Related
Hi, i have upgraded my Artemis to meschle's Touch FULL VERSION and noticed that (Start-Settings-System-StorageCard) when there is no MicroSD card inserted, i can't access also the 128MB Flash Drive...but when a MicroSD card is inserted, i can access the 128MB Flash.
Is that normal with WM6? swith WM5?
TIA
Ok after a Hard Reset, that solved the problem. Thanks
da_mayhem said:
Hi, i have upgraded my Artemis to meschle's Touch FULL VERSION and noticed that (Start-Settings-System-StorageCard) when there is no MicroSD card inserted, i can't access also the 128MB Flash Drive...but when a MicroSD card is inserted, i can access the 128MB Flash.
Is that normal with WM6? swith WM5?
TIA
Click to expand...
Click to collapse
It's strange... I had no Flash Drive neither with WM5 nor with WM6 (both original, shipped by HTC).
HI
I have one little problem with microSD card! When I copy some files on card with ActiveSinc or with mobile, speed is 35 Kb/s!!! When I copy the same file with card reader speed is 3-5 Mb/s!!! Is this a problem with my Hermes (AT&T 8525) or with ROM (Shap's 3.60, 4.0, ..., 4.30)? Maybe SDHC driver is problem or something else? Anyone tried some other ROMs?
Are you using vista? I experience the same thing, but only under vista
i am experiencing this as well
using the card reading da speed is very fast
What ROM are you running? Some with SDHC driver?
I am also facing the same problem. I am using vista and Schap's full rom 4.31. Not sure what to do.
At&t 8525
olipro 2.10
I noticed the same - Fixed the problem by using WM5torage and I had write speed
Maybe WM5torage fix the problem when coping from computer to phone (SD) but when I copy from phone to SD card its slow (when I'm recording something with VITO AudioNotes to SD it says that my device is slow and I can't record for a long time)!!! Anyone tried with generic (not custom built) ROM?
Maybe you can use the format of FAT.
This has always been the case when transfering files onto the card via activesync.........just unfortunatly the way the software transfers the files to the device and then to the SD card from there.
As said above, ive overcome the problem with the use of a card reader or using WM5torage.
OK! But my question was is there any way to speed up write speed phone to sd? I always transfer files from my computer with card reader but some PPC programs (VITO Audionotes) are complaining about sd speed and it wouldn't work as they should! Is this problem with SDHC driver or is it device?
Try to change File System cache...
HKLM\System\StorageManager\FATFS\CacheSize
I set CacheSize to 512 and work fine with this settings. Look at this settings in your registry and try to change other parameters.
No! The problem is still there! Something else?
What card are you using ?
Benchmark your memory card with SPB Benchmark or Pocket Mechanic and post here the results..
WM5 Storage on my Schaps 4.22
Ok, I thought I saw WM5 storage in my Rom,, but now that you mention it,,I can't find it (unless it was there on a previous Rom , and not there now). I think ,last time I dug it up by accident, I was asking myself what the hell this SW was used for. So, for speeding up things, how do I use WMstorage to enhance download from PC to SDcard installed on Device? Found WM5Storage through file explorer,,tried it , but can't get my PC to see SDcard..
I would think about the low usb 1.1 speed.
USB 1.1 is slow but not that slow and I am copyng from phone to SD card so this is not a problem and the SD card is also not a problem because i tried few different cards and the result is the same!
When I started the quest to add SD & CF memory to the WM2003SE X50V I thought I was going to max out at 4GB SD & 8GB CF. Since then I've learned a BUNCH but I have some fundimental questions:
- Using WM2003SE with SDHC drivers, what is the usable SDHC memory?
- What is the limit assuming the drivers can handle?
- If I upgrade to WM6 using Maglite's solution,
- Is it correct that WM6 can directly address more SDHC space?
- How much?
- What is the CF limit using WM2003SE or WM6?
- To get larger capacity SD & CF, is it worth the risk/hassle of upgrading from a functioning WM2003SE to WM6 via Maglite method or using another method?
- Are there other solutions to getting more SD or CF memory capacity?
Regognizing that the questions are the quick and easy part, its the answers that are hard ... thanks in advance for your help.
NK
ok wm2003se does not support sdhc cards and the limit of cf cards would be the highest cap. card that you can buy i think and thats for any rom ver.
if you update to wm6 then you will be able to use sdhc cards 4gb and up but if you stay on wm2003se or update to wm5 then you have a limit of 2gb
Does this mean that 2Gb is the maximum capacity for wm2003se for normal SD cards? ie not SDHC?
I have a 4gb card which is detected by the x50v after a reset but once removed and reinserted will not be read until another hard reset.
Is the capacity issue the cause of this problem?
Thanks
Just for informational purposes I have WM6 A03 (Lennys version) loaded onto both of my X51Vs. Installed on my daily unit I have a Adata 16GB CF card and a Adata 16GB SDHC card with access to all of the memory on both cards. But again I have two X51Vs not X50vs
SD has 4GB max capacity. WM2003SE doesn't have SDHC drivers (I couldn't find). WM5.0 for Axim doesn't have original drivers for SDHC, but you can load non-original driver from aximsite, but it supports SDHC up to 4GB. So if you insert SDHC 8GB than you will see this card as 4GB. WM6.0 for example MagLite edition has SDHC drivers and supports all SDHC cards. Enjoy with WM6.0!
If your using 4gb cards on x50v with wm6.1, sure it works, but its 'laggy'.
I went from wm2003 to wm6.1, and it just lost all its snappiness. Had an extremely hard time downgrading back to wm2003. It was excrcuiatingly slow the first time, then had to do it all over again. Encountered the white screen of death(wsod) many a times along the way, and thought I bricked it for good.
Will just have to settle for the 2gb cards on the x50v running wm2003. Its good enough.
WSOD RECOVERY:
Sometimes you need to do a diagnostic reset/recovery, if the unit stops responding.
"Hold the record/power buttons and then push reset(not the wireless)."
It will run through a diagnostic, and clear the ram or something. After that you can flash the downgrade again.
Ah yes, Get the original files from Dell, some of the files out there seem to be corrupt, you need to rename the 'K' files to WM50. Follow on from the tutoials of how to downgrade.
I have an O2 XDA orbit and used to have a 2GB SD card i it which worked fine but I have lost it. I am not looking to buy a new one and the prices have dropped so was thinking about getting a 4 or 8GB card but was wondering if my phone would be able to handle it.
Does anyone know if there is a maximum SD card size we can use in our O2 orbits?
Thanks for your time,
memory
hi,
it supports 4 gb as i have used the same with a 4 gb
a friend of mine uses 8gb, there is a "patch" for it somewhere; dont know the link atm
Obviously the one named wm6 is for wm6, the other is for wm5 (although I think they both work for wm5)
Maximum Storage Card Capacity in O2 Orbit
Hi,
inside my Orbit, a 8GB SHDC card is working. I use the Artemis Touch 4.02 WM6.1 ROM --> the SDHC support is already implemented in this ROM --> no patch needed .
Kind regards,
hqqh
Thanks everyone. I ahve the touch 4.01 so does that have the patch ?
Anthony2oo5 said:
Thanks everyone. I ahve the touch 4.01 so does that have the patch ?
Click to expand...
Click to collapse
Yes it does.
I just put a new Sandisk 8gb micro sd in my Orbit (using Artemis Touch 4.02 WM6.1 ROM) Works fine, shows as 8gb in Total Commander, but on my today screen (if I'm reading it right) it's indicating it's only 3686mb?
Have you formatted your micro sd card yet? If you decide to make sure you format it with fat32 selected.
puredreamz said:
Have you formatted your micro sd card yet? If you decide to make sure you format it with fat32 selected.
Click to expand...
Click to collapse
No. I tried format from my pc card reader but it won't detect it. I didn't try to format in the Orbit (couldn't find the option) I found another screen (storage memory or some such) where it showed as 8gb, just not the today screen.
the micro sd 4g card doesnt work on xda orbit arte 200 wm 5 regardless if its formated to FAT or FAT 32, however 2g works fine. I suppose this is the reason that on websites its written " expandable memory slot" and the value aint mentioned. If theres any way to 'patch ' it to make 4g work on wm5, i'd be curious 2 know.
btw, has any one managed to use the internet via wi fi on xda orbit arte 200 WM5. what has to b done??? mine connects to the wifi, but is unable to browse the internet for an unknown reason.
have you downloaded the sdhc.cab update here on xda???
Will allow upto 8gig(what I use in my partners orbit) may even allow larger but never tried...just do a search...
It works on ALL PPCc and wm based devices...
I use it in my i-mate pda-n (8gig card) and Orbit (standard rom which is partners) but also try a newer rom with 6.5 as is included...
I use sandisk SDHC 8GB more than 2 years and it work perfect , i have wm6.5.
cheers
32 GB MicroSDCard working without problems for a long time. Prerequisite is the sdhc.cab patch for original roms, in current roms it is mostly included.
Regards!
Steve
Can any1 having like for wm 6.5 for o2 xda orbit
???
I have 8gb SDHC microSD which i've used before with my touch dual with no problems.
I installed artemis sdhc.cab but nothing happened...
please help...
xmarkom said:
I have 8gb SDHC microSD which i've used before with my touch dual with no problems.
I installed artemis sdhc.cab but nothing happened...
please help...
Click to expand...
Click to collapse
I have the same problem. I bought myself an 8gb SDHC card, not knowing that my device wouldnt recognize it.
Has anyone, yet, found a way to run sdhc on the HTC Wizard? I saw a lot of comments that this isnt a hardware problem, but software, and still none of them saying an exact way to do it, or if its impossible. ...
I`m using the MSD WM6.5 Rom
;
someone said that one of the ways to enable sdhc on ur device is to install a rom that supports it - is there one for the wiza?
Vik Vasilev said:
I have the same problem. I bought myself an 8gb SDHC card, not knowing that my device wouldnt recognize it.
Has anyone, yet, found a way to run sdhc on the HTC Wizard? I saw a lot of comments that this isnt a hardware problem, but software, and still none of them saying an exact way to do it, or if its impossible. ...
I`m using the MSD WM6.5 Rom
;
someone said that one of the ways to enable sdhc on ur device is to install a rom that supports it - is there one for the wiza?
Click to expand...
Click to collapse
i've found the problem.
It is "hardware" thing, probably sdhc are bigger by ~ 0,5 mm and you must try couple of times to put card the right way.
By the way, you also need Artemis sdhc driver (cab file).