPL 9 (2.60 Olipro), at the very least if you have a corrupted radio flash you will have your system bootable instead of a dead brick.
check out the ftp repository for xda-developers, you will be able to find v7 there (v9 is in the upload folder, but make sure you _only_ use it if you know what you are doing.)

Definitely upgrade SPL first, also do a little reading around, some radio roms work better in some countries than others and better on some network providers.