Guys/Girls,
My exec does not allow incoming blueooth connections. Ive been trying to send pictures from my Samsung to my exec and everytime i get Connection Failed. Ive tried this with many other phone even the Xda Mini i get the same. Anyone know why? I had this porblem before i upgraded to the new 02 Rom 1.30.107 WWE and Radio Version 1.11.00. Even with this upgrade i cant receive. I can send pics to the Sammy but not back again.
Any help would be much appreciated,
THANKS!
Related
Hi gentlemen,
I have a QTEK 2020 and have a very annoying problem: Every few days my phone loses its connection to the cellular network. When it happens - nothing is seen; everything looks perfectly normal (even shows GSM reception), however no-one can call me. When this happens, I can't initiate outgoing calls either. Only a soft-reset fixes the problem.
I'm using ROM version 1.72.00WWE and Radio 1.17.00.
I saw in this forum that there's a newer Radio version - 1.17 and I was thinking maybe it will solve the problem I have.
However I'm seeing updates to MDA II and XDA II.
Can anyone advise me what to do? Is there an upgrade to QTEK as well? If not - can perhaps someone "compile" a neutral version (no branding)?
And another question - is it possible to upgrade just the Radio?
Any help would be very much appreciated!
Thanks,
Ariel Cattan
When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900
Hi,
Please can you help.
I have an XDA2i and and thinking of Upgrading the ROM to the iMate ROM in order to try and fix the TT5 and GPRS problem of Freezing.
Does anyone know if this iMate ROM actually fixes this issue? This is the only reason why I want to upgrade.
Many Thanks
Lee
Don't Do it
Hey Man,
I have the i-mate but the GPRS problem still the same, i upgraded my device into new ROM 1.12 but they didn't fix it.
i sent them over 10 e-mails a month ago but they didn't answer yet and i think they are not going to.
Regards
same here
I have the xdaiis and cant get tt5 to work tried every version of rom avail for the xdaiis and the imate rom still no joy
I have tried all the simple fixes too
* turning the phone mode on/off
* unclicking the receive all beams in the connections settings
* clicking the gps reset button on the tt5 config screen
so rolled back to tt3
there is a tt5 update available but I have not tried this as yet will let you know how I get on
the I-mate rom did not stop the no sound problem oon incoming/outgoing calls either
cant wait for the xda exec or mda4 to arrive
Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...
First off, THANK YOU to all who contribute here. This site has been ALOT of help.
Question...
I upgraded to WWE 1.42 Rom to have the blackberry...
Problem is now Activesync will and will not sync calendar.
I've read a few posts on going into bb and checking and unchecking pim calendr sync. but even when it does sync, after taken out of the cradle it will delete all calendar entries on the BA.
I've not read any fixes for this, so I am asking the community for help.
Also since upgrading to 1.42, I've noticed a significant lag..
I have SPB 3.0, Phone Alarm, Screen Lock, and an upgraged calendar. all were on prior to upgrade and BB connect.
I'm on US tmobile if that helps, and am recieveing bb emails straight to my phone. Thanks in advance for any help!
I Have exactly the same problem I am on t mobile uk This problem has also only occured since i used the up grade.
I have found the problem i think but dont know how to solve.
I have down graded the phone to the old rom and in the instant email settings there is no Rim Settings. It looks to me as if the Rim setting and MS Sync are fighting for control of the Calander, Which causes the pairing with the pc to be deleted.
So i will stick with the old rom for now although its not as good ie cant get mail alert sound etc.
Anyone have any other ideas please post.
Also one otherthing i have noticed when the phone is in the cradle it cant collect email via blckberry.
Seems t-mobile are no help at all
Thanks for reading this
Merry festive season to you all
excell99a,
does the old rom that you are using have blackberry instant email? if so which one?
Yes it does have instant email
its MDA3_TMUK_v106160_SHIP0307.exe
There is a link in the downloads
You also have to add the Camera2K5_v1 to get the camera to work
This fault has been fixed in the new ROM released yesterday by O2. It has an updated version of the blackberry client.
http://www.my-xda.com/xda2s_soft.html
Sorry
This is for Xda II ?
Will it work for t-mobile MDA III ?
Its for Xda IIs which is HTC blueangel.
You may need to get the t-mobile version (if they have it). At least you know there is a fixed version from RIM so its possbile for t-mobile to release it.
I'll confirm this IS a working rom with WORKING BB Connect!! no more Calendar and Activesync issues!! EVEN after soft resets!! I downgraded from 1.42 to this 1.40, love it!!
I have been unable to load the O2 ROM on to t-mobile UK MDA III. Get country error code
Does anyone know if T-mobile are fixing this or is there an easy way to get the o2 Rom to load