Related
My most new annoying experience...
Everytime I delete some files from ExtROM that I don't want to install in the event of an hardreset, they reappear again after a softreseting the device. :twisted:
Even powering the device down, and waitting more than 10secs, as several times suggested in this forum.
Maybe a silly question, but any ideas to overcome this?
Don't tell me the only way is to coock a new .nbf Extended ROM!?
It is? :?
have you try formatting the extended storage? i used resco file explorer to format it after unlock the extended rom storage.
No I didn't format, as I wanted to delete just some files.
Should I Format?
And then?
- reflash the ExtROM .nbf, and delete unwanted files?
or
- just copy the ones I want to keep?
Also realized that extra files copied into, disappear after softreset :evil:
This thing seems to have own life...
Nothing of these behaviours were happening with previous ExtROM form Qtek (1.13.151 WWE).
Is it a different philosophy between Qtek and i-mate, for ExtROM?
Why these different behaviours?
Conchas said:
No I didn't format, as I wanted to delete just some files.
Should I Format?
And then?
- reflash the ExtROM .nbf, and delete unwanted files?
or
- just copy the ones I want to keep?
Click to expand...
Click to collapse
well... i have no experience in reflashing the ExtROM.nbf, so i prefer the second option, it worked on me , sorry can't much help
see my comments on the following thread..maybe that will help..
http://forum.xda-developers.com/viewtopic.php?p=240962#240962
eagle 1 said:
see my comments on the following thread..maybe that will help..
http://forum.xda-developers.com/viewtopic.php?p=240962#240962
Click to expand...
Click to collapse
Thanks for the hint. It worked!
Finally I think that I got the complete picture.
All difficulties to unlock Ext ROM on this new i-mate ROM, and a comment at another thread, made me think that once unlocked, it wouldn't be needed to repeat it again after further Hardresets. Changing the Reg settings accordingly, would be enough (WRONG!).
Silly conclusion... in fact Ext ROM was visible, but still protected.
The mommentary ability to delete and add files, leaded o a false confirmation that every thing was ok.
Now I can delete and add files to Ext ROM without problems!
Thanks all, the moved me to the rigth track.
Well after a hard reset this time I did not run the un-locker cab again, just changed the registry values. I have deleted a number of cabs, and installed two programs to the space freed by deleting the cabs. I've turned my device off for a couple of hours, and did a soft reset. So far this time my ExtROM is still there, as are my programs.
Granted this is not what I expected to occur.
dah54 said:
Well after a hard reset this time I did not run the un-locker cab again, just changed the registry values. I have deleted a number of cabs, and installed two programs to the space freed by deleting the cabs. I've turned my device off for a couple of hours, and did a soft reset. So far this time my ExtROM is still there, as are my programs.
Granted this is not what I expected to occur.
Click to expand...
Click to collapse
Realy strange...
That were also these comments which caused my confusion before. Now I don't know what to think anymore :?
But will follow only the procedure that works for me.
Unlocking ExtROM on this ROM, turnned to be a really tricky procedure.
For me it only works if I enter the Reg settings manually...
Any attempt to insert them with a Cab file turns into failure to unlock ExtROM. Independent if I run the unlock tool before or after, followed by a softreset :evil:
You have to edit the "Config" file.
Hi all, i have problem with extrom. I cant find solution for long time. I would like use extrom as normal disk, that means i would like to install programs on it and modify files on it.
I normaly do it, but big problem is after reset, when my files are replaced by original files from ext rom.
I tried many roms a same like dopod 900 aku 2.6 dont do it(after reset my files staied ext rom). I dont know where is the problem, mayby somehere in registry.
I dont know, where is original files backup. because i delete all files from extrom and tried find some of them in windows directory,no was there.But after soft reset original files are still here.
Please help
I would like to second the motion for this request. I do so with the full understanding that this question is already discussed in the forum. However, the threads are soooo long and contain information that is often conflicting. I have already followed along and tried several different methods of effecting this exact result. In the end, I have the EXT ROM area visible, but I cannot rid it of the O2 files and open it for use like the iPAQ File Store I used to have in my previous device.
Again, I apologize for requesting this information that already exists, but a definitive How To would be greatly appreciated.
Thank you for your consideration...and more importantly, all of the hard work put into the site!
you need to both UNHIDE (make it visable) and UNLOCK it...that is you need 2 cabs to do this
Thank you; I understand that I need to both unhide and unlock this area. I have attempted this several times in several ways with several tools/executables...
good, now is ok. Before i used only extunhider. Now i run ext rom unlocker and it is ok
So, some of you have this error, some dont. So lets try and figure it out. Heres what we know.
The problem affects ALL Artemis WM6 ROMS.
Remember, the issue doesnt appear when just using it normally. Its only under certain circumstances. Heres how you re-create the problem.
Run Tomtom, this causes the error90% of the time.
Create a new word document and try to save anywhere.
Heres my setup and what ive tried to fix it.
Device: MDA Compact III
SD Card: 1gb
Ive tried font cache size, system cache, removing the memory card.
Please dont post "I dont get the error" if you havnt tried running tomtom or saving a word document.
Thanks
To add to the problem re-creation, I was trying to copy a directory with around 15 files in it from the internal memory to the storage card, the message just kept popping up for all the duration of the copy process, I stoppped clicking ok eventually. I looked at the free program mempry available then and it was pretty good at around 22mb.
Device: Orbit XDA
SD Card: 1gb
I too have noticed that looking at the free storage space seems to fix it for tomtom (but not word). There is something else wrong with Excel in that the "Save As" is in the wrong place, infact where it is isnt actually save as.
You're right, I haven't noticed this before with excel. I can't remember if it was like this before, was it? It won't be easy figuring this little memory issue out. I hope someone has a trick up their sleeves.
I have the WM6 emulator running on my pc and the excel thing isnt there. Comparing the registry settings on the emulator with my device. I would love to hear if anyone does actually have Word working without issue.
BREAKTHROUGH!
OK. I installed the original Orbit rom and... IT WORKS!!!! So the question is what did bepe and the guys do when they de-branded it? The orbit rom has an Ext-Rom with a load of branded stuff PLUS! some patches. I bet one of these patches fixes the issue!
These custom roms have NO Ext-Rom at all, hence the increased storage space. however in the process of removing the ext rom they have managed to cause these memory errors.
So guys, any chance of a rom close to the Orbit rom but with the English language and Ext rom left in tack?
Great work mate, it is the removal/merging of the extended rom that's causing the problem then. Maybe it's not even a patch in the extended rom, maybe it's the way the extended rom was merged that's causing it. This surely deserves more looking into.
Great breakthrough
Word FIX!
Thanks to pvdhelm for the tip on this one. Attached is a patch to fix the memory issue with word (and only word). To fix it for other apps you need to view the memory in the control panel and click on "Storage Card". The word fix is pernament but the other memory issue it only until you reset your phone.
Absolutely brilliant, so it looks like missing registry entries!! We need to find out what was in the original extended rom then to find out if we're missing anything else. Looks like only me and you here, you should post this fix in the main threads mate.
Cheers and well done.
I have a copy of the rom, tried isntalling it all but to no avail. It looks like on boot up the system thinks it has a different ammount of ram due to the ext rom being merged. By displaying the ammount of storage it realises it has a different ammount and fixes it. Until the next reboot. So if anyone knows what changes when you view the storage that may be fixing it I would love to know.
Or if somone can make a rom with the ext rom still in place.
EDIT: Heres one just for the MDA Compact III without WiFi users. It applys the Word memory errror fix but also fixes the Comm Manager issue and does so just for the MDA as it removes WiFi from the list.
Maybe this is a clue for you all. I have never had these errors, ands I use Tomtom daily and have tested word for you again with no fault.
The difference? Well I upgraded to WM6.0 the original way before USPL patch and flashed the OS only. I'm assuming you with problems used the ROM installer method. Am I right with my assumption? If so that should narrow down the culprit.
I used Bepes original WM6 WWE OS only upgrade, therefore the Ext ROM on my device is still the old T-Mobile WM5 one and was simply not allowed to run. So it can't be right to assume there is something missing from an EXT ROM patch.
It's most certainly the extended rom being merged then, there's nothing else to it.
gajet, can you give me the exact steps you took. I went from the T-Mobile rom to Black and blue then to the others. I uses USPL first though.
Can you give me a quick set of steps you took i.e Original T-Mobile rom, then ran USPL, then updated to Bepes.
Also, if you used bepe's can you also tell me which rom update util you used? as the one ive tried has errors at the end.
Thanks
dannyoneill said:
I have a copy of the rom, tried isntalling it all but to no avail. It looks like on boot up the system thinks it has a different ammount of ram due to the ext rom being merged. By displaying the ammount of storage it realises it has a different ammount and fixes it. Until the next reboot. So if anyone knows what changes when you view the storage that may be fixing it I would love to know.
Or if somone can make a rom with the ext rom still in place.
EDIT: Heres one just for the MDA Compact III without WiFi users. It applys the Word memory errror fix but also fixes the Comm Manager issue and does so just for the MDA as it removes WiFi from the list.
Click to expand...
Click to collapse
VERY interesting reading!
If you move this thread, please drop a link on here for us, thanks. The first one to crack this problem will be worshipped from afar I am sure!!
I think it could be an order of upgrade issue, heres the latest.
1. Downgraded to T-Mobile WM5 rom
2. Ran USPL
3. Upgraded to Bepe WM6 using the EXE version
The word issue is no longer there but the out of memory in Tomtom is. Also no ext rom.
It would be good to know from others and gajet what steps they took and which files they uses to do it. Especially as gajet still has his extended rom.
I've tried:
official t-mobile wm5 to german wm6 to bepe uspl &
official t-mobile wm5 to bepe uspl
Both times I have had the error with tomtom but no problems with word.
Both times temp fix (looking at storage) worked (sorry about font cache red herring - thought I was onto something there).
Just tied chi-tai extended battery plugin with the storage showing on the homepage (as a way to force system to get correct memory) but no joy.
I have htc touch com manager and phone skin but not the home plugin.
Cheers
Matt
I think Ive cracked it. Just doing some final testing but watch out for a new "How to" thread.
go Danny go.
Look forward to seeing it.
Will test and report back once you've posted.
Cheers
Matt
Sadly the original thread was edited to reflect the OS update was repackaged but eddie2k still goes on the reexplain the process in this thread.
eddie2k said:
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..
ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
Click to expand...
Click to collapse
Now I didn't bother installing the german O2 release as my MDACIII was CID locked, so I just used ARTE package with Bepes WM6 .nb renamed and flashed the OS only, then after hard resetting, at the point of about to load EXT ROM soft reset.
This thread was also the guide although you could skip the process of extracting the .os from a ROM package as Bepe originally provided us with the raw windows.nb file.
Thanks gajet, Ive just posted the steps. Your post was deffinatly the key. Once I saw you still had your ext rom I knew we could do it.
Answer is here
http://forum.xda-developers.com/showthread.php?t=313486
Hey I want to add in a extrom for the first time on my siemens sx66. I read all the instructions and everything on the wiki. But they tell me I need a unlocker tool for it. I tried to find every link possible for it, but they all give me an error so Iam guessing there dead. Can anyone post up a new one please.
here you are, the unlocker and the repart doc
Thank you so much, appreciate it.
Okay, I downgraded back to wm2003, made it so total storage is 60mb. Now I upgraded back to wm6.5 explode. So now I just unhide, unlock and then just copy the extrom zip file to the extended_rom file???
Actually, I was reading another post of yours, and I remember you saying to put the /extrom folder in a sd card?? I dont remember reading that in the wiki. But anyways you think you could provide me with instructions on how to do that. I have the sd card.
by resizing the old extrom folder to (probably) 128kb, as suggested in the wiki, you don't have the old space to park the extrom, still the sd card has an autorun, as you might have experienced before, if for example there is a folder 2577 on the card, whatever is in there runs, when the card is inserted, but don't mind about that, just an example.
you have a file extrom.zip or something comparable, just unpack it and put it on the sd card, so that it shows EXTROM\ with a bunch of cabs in there and a cfg.txt, an autorun.exe and a picture custom.bmp.
- the autorun.exe is what executes the entire thing when inserted
- the cfg.txt holds the config, meaning it describes what happens there, there is a list of cabs in there, and how to process them,
- the cabs are the installation files of the programs to be installed, if you are uncertain, whether you need each one of them, maybe googling the name helps you determine that.
- the custom.bmp is the picture showing while installing the extrom and so rather uninteresting for you.
remember to make sure, the list of cab files in the folder is the same as listed in the cfg.txt, having it downloaded and extracted that is the case by default, but if you want to customize it, remember that simply copying the files into the folder is not enough, they need to be listed in the cfg.
i personally for example remove the adobe reader and arcsoft mms from extrom and put own apps in there.
every program in there is installed to the system storage, so make sure you don't stuff your device with to many apps that maybe you don't need.
Yay it worked!! Hey thanks alot for the help, didnt think it be so simple. Anyways, thanks again.
Heh I wrote this on my BA, more reasons to love this thing.
Hey ya'll, I have a simple question.
I want to know if I can flash the ext rom from another HTC device onto my BA ext rom?
I just installed the 142 Tmo Uk rom, and was curious if I can grab the ext rom off of another Tmo USA device, so I have all the right settings and stuff?
TIA!
i wouldn't think so. may be able to do it, i wouldn't attempt it. i stripped my extrom, they don't actually have anything useful in them. just horrible themes and bad software.
you however could probably extract the extended rom from another device and copy the files and manually install them. that'd be easy enough i think.
yeah, flashing a rom from another device is not such a good idea, but since you are using wm2003, you can visit -=this tutorial=- and gain another 16mb of storage space and then just copy cabs that you want to the device or maybe even build you own extrom, to be copied to the sd card and installed automatically. to find out how that is done (actually pretty easy!) just use forum search and look for "cfg.txt" and Chef_Tony. i wrote some pretty long tutorials about that.
basicly it is just making an automated install routine for your most commonly used programs, so whenever you hard reset your device, the programs YOU want are installed, not those ridiculous t-mobile customizations, their pink dialer skin and things like that.
EDIT: btw. you should never take an entire extrom of another device. you never know, if maybe some of the things installed by the extrom are dependant of the display resolution or use device specific interfaces or mess around with device specific hardware buttons or drivers, you should extract the cabs and google their names, if you are not sure, what that actually does, so you can be sure, it will work on your blueangel!
have fun with that.
and @cerjam: don't be offended, your answer is completely right, i agree, just wanted to add a few little things
Perfect answers!
So, chef_tony, your telling me that it's ok to merge my extrom and storage in wm2003se? and then copy my cabs and write a cfg.txt of my own for an sd card?
I realize that I should do all the reading, but I'm the kinda guy who needs a generalized big picture before I start ripping apart all the details, so I'm looking for **** and jane/oversimplified answers.
Thanks, guys (and gals, if you are one)