Related
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
If you can source the vibrate motor for an HTC S710 I would be forever grateful. Where abouts are you located?
EDIT: I see you're in Phoenix.
Most of the parts I carry are for US released HTC phones but often they carry simular parts. If you can post a picture of what it looks like I'll see if I have a match.
I will upload a picture in a little bit, however here are the specifications from the HTC Vox Service Manual for the motor;
JT0406-30CSR1, JNTECH, Cylindrical, 3V, 100mA, 12000+/-3000 rpm, 60/-, 20degC, 11.2*5.1*5.8mm
The cylinder has J7D05 printed on it and has 2 prongs that make contact to the pad on the PCB. I've tried many different other motors but none of them physically fit in the spot. So if you have any motor rated to those specs and is smaller or equal to the dimensions above, I will take it.
Here are two pictures of it. They are quite large, so not inlined. Not my camera, one of those funky digital ones that I have no idea how to adjust the focus on.
http://i25.tinypic.com/20psxg3.jpg
http://i25.tinypic.com/22dcb4.jpg
I'll check my inventory tomorrow. The shop is closed for today, it being the 4th of July and all.
Ah yes. Thanks, I shall await your response in great excitement.
Happy Indie Day!
A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!
@pna
I had the same problem with my Dash/Excalibur. I had to turn off the USB charging feature in the settings and then the data worked fine. I just either turn it back on if I need to charge via USB on my PC and don't have a wall charger handy. Tell your friend to try that.
Edit:
Also Turn off Advanced Network Functionality to along with charging over USB.
pna said:
A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!
Click to expand...
Click to collapse
If the pins in the socket look straight re-flow the solder on the mainboard or get someone to do it. It's fairly easy. New sockets are about $4 on fleabay but as there are multiple lines close together you do need skill to replace.
M.S
@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.
Planetneo said:
@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.
Click to expand...
Click to collapse
I do, however, stock them. pm me and I'll list it on eBay.I'm in the UK though so shipping will be dependant on where you are. Outside UK is £7.
M.S
Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.
Planetneo said:
Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.
Click to expand...
Click to collapse
Help if asked, yes. Spam to get sales, NO.
M.S
Anyway you can check out my thread here...http://forum.xda-developers.com/showthread.php?t=405758
Might find it intresting.
htc touch cruise
One of the give aways in buying this product is CoPilot Live 7 with free city map. I choose Muscat in Oman in English but I can not activate it. I went to the dealer but he wants me to pay to activate it.
Planetneo said:
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
Click to expand...
Click to collapse
Right on! I have been wanting to replace the metal bezel that goes around the front of the AT&T 8525 (U.S. HTC Hemes). Mine has gotten quite scratched and scuffed over the last year, and I would love to have it returned to it's original clean, shiny look.
Do you happen to carry this part by any chance? Or know of an affordable place to obtain one?
I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Planetneo said:
I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
If you need the full housing email Amit / Raki Computers and ask - they have them as well at not much more $ ( about $26 IIRC) if you ask although the parts they sell are used / stripped from BER phones so some have minor marks and it's pot luck.
M.S
edit - I emailed Amit @ Raki myself anyway and he's listed the full housings here: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220254094906
better value IMO.
Yes. We've got software support and now hardware support. This thread needs to be stickied.
Has anyone happend to know if this is available for samsung vibrant
http://cgi.ebay.ca/Mini-bluetooth-keyboard-comes-iPHONE-4-pouch-/220652949736?pt=AU_MobilePhoneAccessories
i hope it does exist.. cuz this would be an amazing buy.. since i like to type alotta emails and play games.. that require physical keys...
thanx
i found this and it states "Manufacturer Specifications - Android 1.6 and above "
so maybe
http://cgi.ebay.co.uk/Small-Mini-Bl...104903&cguid=3cf23ed812a0a0a9e8e22d02fff31fb6
and its cheaper here http://www.need4it.co.uk/63-mini-bluetooth-keyboard.html
Any idea if these actually work? These look clean
Sent from my SGH-T959 using XDA App
well i'm aware of these deals...
but the link i gave had a pouch especially made for iphone and the keyboard together.. so its easier to operate on the go... and have the option to take it out whenever u need to...
so i guess my question now is.. is there a pouch for 4" smartphones with an additional pouch for any of these bluetooth kekyboards?
I've been trying to get an Apple BT keyboard to work with the Vibrant, but no go yet. It was working with a G1. I'll get back on that project next week.
I bought one becasue i have multiple uses for a device like this
It does not work as is...maybe a software fix needed
oh you bought which?
Mini Bluetooth Keyboard??
what u mean it doesn't work as is?
wouldn't it be better if there was a pouch to keep both of them ...
i'm looking for a pouch with two slots...u should too.. it'll make it alot easier to handle keyboard on the go!!
In the I9000 forum room some one said it won't work for the same reason there wii remote doesn't work ...some thing about hid
Sent from my T-Mobile G1 using XDA App
I saw a very beautiful one at Amazon, discounted for less than $10. (See attachments 1 and 2 below )
I'm looking for one for my HTC Touch Cruise (P3650). I know that there was a pouch for the 'Freedom Slim Bluetooth Keyboard' that's discontinued now (See attachment 3)
Do you know where I can find it? Thanks
sareen said:
In the I9000 forum room some one said it won't work for the same reason there wii remote doesn't work ...some thing about hid
Sent from my T-Mobile G1 using XDA App
Click to expand...
Click to collapse
ahhh.. crap! i remember hearing about the wiimote.. makes sense.. Bluetooth 3.0 became a curse after all!!
Gaya said:
I saw a very beautiful one at Amazon, discounted for less than $10. (See attachments 1 and 2 below )
I'm looking for one for my HTC Touch Cruise (P3650). I know that there was a pouch for the 'Freedom Slim Bluetooth Keyboard' that's discontinued now (See attachment 3)
Do you know where I can find it? Thanks
Click to expand...
Click to collapse
sorry, no idea where to find that..
but if your phone can somewhat fit into an iphone leather case...
then this might work for you..
Samsung Vibrant Does NOT Support HID
Hey everyone,
I've been looking for Bluetooth controllers and Keyboards for the Samsung Vibrant (T-Mobile). According to my research the ITON Mini Bluetooth Keyboard uses a Bluetooth driver called HID to communicate with other devices.
The Samsung Vibrant does NOT support HID. This means the ITON Mini Keyboard will NOT work with the Vibrant.
However.... there may be a work around. BlueInput (Google it) is a HID Driver sold on the Android market for $10.00. So in theory... ITON Mini Keyboard + BlueInput Driver + Vibrant = Working Solution.
However, I've read many post about the BlueImput Driver which state, it doesn't work on the Vibrant.
The only other options are to wait for the Vibrant to get Android 2.2 or a custom Cyanogen ROM which supports HID.
I flashed teamwhiskey's Onyx rom (froyo with touchwiz software removed and black theme) and my bluetooth keyboard (uses HID) works flawlessly. The rom has been completely stable so far and has a lot of other features, so if you guys are up to it you may just want to flash to froyo rather than buying unproven software.
SHOW US!
theodork said:
I flashed teamwhiskey's Onyx rom (froyo with touchwiz software removed and black theme) and my bluetooth keyboard (uses HID) works flawlessly. The rom has been completely stable so far and has a lot of other features, so if you guys are up to it you may just want to flash to froyo rather than buying unproven software.
Click to expand...
Click to collapse
Can you please post a YouTube video of your accomplishment? I would love to flash my Vibrant with a new Rom but I've only used Cyanogen Mod. I've never heard of TeamWhiskey and am hesitant to take a risk. I really don't want to brick my phone.
kr00lplatinum said:
Can you please post a YouTube video of your accomplishment? I would love to flash my Vibrant with a new Rom but I've only used Cyanogen Mod. I've never heard of TeamWhiskey and am hesitant to take a risk. I really don't want to brick my phone.
Click to expand...
Click to collapse
You don't have to take my word for it, check out the vibrant development forum. Team whiskey's roms, along with eugenes macnut roms, are possibly the most popular and well respected roms available for vibrant at this time.
I've checked them out and they seem legit. I'm interested in flashing Onyx but I need my swype keyboard. Do you know if it's painless to have my cake and eat it too?
I've also seen that there is a front facing camera jack for the vibrant... Very interested in that as well
Sent from my SGH-T959 using XDA App
theodork said:
You don't have to take my word for it, check out the vibrant development forum. Team whiskey's roms, along with eugenes macnut roms, are possibly the most popular and well respected roms available for vibrant at this time.
Click to expand...
Click to collapse
Correct. I just paired a Sony Wireless Keypad for the PS3 to this Vibrant running Macnut v12! Just go to Wireless settings, Bluetooth, make device discoverable, power up the keypad by pressing the left blue button before powering the device, pair devices, and type whatever pin number the phone asks you to type on the keypad. It took me a few times to go through it but I am amazed that it works while the phone is being charged.
Now see if I can pair the keypad again after I power it down?
At least you can find this keypad almost anywhere Playstation 3 accessories are sold.
Sent from my GT-I9000 using XDA App
Cheapest here. http://www.dealextreme.com/details.dx/sku.45604
USD vs GBP posted earlier.
anyone out there try the LiveView with the vibrant yet, and if so, how do you like it? I'm thinking about getting one, looks like a cool little toy, but i've herd some negatives about connetion issues (yes i know they just recent released a fireware update to help that) but still unsure if it's worth it.
Thanks in advance!
well i just got it, and it's pretty bomb in case any of u 203 visitors wanted to know lol
What is it?
Sent from my SGH-T959 using Tapatalk
Its a bluetooth connected display that you wear on your wrist. It will give you a lot of information at a glance. I guess it would be great for someone who hates pulling their phone out all the time, or someone who uses a belt clip or armband case.
sgtmedeiros said:
What is it?
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
http://www.sonyericsson.com/cws/products/accessories/overview/liveview
Neat concept, but the review I saw showed major problems. I'd like to see another in-depth review, post-update.
-bZj
that looks incredibly useful...i want one
down8 said:
http://www.sonyericsson.com/cws/products/accessories/overview/liveview
Neat concept, but the review I saw showed major problems. I'd like to see another in-depth review, post-update.
-bZj
Click to expand...
Click to collapse
they put out an update for the software that makes it pretty usefull. there is also a hack with tasker to help it connect when it disconnects.
it does disconnect sometimes, but for the most part it works really well. If you are on xda and hack your phone then you know the software isn't always perfect and if you have delt with roms that arn't quit ready for daily driver you know the feeling and it isn't that bad.
I'm loving this so far, and want more people to get it so that more people would devolop plugins for it.
it is coming to the US soon, or u can get it on ebay for about 70 bucks! get it now before they get to the us and become hot and the price on ebay skyrockets!
down8 said:
http://www.sonyericsson.com/cws/products/accessories/overview/liveview
Neat concept, but the review I saw showed major problems. I'd like to see another in-depth review, post-update.
-bZj
Click to expand...
Click to collapse
I'm at work right now so will post an in-depth review if i can tonight...gotta go see the gf and play star craft before i go, and try and go shopping...lol but I will try
Anyone got a nice reliable place to get stickers for the back of the xoom? There was a thread before (now closed) about them but I had them "shipped twice" and never received anything at all.... looking for an ONLINE store perhaps with real nice ones.
like a big ANDROID (green) would be cool
MitchRapp said:
Anyone got a nice reliable place to get stickers for the back of the xoom? There was a thread before (now closed) about them but I had them "shipped twice" and never received anything at all.... looking for an ONLINE store perhaps with real nice ones.
like a big ANDROID (green) would be cool
Click to expand...
Click to collapse
http://shop.ebay.com/i.html?_nkw=an...41/i.html?_nkw=android+stickers&_arr=1&_rdc=1
Ebay is where I have gotten all of mine. Just choose the size/style you like and enjoy.
The place I got mine from seems to have disappeared, but here's an option that may seem obvious in hindsight: the Google store*. But they come in a big variety pack, so you can't just buy one sticker from them.
*I would post a link, but I'm apparently too new here for that.
I've ordered twice from here and they are quick. High quality too. I have one on my car's rear window, one for my Xoom case and one for the Xoom itself.
http://www.androidstickers.com
thanks guys... sucks I ordered some from an xda member and never got them... waiting for my paypal refund! Thread got locked too...
or go right to the source, google;
http://www.googlestore.com/Accessories/Pack+of+16+Individual+Android+Stickers.axd
MitchRapp said:
thanks guys... sucks I ordered some from an xda member and never got them... waiting for my paypal refund! Thread got locked too...
Click to expand...
Click to collapse
those stickers looked pretty good, too had i had to file a dispute with paypal . . .
thanks flippingout for the link!
I'd like to see a nice HHGTTG sticker or skin. Isn't that the real reason we like our tabs?? Just like having our own Guide.
Sent from my Xoom using XDA Premium App
flippingout said:
I've ordered twice from here and they are quick. High quality too. I have one on my car's rear window, one for my Xoom case and one for the Xoom itself.
http://www.androidstickers.com
Click to expand...
Click to collapse
Thanks for the link, these look awesome. My N1 and Xoom 'bout to get some sticker love. Just trying to decide between green or white for my Xoom.
Sent from my Xoom using XDA Premium App
aww Andy eating an Apple... cute!
zonk7ate9 said:
Thanks for the link, these look awesome. My N1 and Xoom 'bout to get some sticker love. Just trying to decide between green or white for my Xoom.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
i have the blue honeycomb logo on mine (from androidstickers.com), it looks pretty good
There's some available on eBay as well.
if anyone is interested in custom vinyl stickers for their tablet, I do them as a hobby/small business. My site isdub dub dub dot redcossack dot com.
Found this on thingyverse. Prints in about 6hours on a Makerbot. Really nice. The person who designed this also figured out the correct center of mass and it's very stable and hard to knock over. Sorry if I missed that somebody already posted this (I could not find it here).
That is really cool, thanks! Getting quotes from the local 3D printers. Can I ask how much you paid for yours to be made?
shag_on_e said:
That is really cool, thanks! Getting quotes from the local 3D printers. Can I ask how much you paid for yours to be made?
Click to expand...
Click to collapse
I didn't pay for mine. Just used a printer at work with some extra feed-stock material sitting around. The tricky part was to get all the support material off. I can't imagine this will be cheap. Similar items go for $25 at Amazon. It's much easier to print this one: http: / / www.thingiverse.com/thing:1383100
derausgewanderte said:
I didn't pay for mine. Just used a printer at work with some extra feed-stock material sitting around. The tricky part was to get all the support material off. I can't imagine this will be cheap. Similar items go for $25 at Amazon. It's much easier to print this one: http: / / www.thingiverse.com/thing:1383100
Click to expand...
Click to collapse
I do not have access to a 3d printer and I would like to know if you know where I can buy one of these stands. This looks cool and functional!
Sent from my SM-G935T using XDA-Developers mobile app
OuncE718 said:
I do not have access to a 3d printer and I would like to know if you know where I can buy one of these stands. This looks cool and functional!
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
sorry, I did not come across any seller on ebay or amazon who'd sell this.
I'd like this also. Can I send someone money that can print one?
CCJ22 said:
I'd like this also. Can I send someone money that can print one?
Click to expand...
Click to collapse
There are local print shops emerging in a lot of places, maybe one in your area. Just take your design to the shop and have it printed or print it yourself.
That will eliminate shipping costs as well , which can be high depending on how far it has to go.
Is there a link to the printer files for the original stand pictured? Am I completely blind? I'd love to donate to that person and get that stand printed!!
Edit: https://www.thingiverse.com/thing:1306057 yeah.. I'll remember to look better next time >_<
never mind, wrong thread
Just got my printed stand in the mail from my friend today! Fits like a glove! Balances well, attaches to charge wonderfully. I am beyond stoked right now.
Funny, I just got my Huawei watch today and 3d printing a stand was my first thought as I plan to use a metal band and the stock charger wouldn't be very accommodating for that. Then I came here and saw this thread.
3D printing it in wood right now, will post pictures when it's done.
Well I rushed the post processing (staining and painting) because I'm heading out for the holidays and wanted to at least get something done. Still wet. I'll probably re-do it in the new year and make it completely smooth and more wood like.
Looking good!
Anyone know of any services in the UK that might be able to print this for me?