Ipaq rz1710 ROM - Upgrading, Modifying and Unlocking

Please guys, can anyone post an english ROM for my ultracheap ipaq rz1710? HP sux, they don't have roms for 1710 on their site...

vflad said:
Please guys, can anyone post an english ROM for my ultracheap ipaq rz1710? HP sux, they don't have roms for 1710 on their site...
Click to expand...
Click to collapse
I agree

TryOG said:
vflad said:
Please guys, can anyone post an english ROM for my ultracheap ipaq rz1710? HP sux, they don't have roms for 1710 on their site...
Click to expand...
Click to collapse
I agree
Click to expand...
Click to collapse
I have both a UK and US rz1710 with english roms right here - if anyone can find me an EASY step by step guide on how to dump the rom to SD using MTTY etc I'll gladly try it but I cannot be bothered going looking for a method as I am lazy :lol:
Richard

i've extracted the italian rom from my ipaq. it's the italian version 1.00.7 with osimagetool from xda. it works ok! i want a english version to write on my ipaq.it's very simple install xda tools select source device memory (current rom) and destination xxxx.nb1 and then press copy button.connect the ipaq first and start activesync.don't need to start in bootloader mode.

I would be SO freakin' glad if I could get this rom!
It's a matter of life and death

yeah, me too... :?

vflad said:
yeah, me too... :?
Click to expand...
Click to collapse
Well my post asked for an 'easy step by step method' as I have no time to investigate this. You type out a method and provide links to the software I'd and I'll do it but I'm not googling for half arsed methods that don't work...
Richard

Hi guys!
I tried downloading XDATools as it seemed to be a 'one click' ROM dumper, but the link in the WiKi is broken (got error 500) and I didn't find it on the FTP.
If you can provide me with a working download location for this app or another similarly simple method of dumping the ROM I will gladly dump my iPaq ROM for you. (see ROM version in my sig)

ftp://xda:[email protected]/BlueAngel/Tools , and there is xdatools.exe
Thx for helping

Have someone managed to change the 1710 ROM? I'm also looking for an method to do this. vflad wrote that he dumped his ROM. But what's the way to flash the dumped ROM on another IPAQ? Thanks in advance!
I have 2 Ipaqs (both 1710) and want to swap the ROM. I've already tried the "old" method which worked for older Ipaqs (Hyperterminal and SD Card). Therefore I bought an RS232 cable and modified it. I can see the boot messages in Hyperterminal after enabling the bootloader on the RZ1710 but I can't make any commands...
Sorry for my bad english

I've tried the method with OSImageTool. The ROM was dumped successfully. But now I'm at the point I mentioned in my last post.
I can't write back the dumped image to the 1710 ROM
OSImageTool just opens the patched MDA ugrade utility and this utility is saying that something is wrong. I think that this utility won't work on the IPAQ because it was written for an totally different PDA...
After this I tried the method with an SD Card and romupdate.exe (Multi-Port/USB TTY). After enabling the bootloader I can connect to the RZ1710. But I can not make any command. This utility is just hanging after pressing enter or any other key... (it's just like using my rs232 cable and connecting by hyperterminal).
But it's 100% connected to the 1710 and you can see some messages like "<CE-31>".
What's the problem with this device? I'm sitting for many many hours and I'm at the same point. I can't flash back the dumped file
Please help!!

Someone can post a rom for RZ1710 in Italian or at least in English, I need to change the rom to my IPAQ
Ivp

And in french ?
Is there a french rom in download ?

I also need the ipaq rz1710 english or dutch ROM
Hi guys, have you found the ROM in the mean time? I am also searching it.
My cousin wants to plan the building of his house on it, but he has a spanish version. (received from his spanish father in law).
Regards,
Bert

I have found an English ROM version for the RZ1710.
The only problem is that i get an "language incorrect! update cannot continu" error
Does anyone know how to bypass the language control???

Wow I see a lot of people are having trouble with their 1710. It sucks that HP didn't release the ROMs for this device, that would have saved all of us a lot of trouble.
I have this device in Spanish and I want it in English. Does anyone know what would happen if I tried installing the ROMs for a different device, say the iPAQ rx3100 (which almost looks like the 1710)? Would it accept the new ROM or would it turn this device into a mildly expensive paperweight?

_http://4pda.ru/forum/attach/971912/ROM.1.00.05.ENG.rar
password: rz1710
and translate this:
_http://4pda.ru/forum/index.php?showtopic=22310
with google if you want to read more about flashing

English ROM mirror (same file as the link above): _http://rapidshare.com/files/112389620/iPAQ_1710_ENG.zip
Installing the ENGLISH rom on a device with a different language
=================================================================
The iPAQ Update Utility checks the language of your iPAQ against
language of the rom image and if they do not match, it refuses
to continue. To force the rom to install on a non-English device:
1. Identify the language of your device. The iPAQ uses one of these
three-letter codes for language:
ENG
GER
FRA
SPA
PTB
ITA
KOR
JPN
CHS
CHT
2. You will need to edit these two files using a hex-editor.
> iPAQPCSDK.dll
-----------------------------------------------------------------
Go to address C644 and change ENG to one of the three-letter
codes above.
> RUUClientDriver.dll
-----------------------------------------------------------------
Go to address E0FC and change ENG to one of the three-letter
codes above.
3. Run hpRUU.exe and hopefully the rom installation will now
proceed.
Click to expand...
Click to collapse

Worked like a charm and able to upgrade the ROM.
Have used Hex-Workshop for editing the ROM file.

In French
Where can I download the French ROM for the Rz1710 please .
thx

Related

German Qtek 9000 ROM available?

Hello!
The Qtek 9000 is sold in Germany with a ROM dated middle October 2005.
Is this ROM also available for download somewhere?
Unfortunately I couldn't find it yet...
I would like to try it on my MDA Pro! :lol:
Deal!
Hey,
I'm looging to change my Qtek german ROM to an English one.
I'm pretty sure we can find a deal in exchanging our ROMs!
But you need to tell me how to extract and how to reflash afterwards.
If interrested contact me.
The english ROM is here on xda-devs-FTP
But: please before flashing your OS upload the german ROM there!
This would be my very best xmas present
Cheers
Ok for your christmas present!
Hello Cendaryn,
I just need coaching or tutorial for extracting and then flashing the ROMs.
If someone tells me how to extract I will post for sure.
And I need also help to flash the english ROM.
Thank you
Well this is my biggest problem - I know how to flash the ROMs but not how to dump them. But I guess a little search in the forum here will help
Cheers
uni_cdl-me_11238_132_10301_ship.exe ) Is this the Qtek ROm? if its not please show me the direction.
Sorry
Sorry with no tutorial I can't help.
I'm really willing to post the german ROM. But haven't a clue where to start.
Does anybody know?
Thank you.
Dumping the ROM seems to be not easy
this is what I found: [Universal] How to d2s (dump) the ROM
I can't help you because I dont have a Universal (Qtek 9000) but I'm very interested in files of this ROM too!!!
Dumping the ROM seems to be not easy
Well, you say it.
If I look the post you mention I still have no idea where to start ???
I keep on seeking for complete tutorial.
By the way, does anybody know if changing the ROM is also changing the WM language? Or do I have to change separately?
Thank you.
A ROM also includes the WM language.
Maybe this topic helps:
http://forum.xda-developers.com/viewtopic.php?t=36102
Cheers
Near to target ... but ...
Hi,
Thank you for the links, I feel I'm very close to dump the german ROM.
But not done so far.
And I'm becoming impatient because I found the ROM I want to put in place.
Keep on helping me end pray for I resist not to flash the original german ROM. :twisted: :twisted:
Arrgh!
I'm going mad to find how to backup original ROM.
Don't know if I will resist any longer to flash without backup.
Would You please try to run grab_it on your Universal?
This would give us a RAW-ROM-Image.
and i need a file dump (TestWM5) of a German ROM.
but you will need a Storage Card to do this.
German ROM needed ?
Hi all,
just reading through this thread here. I have an original VDA-IV with an unchanged ROM. I am trying to convince myself to upgrade to JasJar or O2, but did not do so yet. Any wish for a dump from me ?
(Have to leave now, but am able to do so tomorrow)
Ruud
yes, yes, yes...
@Ruud Westerhout: view your last Post
I am getting today my german qtek 9000.. But I will flash to wwe Qtek.. I will try to dump the german one first.. But maybe I need a little help..
Alex
Idea
Maybe, we can have it a little easier, because I think, ROM dumping is very difficult and could also be hard to flash on other devices. For MDA compact (HTC Magician) for example, you had to edit the dumped ROM with a binary editor before it worked on other devices. Also, there often were problems with some SD card readers/writers, etc.
The best way would be getting a ROM update from the vendor (e.g Qtek) as a complete EXE-File. This could be flashed on other devices with the maupgrade_noid-Tool from xda developers FTP server.
So, it would be nice of you Qtek users, if you could write an e-mail to Qtek.ch!
They offer updates for Qtek users, but you need to mail your IMEI number. So MDA Pro users are not able to get Qtek updates this way.
I'll do this.. No problem..
Any other requests??
Re: Idea
Manolito said:
Maybe, we can have it a little easier, because I think, ROM dumping is very difficult and could also be hard to flash on other devices. For MDA compact (HTC Magician) for example, you had to edit the dumped ROM with a binary editor before it worked on other devices. Also, there often were problems with some SD card readers/writers, etc.
The best way would be getting a ROM update from the vendor (e.g Qtek) as a complete EXE-File. This could be flashed on other devices with the maupgrade_noid-Tool from xda developers FTP server.
So, it would be nice of you Qtek users, if you could write an e-mail to Qtek.ch!
They offer updates for Qtek users, but you need to mail your IMEI number. So MDA Pro users are not able to get Qtek updates this way.
Click to expand...
Click to collapse
This is the best idea in this thread! So please go on guys
Cheers

New test Qtek rom!

http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=fileinfo&id=114
To download, you need register on this site.
RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe
Engish ROM or someother language
I think this rom is not in english
dont the WWE at the end of it mean world wide english
I don't understand Russian so don't know how to download/register. Can someone who does, upload the test rom to the XDA FTP?
thats the problem im having i tried putting it through google
to see if it would translate the page but said was unable to
display any information
x_jane said:
http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=fileinfo&id=114
To download, you need register on this site.
Click to expand...
Click to collapse
Hey, Mr. X_JANE,
Could you upload it to the XDA DEV FTP?
this is for the prodigy not for Qtek 9000. i downloaded it and tried but it doesn't install on my qtek 9000.
As a matter of fact there are no nbf files in it ?
I will upload it now
Very strange rom... I dont now, is this rom for qtek 9000?
I think, this is not Qtek rom...
There is 1 nbf file which is nk.nbf 72mb when extracted
is anybody brave enough to try it
I try... Not install
It's for the prodigy.
Check the link yourself:
http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=select&id=49
I tried to install but again unsuccessful...
The installation screen shows no ROM version to be upgraded.
When you look at the README note, it uses the WIZARD device so it may be for WIZARD instead.....
This is wizard rom... Mistake admin of site... :?

Help (want) : Samsung i710 / i718 ENG ROM

Anyone can help to make WM6 ROM for Samsung i718
or WM5 ROM
Many many thanks
anyone can dump the ROM for me thanks...........
Any progress? I wanna buy the Chinese version here in TW but desperate would need WEE version ( WM5 is OK)
wm5 wwe version i710! help me!
I have Russian ROM XEGF2 if somebody want.
Look at this: http://www.samsung-events.com/sam/catalogue/appli.htm. Flip through a virtual catalogue to the page 7. You'll see SGH-I710. Look at the features... WM6, camera + flash, etc. I'm shocked...
the flash "front" of this is dumped at ppcwarez.org
it´s made in flash and it seems to work in a lot of HTC´s devices
ucramos said:
the flash "front" of this is dumped at ppcwarez.org
it´s made in flash and it seems to work in a lot of HTC´s devices
Click to expand...
Click to collapse
What does this sentence mean? Please translate this into laymans terms. I have been directed to a fileshare link with an apparent english rom for this phone, but I am sceptical as to whether or not it'll work. See post ;
http://forum.xda-developers.com/showthread.php?t=321084

Upgraded WM6.1 No official To WM6 official ASUS P535 All languages

He made these files recovery, for all those who want to return to his official WM6 ROM after trying an update on WM6, 1.
They are also eligible to recover the Asus P535, in the case that is left hanging in full update and get a brick.
As you can see I have prepared in several languages, and download what you have everything ready to make a Upgrade, the file also includes instructions of the installation process.
If anyone needed any language that is not on the links, simply by asking.
Files modified for restoring Rom Official ASUS P535.
IMPORTANT.
To download Upgraded WM6.1 Asus P535, you must make a payment of 5 Eur.
After making the donation you will be directed to the download page.
ROM Español ESN V4.7.17 Actualizado 2007/08/20 Download from HERE
ROM Portuguese PTG V4.7.19 Actualizado 2007/08/20 Download from HERE
ROM Italy ITA V4.7.17 Actualizado 2007/08/17 Download from HERE
ROM France FRA V4.7.13 Actualizado 2007/08/21 Download from HERE
ROM German GER V4.7.12 Actualizado 2007/08/17 Download from HERE
ROM U.K. WWE V4.7.12 Actualizado 2007/08/29 Download from HERE
ROM Russia RUS V4.7.20 Actualizado 2007/11/12 Download from HERE
ROM Polish PLK V4.7.17 Actualizado 2007/11/12 Download from HERE
Instructions provided by Adamos22,
Thank you for your cooperation.
I hope your comments.
any WWE for australia?
Hello Kerm.
I can only prepares a restorer of Ros officers, who are in official home page ASUS.
If you are not serving the United Kingdom WWE version in English, I say that updating the precise and prepare for you.
mui bueno trabajo...
Hi, i've installed wm6 italian and it work very well...
if you want i can translate better the manual (how to)..
now i'm writing by my italian wm6 rom.
do you know how to put languages to wm6.1??
Thanks a lot..
Gracias para tu trabajo...
Hi Jamilu,
i am from Germany and I would like to restore to WM6.
But your instruction is not translated very good....
What have i to do whith that .pre -file
Could you write an instruction in english?? (with first, second, third ... and so on)
Kind Regards
FranzB
Hi Jamilu,
i am from Germany and I would like to restore to WM6.
But your instruction is not translated very good....
What have i to do whith that .pre -file
Could you write an instruction in english?? (with first, second, third ... and so on)
Kind Regards
FranzB
Click to expand...
Click to collapse
Download the WWE ROM restore UK V4.7.12 Updated 2007/08/29.
Inside there are instructions in English.
If that does not help, effected a mentor for you.
Luck.
JAMILU007 said:
Download the WWE ROM restore UK V4.7.12 Updated 2007/08/29.
Inside there are instructions in English.
If that does not help, effected a mentor for you.
Luck.
Click to expand...
Click to collapse
Hi again,
i already did so.
But i do not understand the english version also. Maybe my 8 years learning english in school was not enough.....
What i do not understand is the following:
3-Formats the MSD to both FAT and copy files to this.
Hmmmm.....
I understand, I do not write good translation that I use a translator.
That means it is more or less as follows,
Formats the MSD to both FAT and copy files to this.
Formarte the mini SD card to FAT, once this formatted copy of the extracted files .RAR to the Mini SD.
I hope that now we understand.
JAMILU007 said:
I understand, I do not write good translation that I use a translator.
That means it is more or less as follows,
Formats the MSD to both FAT and copy files to this.
Formarte the mini SD card to FAT, once this formatted copy of the extracted files .RAR to the Mini SD.
I hope that now we understand.
Click to expand...
Click to collapse
Ok....
I did so.. now there is a white window with "ASUSP535 FlashROM Update" and "SD download" ...... but nothing happens. My 4GB SD Card was already formatted with Fat. I copied the two files into root of SD-Card. I did not format new. Is this wrong? Must the MSD be formatted, so there is no other file on this card??
Kind Regards and thanks
FranzB
Try it with the Mini SD 512 who came with the ASUS.
This has to work.
JAMILU007 said:
Try it with the Mini SD 512 who came with the ASUS.
This has to work.
Click to expand...
Click to collapse
Yes. Finally it works with my 2 GB SD Card, after unlocking LangID !!! Thank you very much. Maybe this conversation is helpful for other German Users too.
Thanks again for your good work.
Kind Regards
FranzB
Thank you for your interest in him.
JAMILU007 said:
Thank you for your interest in him.
Click to expand...
Click to collapse
One more problem:
I have to configure my Network Settings (Vodafone, Wap and so on)
But when I open this feature, there is nothing. Is there a "Network Wizard" for that or something similar??
FranzB said:
One more problem:
I have to configure my Network Settings (Vodafone, Wap and so on)
But when I open this feature, there is nothing. Is there a "Network Wizard" for that or something similar??
Click to expand...
Click to collapse
But this problem is eliminated if returned to his official ASUS ROM.
If the problem is that now has a WM6.1 Rom, remove and install the ROM 19400. You can download it HERE.
This ROM has a self-configuration of networks of all telephone companies.
I hope you will help.
JAMILU007 said:
But this problem is eliminated if returned to his official ASUS ROM.
If the problem is that now has a WM6.1 Rom, remove and install the ROM 19400. You can download it HERE.
This ROM has a self-configuration of networks of all telephone companies.
I hope you will help.
Click to expand...
Click to collapse
ok. of course. But i need a utility now for WM6, because now i have my original(?) Rom on my P535.
As far as I can see if it has worked and has been able to restore the return to his official ROM, congratulations.
The issue to me says I will not be able to help much, I can think of only searching on google to find out the parameters to be put to set the phone with Vodafone.
Let us hope that some companion read this and you can help me more than I do.
Sorry.
JAMILU007 said:
As far as I can see if it has worked and has been able to restore the return to his official ROM, congratulations.
The issue to me says I will not be able to help much, I can think of only searching on google to find out the parameters to be put to set the phone with Vodafone.
Let us hope that some companion read this and you can help me more than I do.
Sorry.
Click to expand...
Click to collapse
Ok. Thanks again very much. I finish for today. Maybe I find the correct settings by Google.
As fas as I can see, everything else works fine like before.
Kind Regards
FranzB
P535 WM6.1 for Eastern Europe - WWE_EE
Could you be so kind and make WWE_EE version 6.1? Now I have ROM version v4.7.12 WWE_EE00 and Extended ROM v. V1.3.0 EE00...
Also I'm intrested in this:
WWE_EE version 6.1?
I have also: ROM vers. v4.7.12 WWE_EE00 and Extended ROM v. V1.3.0 EE00
Seccond: can any1 take the camera driver from the rom. Maybe we can improve something in camera driver also. If someoane cand take apart the driver from ROM... I can look inside of it..
@FranzB: I had the same Problem. So I just installed the original Asus Update after restoring with JAMILU007´s Rom. And Now everything is fine!!!
So many Thanks for this "Romdowngrade".

Need help with my Toshiba Portege G810...

Hi,
I bought this phone in Taiwan without thinking too much of it. The pre-installed Windows Mobile 6.1 is in Chinese - that's fine. But I cannot believe that it doesn't let me change it to an English system...! My friend's HTC Touch lets him do that. How's that possible? I thought changing language would be one of the fundamental functions?
Anyway, does anyone know if I can ever change my Windows from Chinese to English? And how I would do it, if there were ways of doing it?
Thanks...!
Can anyone help...?
the language is located in the rom and flashing it with an english rom should make it english
dont know anything about flashing toshibas myself though
If you dump the rom, probably one of the talented people that frequent xda-developers could help you.
btprice2001 said:
If you dump the rom, probably one of the talented people that frequent xda-developers could help you.
Click to expand...
Click to collapse
what do you mean by "dumping" the rom...?
i guess the portege g810 is just not popular enough for people to develop anything for it... maybe i just need to wait...
From the wiki: "The ROM holds the Operating system and other components such as the bluetooth and wifi stacks. The ROM is accompanied by the Radio, Ext_ROM, SPL and IPL."
Basically if you dump the ROM from your device, the language files can be changed, and then you could re-flash the modified ROM to your device. I'm not sure how to do all of that, but there are many people here that do know. I believe the first step would be to dump the ROM from your device. Please see the following thread:
http://forum.xda-developers.com/showthread.php?t=334680
btprice2001 said:
From the wiki: "The ROM holds the Operating system and other components such as the bluetooth and wifi stacks. The ROM is accompanied by the Radio, Ext_ROM, SPL and IPL."
Basically if you dump the ROM from your device, the language files can be changed, and then you could re-flash the modified ROM to your device. I'm not sure how to do all of that, but there are many people here that do know. I believe the first step would be to dump the ROM from your device. Please see the following thread:
http://forum.xda-developers.com/showthread.php?t=334680
Click to expand...
Click to collapse
thanx! one more question - this thread you posted is for Kaiser - does it also apply to Portege? so would it be ok for me to flash my portege with HTC/Kaiser roms?
katsudon said:
thanx! one more question - this thread you posted is for Kaiser - does it also apply to Portege? so would it be ok for me to flash my portege with HTC/Kaiser roms?
Click to expand...
Click to collapse
NO!!! That would ruin your device. I posted a link to that thread because it contained instruction for dumping a ROM. You can only flash your Portege G810 with Portege G810 ROMS. That's why you'd have to dump the ROM from your own device, modify it, and then flash it back to your device
katsudon said:
Hi,
I bought this phone in Taiwan without thinking too much of it. The pre-installed Windows Mobile 6.1 is in Chinese - that's fine. But I cannot believe that it doesn't let me change it to an English system...! My friend's HTC Touch lets him do that. How's that possible? I thought changing language would be one of the fundamental functions?
Anyway, does anyone know if I can ever change my Windows from Chinese to English? And how I would do it, if there were ways of doing it?
Thanks...!
Click to expand...
Click to collapse
Please dump the device, and upload the rom somewhere and provide link here plz.
Does anyone know where I can get the English WM6.1 ROM for the Toshiba G810 ?
I also brought the Chinese version Any help appreciated
zipspeak said:
Does anyone know where I can get the English WM6.1 ROM for the Toshiba G810 ?
I also brought the Chinese version Any help appreciated
Click to expand...
Click to collapse
Hi. First you must try to dump the ROM and upload it somewhere (share it with XDA. I guess some of the masters are looking for the G810 rom).
Try to follow the steps described here:
http://forum.xda-developers.com/showthread.php?t=334680
or
http://forum.xda-developers.com/showthread.php?t=238945
For translating the rom to another language i read somewhere here a post that help you throug. I'll try to find it later on.
Sorry for may bad english. I'm a little rusty!
Cheers,
Draco
zipspeak said:
Does anyone know where I can get the English WM6.1 ROM for the Toshiba G810 ?
I also brought the Chinese version Any help appreciated
Click to expand...
Click to collapse
Are you able to dump this rom please?
zipspeak said:
Does anyone know where I can get the English WM6.1 ROM for the Toshiba G810 ?
I also brought the Chinese version Any help appreciated
Click to expand...
Click to collapse
can you dump tis rom or provide a few files from it for development please?
Maybe I can help... I own a Toshiba G810 with Portuguese WM 6.1
I'm a bit confused with the instructions for dumping...
I'll read it more carefull and I'll make the dump
Is this the easiest way to make the dump? http://forum.xda-developers.com/showthread.php?t=238945
I know this forum is dedicated to Qtek/HTC stuff, but if you guys can do any development for the G810 it would be great
English ROM in HK is available for download !
http://www.toshiba.co.jp/product/etsg/cmt/english/asian/g810/g810_rom.htm
anyone knows how we can flash the English ROM over the Chinese version? I tried it but the update software checks the language and stopped me moving forward.
Any method to flash it from the SD card? I have got the flash.bin from the EXE file downloaded at the official site.
chanklb said:
anyone knows how we can flash the English ROM over the Chinese version? I tried it but the update software checks the language and stopped me moving forward.
Any method to flash it from the SD card? I have got the flash.bin from the EXE file downloaded at the official site.
Click to expand...
Click to collapse
Here is what i've done with successfully flash.
...Anyway HK English ROM that i mentioned in my previous post is not actually English ROM.
As far as i know,It's Chinese rom with English Keyboard...
1.Download the DSUU that can be flash to your G810.
2.Download the DSUU that u want to flash to your G810.
3.During run DSUU,go to \windows\temp on your PC,grab FLASH.BIN of each DSUU.
4.use Ultraedit open FLASH.BIN in hex mode,change the first line of the file from 2. to the same
as FLASH.BIN from 1.
5.you are now ready to flash your G810,during running DSUU in 1. after it extract stuffs to \windows\temp
just copy modified FLASH.BIN overwrite it.
6.wait until everything complete, Done!
i'm now waiting for FLASH.BIN from English ROM...Anyone Could help would be appreciate.
i already contact toshiba support in Europe but seems like they just want to sell only the phone.
i 'm now having this Chinese brick and promise to myself not to deal with toshiba product again.
And finally,
Merry Christmas Toshiba.
It works and I have my device on English ROM now ! Very well done teddyking!
I need the same but in Spanish
I ask you for help in order to install in my Toshiba G810 the Spanish ROM of Windows Mobile 6.1. I do not have the file to install and also I do not know the procedure for doing this one.

Categories

Resources