Develop Bugs

Windows Vista + Rombootloader not working!

ok so im running vista and when i try to use the romupdateutility it errors out. neone have a working ver of romupdate i can use?

Dont try to update ROM under Vista with old update utils!
Some people started update process under Vista but was not able to finish, therefore corrupting the ROM. Apparently a lot of update utilities are not compatible with Vista.

if vista didnt look as nice as it does i wouldnt be using it. thank god i was smart enough to dual boot!

jacob-mda said:
if vista didnt look as nice as it does i wouldnt be using it. thank god i was smart enough to dual boot!
Click to expand...
Click to collapse
Maybe install VMWare on Vista to host an WinXP

Or maybe not install/use vista at all what for?!? Another M$ fatware that instead of running other programs it drains all of the pc resources for itself to provide additional $$$ to M$
P.S. VMWare is a masterpiece.

Does Easysync Pro work with WM6?

I am interested in trying out these new WM6 roms. however, I was wondering if anyone knew if easysync pro will work with WM6.

Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.

bunique said:
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
Click to expand...
Click to collapse
Please - What version are you using?

What version of EasySynch Pro works with Windows Mobile 6?
I'm also interested in using EasySynch Pro to synch my WM6 Device? Bunique, what version of EasySynch Pro are you using?

mine is 4.2.5

Easysync pro works with wm6 since V4.2.2. U have to install to main memory.

trlopes1974 said:
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
Click to expand...
Click to collapse
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.

zzoinks said:
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!

ps. 4.2.5 is a fixpack

trlopes1974 said:
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
Click to expand...
Click to collapse
Thanks for your reply. I found an IBM article outlining 4.2.5 and support for WM6.
Perhaps it was a problem with allowing unsigned apps? I seem to recall a registry hack/cab available to fix that. enable_rapi?
It's a bit of a moot point now since I reverted back to a WM5 rom last night. Maybe I'll try reflashing a WM6 rom and see if i can get it going though a hack...unless of course you'd be willing to send me a copy of 4.2.5, for evaluation purposes.
Thanks!
-Brett.

sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.

trlopes1974 said:
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
Click to expand...
Click to collapse
First off, thanks for the reply. I hope this isn't in the wrong forum... I found this thread through a search and I was hoping it applied to me. I've got a Wizard (Cingular-branded 8125), but I am using WM6 & Easysync Pro.
I still can't get EasySync 4.2.4 to install. I get a series of errors when it's trying to install the cab:
First, "this program uses a file that is no longer supported please obtain an updated version of the program"
Then "unable to launch \windows\xcpcsyncsvr.exe: error 1411"
Finally, it says that it's installed, but it isn't. And Easysync on the PC reports that it can't connect.
Any ideas?
Thanks,
-Brett.

zzoinks said:
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
I'm a IBMer too.

Error [264] : Connection

Hi
when i try to update the phone to HTC HK WM6 rom form Imate WM5 through WMDC 6.1 in vista i get this ERROR [264] : CONNECTION messege.
can somebody please help me here, what am i doing wrong?
iam simply running the exe file and following the steps, i also tried putting it into bootloader mode manually.
thanks

try it on a XP machine... i had similar problems on a XP Media Center computer and had to use a "normal" XP SP2 too

Thanks man
can you tell me what ROM have you upgraded on your phone? which phone? and how is the performance?

You need to change some services in Vista even if I don't actually remember which ones...I did a Google search and I found the solution...Hope this helps

I have schaps 3.30c on my hermes... its fast and stable!

Can't connect P3300 in Windows 7

Hi,
I'm running the beta of Windows 7.
I haven't been able to connect the P3300, it seems it can't find the drivers (in the device manager it says "unknown RNDIS device', or something like that).
The odd thing is that my other phone, a HTC tornado, was instantly recognised.
I'm running WM2k3 on the Tornado and Artemis 4.02 on my Artemis.
Could it be the fact that I have an unofficial ROM that it isn't recognised?
Or are there just not any drivers out yet? (as seen Win7 is a beta)

My htc p3300 is working with windows seven(7000)

So is mine. Did you try to download the Windows Mobile Device Center 6.1 (that is not included in W7)?

Where can I get the beta??
Guys!!!
Where can I get the Windows 7 Beta from???
Is it possible for you to post it here????
I am sure many ppl would like to try it out...
Thanks in advance..
Manoj

windows 7 beta
HERE

The link is for Windows 7 for PC and not Windows 7 Mobile...
spikez93 said:
windows 7 beta
HERE
Click to expand...
Click to collapse

anandus said:
Hi,
I'm running the beta of Windows 7.
I haven't been able to connect the P3300, it seems it can't find the drivers (in the device manager it says "unknown RNDIS device', or something like that).
The odd thing is that my other phone, a HTC tornado, was instantly recognised.
I'm running WM2k3 on the Tornado and Artemis 4.02 on my Artemis.
Could it be the fact that I have an unofficial ROM that it isn't recognised?
Or are there just not any drivers out yet? (as seen Win7 is a beta)
Click to expand...
Click to collapse
No u have to install Windows mobile DevCenter 6.1
When no Icon Appears you must install it again (i had 20 tries till it works)
2. there is no Windows Mobil 7
only windows ser7en
Mfg

Hi guys, just had the same problem earlier but figured it out, too lazy to create another post in here so please read what I did in my blog:
http://www.jeedo.net/howto/windows-mobile-connection-error-on-windows-7/
Hope this helps ^_^

Mobile phone not connecting with Windows 7
mywinmobile said:
Hi guys, just had the same problem earlier but figured it out, too lazy to create another post in here so please read what I did in my blog:
http://www.jeedo.net/howto/windows-mobile-connection-error-on-windows-7/
Hope this helps ^_^
Click to expand...
Click to collapse
I thought I had the same issue, but there was something more... The Windows firewall was blocking my Xperia-1 but not my Tytn-II
Finally it was a port settings in Windows 7. You have to open these ports:
Inbound TCP: 990, 999, 5678, 5721, 26675
Outbound TCP: 990
Outbound UDP: 5679
But because I am lazy and I have a very good configured firewall on my internet connection; I opened all the ports on my firewall for my local network.
Problem solved (it took me two days to find this solution)

[Q] Help rom upgrade

Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!

lukarons said:
Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!
Click to expand...
Click to collapse
Look in the thread and download the updater...
Use you win 7 64bit?

d-two said:
Look in the thread and download the updater...
Use you win 7 64bit?
Click to expand...
Click to collapse
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!

lukarons said:
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!
Click to expand...
Click to collapse
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!

d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
So, I just have to connect the device and run the updater, right?

lukarons said:
So, I just have to connect the device and run the updater, right?
Click to expand...
Click to collapse
Yes, sounds easy, right

d-two said:
Yes, sounds easy, right
Click to expand...
Click to collapse
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?

lukarons said:
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?
Click to expand...
Click to collapse
Go to ->Settings->connection->USB and test different settings!

d-two said:
Go to ->Settings->connection->USB and test different settings!
Click to expand...
Click to collapse
It doesn't work... Windows recognizes a device called "Blue Angel" but can't find its drivers and the Windows Mobile utility of win7 doesn't recognize it...

The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?

great sreye

sabrinah said:
The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?
Click to expand...
Click to collapse
hi did you get it sorted
same here my device is stuck now as well on the m#bootloader .cant do any thing at all after that or cant even get it out of the bootloaader. third today searching the forum any one who can help me out on that
---------- Post added at 02:34 AM ---------- Previous post was at 02:13 AM ----------
d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
hi i got wm 2003 ba . i connected it straight and now m stuck in bootloader any help please .searching every where for it . and i got win 8 64 bit but this happened on win 7 32 bit .

read and try to understand D-Two's how to- it is all written there.
Common posting rule: first search, then read, then search again, read again, and if still nothing found: post
... and for sure you'll get helped.

thanks

?
What for?
btw: i forgot to write it's crucial to tell exactly what you've done before you ran into problems...
Few of us have second sight