Related
hi
can anyone point me in the direction of the download for this rom - i keep seeing it in people's sigs and i'm jealous
cheers
si
A newer version of the radio stack is not necessarily better than the older one. For example, several members in the UK find 1.09 works better than 1.11
I don't know where the 1.12 radio stack is, but the 1.11 is available here: ftp://ftp.xda-developers.com/Universal/Radio
1.11 radio problems
I have had strange probems with 1.11, including loss of signal & inability to dial in places where there is a signal. Only starts working again after a soft reset. Its intermittent but reason enough to go back to the QTEK ROM with radio 1.09.
1.11 radio problems
I have had strange probems with 1.11, including loss of signal & inability to dial in places where there is a signal. Only starts working again after a soft reset. Its intermittent but reason enough to go back to the QTEK ROM with radio 1.09.
I have a feeling that it depends on where you use your phone...
I had the same probs with droping calls where the phone worked before in the UK with 1.11 going to try 1.10 for a bit.
How To Upgrade MDA PRO from Chinese to English
Hi,
I just bought a T-Mobile MDA PRO in China but it is in Chinese. Can some one advise me which WWE ROM I should use in order not to cause the system hang after upgrade? Can I upgrade WWE ROM from other brand? I got the following info from the set:
ROM version: 1.00.00WWE
Radio version: 1.06.00
Protocol version: 42.40.P8
ExtROM version: 1.13.134 CHT
Thank your in advace
FongSG
fongsg: Go for the Qtek AKU2 ROM 1.30.77 1.30.176 1.09.00 WWE.
It is one of the few ROMs which have AKU2 as well as A2DP for Bluetooth. It's quite fast and stable as well. The radio ROM is also very stable - apparently better than the 1.11 stack.
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
kanjer said:
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
Click to expand...
Click to collapse
Try 1.09. It seems to be the most popular radio stack at the moment.
richardlai said:
kanjer said:
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
Click to expand...
Click to collapse
Try 1.09. It seems to be the most popular radio stack at the moment.
Click to expand...
Click to collapse
what about RADIO 1.10 from T-mobile ???
1.10 gives me the best reception (in the Netherlands)
I'm having problems with 1.09 in the US I drop my GPRS and calls fail all the time. I am upgrading to 1.11 to see if this helps.
1.11 is REALLY bad in the UK on o2, bad signal, and once lost it is impossible to get back, have to switch off radio and then back on to get the signal back. That's my experience anyway, 1.09 is the best I have used so far, very strong signal and very stable
Using an O2 XDA Exec with Radio 1.09 in Asia [Manila, Philippines] any other Universal users who have updated to Radio 1.11? How is it? Does it perform better compared to 1.09? I am unsure if I should update my Radio to 1.11, some posts here say 1.11 is unstable for their territory but I would like some info on 1.11 radio ussage in Asia. TIA.
No problems here using 1.11. Been using it for about 1 month. Portugal territory
bnycastro said:
Using an O2 XDA Exec with Radio 1.09 in Asia [Manila, Philippines] any other Universal users who have updated to Radio 1.11? How is it? Does it perform better compared to 1.09? I am unsure if I should update my Radio to 1.11, some posts here say 1.11 is unstable for their territory but I would like some info on 1.11 radio ussage in Asia. TIA.
Click to expand...
Click to collapse
also have the XDA Exec here in Manila and I have tried 1.11. Went back to 1.09 as it seems to give me better reception
@herbules: Many thanks for the info I'll probably stay with 1.09, may I ask which operator you are on? I am on Globe and their UMTS coverage sucks.
bnycastro said:
@herbules: Many thanks for the info I'll probably stay with 1.09, may I ask which operator you are on? I am on Globe and their UMTS coverage sucks.
Click to expand...
Click to collapse
yup...Globe UMTS really sucks, I also tried my Smart line on the Exec and UMTS was almost flawless, except I couldn't get my real player to play streaming vids smoothly
Hey guys,
Where I could download a stable Qtek 9000 ROM which is best in HK and Manila...?
Thanks :wink:
Found on buzzdev.net
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=24437&catid=40 8)
does anyone know new ROM from Orange release 25 August 06.....??
any link....??
Here we go with this new - ROM -
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1142943309969
I understand that upgrades to radio 1.13, but what's about the rest of the version, i mean rom and so on?
thanks.
I'd also want to know what is new in this ROM aside from the radio. Does this ROM have both AKU2 and A2DP support?
Does upgrading to 1.13 on the radio make much of a difference?
In an area where I used to get a 5 bar signal strength on the alpine with radio 1.04 I now get a 2 bar signal with the Universal and my wife complains bitterly that the sound breaks up whilst I'm talking to her...
G
gquipster said:
Does upgrading to 1.13 on the radio make much of a difference?
In an area where I used to get a 5 bar signal strength on the alpine with radio 1.04 I now get a 2 bar signal with the Universal and my wife complains bitterly that the sound breaks up whilst I'm talking to her...
G
Click to expand...
Click to collapse
It is hard to answer your question because different radio versions have different performances on different locations. So you basically have to try it yourself to determine if this will improve the quality of your calls in your area. The most important thing to know is you will not loose your current settings or programs installed as long as you ONLY UPGRADE THE RADIO VERSION AND STAY AWAY FROM UPGRADING THE REST OF THE ROM.
Thanks will give it a whirl - iirc its a case of deleting the nk.nbf and ms_.nbf files out of the upgrade?
G
gquipster said:
Thanks will give it a whirl - iirc its a case of deleting the nk.nbf and ms_.nbf files out of the upgrade?
G
Click to expand...
Click to collapse
Yes, and using the Ma_Upgarde_No_ID Tool to install it. I'll probably try and install it too myself today.
I think it's time that some informed people start telling the rest of us what's changing from version to the following: personal impressions on perfomance are often contraddictory, many are downgrading after upgrading. What's going on?
Gah now I'm annoyed.
I applied just the radio update and at the end when it told me to do a cold start I did just a normal soft reset, fingers well away from the keyboard. It starts to boot and I notice from the splash screen that it's QVGA instead of VGA as I expect. I think "Oh OK I just need to run ozVGA again it's just got reset by the update" - all of a sudden it tells me to "Tap the screen to begin using Windows"
Not amused.
Fortunately I kept a backup but that's really annoyed me.
G
gquipster said:
Fortunately I kept a backup but that's really annoyed me.
G
Click to expand...
Click to collapse
excuse my ignorance (cause it's really buggin me too! ) but how do you backup the EXEC? on previous PPC's there was a backup to falsh utility. all i've seen are references to backing up 'my documents'. i would like to have a full backup like i used to get.
any help appreciated.
nevermind "Spb backup" it is!
hi gquipster
did you see any difference in the radio upgrade??
i am also having a little reception difficulty with radio 1.09 sometimes 5 bars and couple of minutes later in the same location no reception so any feedback will be appreciated. thanks
Backups:
When I say a backup what I meant is that all the cab files etc that I use are all stored on the SD card so it was just a case of rerunning them rather than having to dig them all out. Also all my files are kept on my SD card as well.
I see they've removed the backup option from ActiveSync 4.2 anyone know why that would be?
Radio 1.13:
Well I haven't really noticed much difference in the signal strength indicator on the screen but call quality whilst sat at my desk seems the same - perhaps slightly better. It does seem to be answering calls marginally quicker but that could be wishful thinking.
Real test will be as I drive home this evening, several areas where the phone broke up yesterday where my Alpine didn't so see how the new Radio performs there.
I actually didn't use the no_id upgrade tool I re-encoded the radio_.nbf file changing the operator id to O2 and then used the ROMUpgradeUt.exe etc from the last official O2 update just with the nk.nbf and ms_.nbf files removed. Maybe that's why it hard reset my phone? Not entirely sure.
Anyway if there is anyone with a debugger/decompiler/whatever who can analyse exactly what the changes between Radio 1.09/1.11 and 1.13 are I'd be very interested, I'm wondering if it's actually the same update just with a different version number depending upon the service provider!!!
G
Did someone above mention that this rom makes the screen qvga? I would be interested in that, as long as it doesn't screw up my phone software (like it does with ozVGA). Just to get a clear picture, how good is this upgrade, if anyone has anything to offer from experience, when compared with Imate JJ 1.30.82 WWE and 1.09.00 (radio) I am using on my universal (O2 xda exec).
i applied the radio rom to the qtek rom. no problems - no qvga
Device Information :
Operator version : 7.130.1.174 <---- NEW info...What it is..?
ROM Version : 1.30.90 WWE
ROM date : 02/24/06
Radio version : 1.13.00
Protocol version : 42.47.P8
ExtROM version : 1.30.174 WWE
OS 5.1.195 (Build 14847.2.0.0) ----> AKU 2.0 (nothing new)
i think this is same with previous orange ROM, the new one ONLY Radio 1.13.00 updated, and have NO issue with new radio, everything seem OK..!
will be revert back to AKU3.2_Ivan and keep this radio...
I got QVGA cos I think I fscked up the update and it ended up cold booting my system. Haven't yet looked at exactly what I did wrong yet, might do if I get a chance after work this evening.
My current config now is:
ROM Version: 1.30.107 WWE
ROM Date: 04/11/06
Radio Version: 1.13.00
Protocol Version: 42.47.P8
ExtROM Version: 1.30.162 WWE
OS 5.1.195 (Build 14847.2.0.0)
Notice you have a different ExtROM version to me - what exactly is different do you know?
I'm off on holiday as of tomorrow so may not get much of a chance to reply for a week or so (depending upon how many emails I get in my work account by the time I get back!!!)
G
Is there A2DP support in this new ROM?
Radio 1.13
Seemed slightly better whilst driving home today my wife didn't complain about me breaking up as much but she did say that it still wasn't as good quality as the "that other gadgetty thing you used to have" (Alpine).
Also for the first time this evening it detected a 3G signal in my house (0 bars but it detected it!!!) for all of 5 minutes before switching back to a 5 bar GSM signal. Will try moving it nearer to a window and see if I can get the 3G signal back, but thats a definite improvement.
Anyway all subjective I'm afraid as I don't have the expertise and/or the tools to be able to do proper testing.
Still need to figure out exactly what I'm doing with cooking ROMs etc first...
G
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
HTCzar said:
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
Click to expand...
Click to collapse
My personal opinion..do not play with IPL/SPL unless its a die situation...try upgrading radio, i find that some radios are better than others in my device...
Learn how to cook and be a flash junkie...LOL
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Yeah, a better Radio will improve your signal, and also save on battery life. 1.54 is the latest and seems to work well for everyone else i know
Check the hermes wiki links above and you can download it there.
HTCzar said:
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Click to expand...
Click to collapse
Who is your provider?
My stock AT&T radio (1.40) worked good, but i prefer to use higher versions just in case...I dont have any problems with the current one that i am using right now (see signature)
Portugal TMN
I´ve seen those Rom´s for audio upgrade and have researched on how to install them, I think I can make it with sucess. However, I want your opinion on upgrading SPL before the audio update please
"need bootloader version 1.04 to upgrade your radio and ?RadioBootloader version 107 or less"
in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
How can I check this?
I´ve update the SPL to the 2.10 Olipro and the Radio to the latest version.
However, I can´t make 3G calls, any ideias? It wasn´t working before the update either.
radio o depends on ur provider a lot.
i use 1.43 for australia. 1.54 is ltest but it sux in australia.
so get feedback from those in a similar region. 1.16 is gonna be stuffed either way, there r much better versions.
i also use htc released rom for phone os.
Well, I´ve installed the latest radio and now I´m back with the NO GSM message.
i wonder ir this is a problem with my installation, with the radio rom files, or with my PDA?
Any help please
it means u screwed it up n didnt follow instructions, and probably didnt read wiki.
get a new radio version, or do it again n reflash it.
ensure u have the right ipl/spl version n u understand the risks n bricking when u r upgrading radios.
i have completely wiped my device n bricked it doing radios. so re flash a rom of choice, reflash radios and alllow lots of hours redoing it all.
suggest u try just reflash a radio that works for ur region. be prepared to lose everything n hope u have backed it up before u starrted.
I didn´t bricked. I bought it bricked.
I´have been trying for the past week to recover it from a brick. I´ve read every tutorial in this forum, and didn´t screw up.
However, I haven´t yet found a Radio Rom that work´s stable in this MDA in Portugal TMN.
I´ve tried 1.16.00, 1.38, 1.40, 1.57 (both). When with 1.16 it worked for 2 days in a row, however after that the no gms appears once in a while.
When I got my replacement AT&T 8525, it came with the AT&T WM5 ROM. I decided to downgrade to the Cingular WM5 version since I didn't like the AT&T one. I've been skeptical about upgrading to the official WM6 release, and I figured that since I have some time tonight that I would. However, I do have a couple of questions about how this will work since I had to install a different bootloader in order to make the change back to the Cingular WM5 version possible.
Currently my settings are:
ROM version: 1.34.502.1
ROM date: 09/21/06
Radio version: 1.40.30.00
HardSPLv7
My question are, do I need to modify my radio version before I upgrade? Also, should I modify my bootloader before I upgrade to the official WM6? Thanks.
Firstly good job on flashing HardSPL.
your radio doesnt need to be changed at all, but if you want to take a peek at my tests here that might help you choose an appropriate radio version.
For WM6 DEFINATLY go for it, the updated stacks/drivers/kernel are definatly faster than the WM5 versions.
Give the pandora naked 7 ROM a shot........it will FLY.
Your settings can be restored for AT&T using the HTC network wizard (easily found with a search).......and make sure you backup all your contacts etc... using PIMBackup (in the development forum).
I keep getting an error 264 connection error saying that the update utility cannot connect to my phone. I've followed all the steps. I'm not sure what I'm doing wrong. The only thing that sparks my mind that I don't remember occuring before is that when I plug my phone in via USB ActiveSync automatically begins, so I wasn't sure if I needed to disable that function or not since the instructions mentioned something about being sure that happens before installing the new ROM.
Any help? I'm still stuck here.
I just did mine (I am a brand new to all this) and I followed these steps word for word in this thread, adn man what a difference .
read these all the way through.
http://www.pocketpcaddict.com/forum...-unlocking-cid-unlocking-wm6-your-8525-a.html
http://www.mrvanx.org/cms/index.php?option=com_content&task=category§ionid=6&id=13&Itemid=26
Nates good people and willing to help although he is a caffeine addict
and after you upgrade the rom do this, but read it all before doing so
HTC plug in , great look for the 8525
http://www.pocketpcaddict.com/forum...ome-plug.html?highlight=HTC+Home+plug-in+v1.0
Oh i forgot, the HTC att WM6 included the radio upgrade to the 1.48. which works great.