Newbee - need rom update - heeelp - JASJAR, XDA Exec, MDA Pro Software Upgrading

Newbee - need rom update - heeelp
--------------------------------------------------------------------------------
I have a qtek 9000 and I want to update my rom/ruu to the latest and I have searched and downloaded from different ftp sites, but none of the programs I have tried worked so far and I have no clue of which one is the right one for my device.
I have currently these informatons:
At start it says: Imate
Rom version: 1.30.68 WWE
Rom date: 02/08/06
Radio version: 1.09.00
Protocol verion: 42.42.p8
ExtRom version: 1.30.153 WWE
Language english (before it was german, but someone changed it for me)
I think the file name that I need is something called "prodigy" or something.
I would really appreciate it, if someone could help me and at the same time maybe describe to me how and what I should do.
Thanks in advance.

Related

Radio 1.04.02

There is Radio 1.04.02 supplied with O2 XDA Exec upgrade.
it was already provided in the dopod ROM.
This message just for note
I installed this radio version to my Jasjar yesterday and it's working fine with me till now.
I think it's a lot better than the old version.
Regards,
what is dopod
What is the dopod rom. Sorry for being a newbie here.
Hi all,
Please explain to me how to upgrade only radio. I have JasJar with latest version of firmware.
Thank you
Marek
I just installed in my imate JASJAR_WWE_11353_137_10301 the 1.04.02 radio upgrade.
Seems to be working OK, but I question if following the upgrade the cab files from the Extended ROM has to run again as after the installation only had soft reset.
Default_CAB-Shortcut-CDL-04Aug05.CAB
Default_Enable_VT_RTPlugin_0727_2_signed.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_pIE_View.sa.CAB
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Default_Signed_SSD_Shortcut_WWE.sa.CAB
Default_Signed_UNI_CDL_UAProf.sa.CAB
Default_Signed_Version.sa.CAB
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (ATFER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Re: what is dopod
ehabh said:
What is the dopod rom. Sorry for being a newbie here.
Click to expand...
Click to collapse
Actually I don't know what is the dopod rom, all I know is that you can download the latest radio version from the below link.
I downloaded and installed it and it seems to work fine so far.
Battery performance had improved alot after the installation of the new rom.
BT headset had improved as well.
ftp://ftp.xda-developers.com/Universal/
as far as I understood the Dopod Rom is the chinese version of the OS
Wolfgang
mareksuski said:
Hi all,
Please explain to me how to upgrade only radio. I have JasJar with latest version of firmware.
Thank you
Marek
Click to expand...
Click to collapse
Just download the latest radio version from the below mentioned ftp site and flash it to your Jasjar.
You will get an error message in the first time, and then it will be installed correctly in the second time.
After the installtion is complete you will have to hard reset your device.
You can access the ftp site from here:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
At the bottom of the page you will find Universal, and you can click on the universal uploads link.. you will find the radio version there.
Regards,
Hi,
Thanks for an hint but when I click in IE I see folders but no files inside
Marek
mareksuski said:
Hi,
Thanks for an hint but when I click in IE I see folders but no files inside
Marek
Click to expand...
Click to collapse
Just click on the link named "Universal Uploads"
No not click on the link named "Univeral Root"
BetoX said:
I just installed in my imate JASJAR_WWE_11353_137_10301 the 1.04.02 radio upgrade.
Seems to be working OK, but I question if following the upgrade the cab files from the Extended ROM has to run again as after the installation only had soft reset.
Default_CAB-Shortcut-CDL-04Aug05.CAB
Default_Enable_VT_RTPlugin_0727_2_signed.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_pIE_View.sa.CAB
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Default_Signed_SSD_Shortcut_WWE.sa.CAB
Default_Signed_UNI_CDL_UAProf.sa.CAB
Default_Signed_Version.sa.CAB
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (ATFER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Click to expand...
Click to collapse
Your extended rom will be installed again after the hard reset is done.
If you don't want the extended rom to be installed again, just do a softreset immediately after the installation of the main rom is finished so you will get the main rom only installed, and then you can chose which items from the exended rom to be installed and which not to be installed according to your needs.
I would advise you to install the extended rom on the SD card not on the main memory as this will save some space on your storage.
Regards,
khaledelfeki, thanks for your reply.
As I mentioned before, I installed the radio upgrade, and it's working OK, but I haven't hard reset the imate yet as it had soft reset, and didn't asked to do it... You think this is correct and doesn't affect the normal use of the imate as the cab files from the Extended ROM where not re-installed?
If you don't want the extended rom to be installed again, just do a softreset immediately after the installation of the main rom is finished so you will get the main rom only installed, and then you can chose which items from the exended rom to be installed and which not to be installed according to your needs.
Click to expand...
Click to collapse
The next time I hard reset the imate (in a week, for different reasons I have to do it 3 or 4 times), I need any special tool or application to see the cab files on the Extended ROM?
Thanks in advance.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Betox,
I don't know about your extended rom because I'm using the Arabic ROM build and the extended rom differs according to the rom type and language.
So, I don't know whether it is correct or not to use the phone without the extended ROM..... but as far as I know it will never effect the main functions of the device.
SO, the best solution is to install the extended rom on the storage card instead of the main memory.
In my case as an example I installed the whole extended rom except the anti firus software which really effects the device speed.
Also I did not install the skype as it does not work in my place.
Furthermore, I did not install the backgammon as I don't use it.
I installed the whole extended rom otherwise.
Regards,
khaledelfeki, thanks for your prompt reply.
My question is how I can see the Extended ROM (and the cab files inside) after the soft reset just after completing the hard reset? File Explorer is OK or I need a special tool or application?
Also FYI, I suspect that this Radio 1.04.02 drains much more battery done the orignal 1.03.01. Has somebody experienced the same?
Thanks again.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
OK, Try the CAB file attached below.
Regarding the battery issue, In my opinion that the battery performance is better than the original Radio Version.
To be more sure, I need to test it for a couple of days more.
Best regards,
OK, Try the CAB file attached below.
Click to expand...
Click to collapse
I'm sorry, but where is the file?
best regards.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
ExtROMUnlocker(for_WM2005_Only).cab
Click to expand...
Click to collapse
Perfect, I can see it now.
Thanks.
_________________
BetoX
imate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
You're most welcome.
You can check this site as well..... I think it will be useful for you.
http://buzzdev.net
Regards,

What is this - UNI_TMDE_12034_118_10600_Ship?

What is this?
has somebody installed this ROM (UNI_TMDE_12034_118_10600_Ship.exe)
It's here
FTP directory /Uploads/Universal/ROMs/ at ftp.xda-developers.com
ftp://ftp.xda-developers.com/Uploads/Universal/ROMs/
Thanks in advance. BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.06.00 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
http://forum.xda-developers.com/viewtopic.php?t=38499
this is the german version of the new rom. if you like german language on your phone you should use this one. else you have to wait some days. on tmobile site they say that expacting new English ROM version is comming early januari.

Switch German language Vodafone QTEC to English Vodafone

Hi all,
I have an English QTEC from Vodafone - ROM details as below:
ROM version: 1.13.62 WWE
ROM date: 09/29/05
Radio version: 1.04.10
Protocol Version: 42.37.P8
ExtROM Version: 1.13.189 WWE
I also have a German QTEC from Vodafone - ROM details as below:
ROM version: 1.13.56 GER
ROM date: 09/28/05
Radio version: 1.04.10
Protocol Version: 42.37.P8
ExtROM Version: 1.13.163 GER
I know that there have been posts that have been close to this in the forum, and this is my first post, and lastly while I am technical I am not overly technical - so I apologise if I am asking something that has been asked before - I have looked at other posts and still need some advice from you all really.
So my questions are as follows:
1) Can I get the German QTEC from Vodafone converted so it is the same as my English QTEC from Vodafone
2) What is the diffference between the ROM and the Extended ROM - it looks like the extended ROM holds the Vodafone specific stuff but is that right ?
3) I was looking at the WIKI and trying to understand the various upgrades - I really didnt want to post another trail - I pulled off the executable "UNI_QTEK_13077_176_10900_WWE_Ship.exe" and started to run it against the German QTEC thinking this could upgrade the main ROM but it stopped almost immediately with a 120 error because of the Country code. Am I just not understanding the way these ROMs work and need to be flashed?
Many thanks for any help you can provide me with, and apologies for starting a new trail here.
Fixed it
Just to let you guys know I managed to get the QTEC converted over to English. All working great - only thing that I need to do now is to be able to get past the SIMLOCK.
Any ideas here ? I still have the original German IMEI number which is on the box.....
Thanks

How To Convert Chinese To Engilish

I purchased a Tmobile MDA PRO recently in China. The OS is in Chinese; but the manual is in German. It had be flashed from German to Chinese for local market.
Can someone advise me which WWE Rom is suitable for converting to English? Can I use any WWE ROM or must be Tmobile? Below is the info on the set:
ROM version: 1.00.00 WWE
ROM date: 07/21/05
Radio version: 1.06.00
Protocol version: 42.40.P8
ExtRom version: 1.13.134CHT
Thank you in advance
FongSG
Any of the universal one from here
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
will do. You do not need to use the t-mobile specific one.
try this CHT rom it better now , seems you used CHS rom , see link here
http://forum.xda-developers.com/viewtopic.php?t=51086
Hi,
I have done it sucessfully. Thanks.

Looking for DUTCH update of QTEK 2020

Hi,
I have a QTEK 2020 and I bought it online, and/so I can't register it online at the qtek website. My problem is that it has an English OS.
I would like to update the ROM version to a Dutch one, but I don't know how the get one and how to do that. Could someone help me?
My Device:
ROM version: 1.75.00 WWE
Radio version: 1.12.00
Protocol version: 1337.38
ExtROM version: 1.75.103
Thanks!
Eduard
Wrong forum!! you must go to Himalaya section....
cheers
indra9110

Categories

Resources