Hello people...for sometimes i ´ve been in this forum and let me say this is very useful, even for the ones that don´t know nothing at the begining like myself...
well i made a reset....but after that i have a problem in button lock option...when i select "lock all buttons excepet power button" after a while, my BA stops responding...it doesn´t turn on!?!??!?
can you help me?
Oscar
Related
Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
I've used an iPaq 6515 in the past, I've used a Blue Angel, HTC Wizard and Hermes, and pretty much the first thing I always do when I get a new phone is enable "lock all buttons except power button" so the power button is the only button that can wake up the phone. All my previous devices have had that option. I hate when the phone turns on when I press any key. That's retarded.
So I went to enable that on a brand new Dash that I just got and the option isn't there! Start > settings > system > button > lock > "lock all buttons except power button" IS NOT THERE. Actually, the entire "button" menu is no longer present.
Anyway, my question is: how do I do this? Reg hack? 3rd party app? I want to turn the display on and off with the power button. The only thing the "power button" is good for is bringing up a wireless and profiles menu, and turning off the phone completely. Such as it is the power button is not actually capable of turning the display on and off. I wish I could meet the guy who made that decision so I can ask him this: DUDE! WHAT THE HELL WERE YOU THINKING?!
So I have to keep the keypad always locked because any slightest bump causes the Dash to wake up and place random calls or send random e-mail. I can't believe someone somewhere thought this was a good idea.
Settle down there tiger. You're comparing PPC to SP, or apples to oranges. See the Z key??? Yeah the one with the little lock on it. I wonder what would happen if you held that down? Also try holding down the hang-up button.
I wish I could meet the guy didn't RTFM and ask him: DUDE! WHAT THE HELL WERE YOU THINKING?!
Please read my post again. I know how to lock the keypad. That's not what I'm asking about.
Lock all Buttons Except Power Button
I don't know about your system, but on mine, I go to The settings tab and then the "Key Lock" icon. That's where I found "Lock all buttons except Power button".
Hope this helps.
Hi
Whenever I press the power button on my BA, it hard-resets. So I lost everything on WM2003.
Upgrading to WM6 meant that the only thing I lost was the time, but it's still really annoying!
Any help anyone can give here would be great!
Edit: I've used the search tool, and apart from one similar unresolved issue where the green button caused a hard-reset, there doesn't seem to be anything similar on the Forums or wiki.
Perhaps one of your other buttons is stuck in, did you try to clean the BA?
Thanks for the suggestion!
Checked, doesn't seem to be anything stuck; everything responds correctly to being pressed except the power button. So it's still broken
Hi,
I have the following problem with AE Button plus with my Touch HD.
I had the problem with closing the phone during i was taking it out of my pocket.
I installed AE Button plus and assigned only to the Red button a function. All is OK, when the phone is ringing the Red button is not working, but the problem is, that when i pick up, it is not working again and i have to end the call with the touch screen button and it is very annoying.Is it possible this Red button function to work only up to the moment i have answered and after that to have normal button functionallity?
PS. Sorry for my bad English!
AE Button Plus - please help
Please, help me with the above issue!
Thanks in advance!
why is it annoying to use the touch screen to end the call?
I would suggest to leave alone the single click of red button but instead map a double click function you want to the red button.
I've had this problem previously. I love AEBPlus and think it is probably the best app on the phone. You need to uncheck the option under 'other options' for 'drop on red key'. Paradoxically this should not be checked. When checked I cannot drop on red key but when unchecked I can end call using this hardway end key. Let me know how you get on!
The AE Button Plus didn't seem to work on my Blackstone (HD). It would work after being reset but after a while, the mapping has no effect anymore. I want to map the volume up/down button to "Up/Down Arrow" and the Long Press of the Volume Up button to run the S2U2 application. Anyone has similar issues?
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
tatou said:
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
Click to expand...
Click to collapse
That is exactly my problem. I should not have paid for the software if I knew that it works intermittently.
Do you have some taskbar installed? Try to remove.
hi
i hope somebody can help me.
The buttom om my screen, maby an inch over the menu byutton, isent always vorking.
sometimes not even the 3 menu buttons. i have to turn off the screen and on again. this will usaley fix the issue.
When i am texting, sometimes it goes totaly mad on me, and the phone it self is pressing the keybord wery fast. making alot of stranges words .
i have to turn off the screen and on again for me to fix it.
seems taht i did not have the problem on stork. i have ben using leedroid 6.4. and wanted to test is a new firmware could fix it.
i turned to wiper xx. but this did not help. i even trayed an install without sence...
seems that i remember that the issue first starded a day when my phone got 100 % out off power..
anybody know how to help me ?
thanks!!
Are you talking about the 3-dot menu? Or the softkeys actually underneath the screen, I didn't understand what you was getting at, I'm sorry, your English isn't very clear.
If you can take and upload screenshots I'll try to help you.
Screenshots: Press and hold your power button down and then press the homekey.