Develop Bugs

Hard reset on the wizard.

Yesterday I installed the following .cab on my wizard:
http://www.pocketpcfreewares.com/en/index.php?soft=1137
When I finished the insallation my qtek was freezed. And it did not function any more....
I really want to do a hard reset but my phone can't connect to active sync anymore....
Does anyone have a solution for this problem???
Thank you in advance.....

If the device wont boot any more, the only thing you can really do is a full reset.
I assume you've already tried a reset?

That is the problem.... my device cant connect to active sync aymore... and I dont know another way to do a full reset...

You should have the clearstorage program on your phone. Run that, and it'll hard reset you. There's a button combination as well to do the same, but I don't have a wizard to tell you it. Check the wiki or use search.
V

- Switch off your device
- Press and hold the Comm Manager and Voice Dial button
- Switch on your device (while holding those 2 buttons)
- Press the Send (green button) key to give it a hard-reset.
Good luck.

how to upgrade the device if there is password

i have startup password for my device wizard, i forget the password so the device is working i can receive phone calls but i can not use the other option ,i try to reset but paassword is still there so how to solve this please let me know .......

goto the wiki page above, and read section how to make a hardreset to reset phone to factory setting, clearing all the stuff inside, including SMS, contacts, notes, calendar, etc.. and your password.

WM6 / Activesync 4.5 will not pair

Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K

Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)

Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K

Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly

If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...

Did any of these methods work? did you do something else to make it work??

This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?

yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'

Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K

I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time

I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K

lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K

start->settins->USD to PC-> Enable advanced network functionality

Oh, OK. I'd already done that! Keep coming in with suggestions though!

Problem with internet usb connection - AS

1. Previously when I connected my artemis via USB with AS everything was OK. I connect Artemis to PC without advanced PC connection, today it doesn`t work.
2. When I try to change advanced settings USB to PC/Enable advanced network fuctionality (ON), AS is connecting.
In my PDA appears the problem that I can not give the address IP, it causes that internet doesn`t work.
In the first case AS I received an error that I can`t get the IP address and I should visit MS Page.AS doesn`t connect.
I used SK Tools soft and clean pda, mayby this crash the pda?

I find the isue
http://forum.xda-developers.com/showpost.php?p=1529888&postcount=45

Way to disable internet sharing on WM6.1 device?

Hi all,
Is there a way to disable this? It's driving me crazy - each time I connect the HTC Touch HD to the computer, instead of syncing it tries to share the phone's GPRS with the PC (which I dont want/need)..
Is there a way of permanently disabling internet sharing on the phone? I need activesync back!
cheers for any help..

*BUMP* IO have this problem please help

Take a look at this post.
http://forum.xda-developers.com/archive/index.php/t-271174.html
I was having the same problem and it did the work.
Basically this is the solution that works for me.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDri ver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDri ver“=“Serial_Class“
Click to expand...
Click to collapse

I have the same problem.
Editing the registry didn't work, I can't change to Serial_Class because it is already Serial_Class.

I have found the way to solve this....damn easy.
Today, is my second time I faced this problem. During the 1st time, I have tried many ways: restarts, edit registry, delete and add settings, but it didn't work, finally I reset the PDA and re-install all my programs. Damn!
The way to resolve this problem is: let it connects the internet sharing once, then unplug the USB cable and reconnect!!! I will automatic let you choose whether to connect as "ActiveSync", "Disk Drive" and "Internet Sharing", so you choose back the "ActiveSync". That's all....easy right?

yjjason said:
I have found the way to solve this....damn easy.
Today, is my second time I faced this problem. During the 1st time, I have tried many ways: restarts, edit registry, delete and add settings, but it didn't work, finally I reset the PDA and re-install all my programs. Damn!
The way to resolve this problem is: let it connects the internet sharing once, then unplug the USB cable and reconnect!!! I will automatic let you choose whether to connect as "ActiveSync", "Disk Drive" and "Internet Sharing", so you choose back the "ActiveSync". That's all....easy right?
Click to expand...
Click to collapse
cheers for that it was driving me nuts!!