Hi to the list,
i own the handsfree kit parrot CK-3300 paired with the
qtek 9000.Since i've upgrade the PDA ROM i have noticed a problem.
When i syncronize the PDA contacts with the Parrot, in the Parrot i find like two phonebooks.
The first one contains all the contacts as i inserted them in the pda but at the end of the names there is added an /H or an /M or an /W.
The second one at the end of the first one without any division, contains all the contacts as i inserted them in the pda but without any added characters and/or letters at the end of the names.
All this, is one under another without any division.
Ifi try to delete the contacts which contains the added letter at the end of the name in the Parrot, it say that it is impossible to delete it.
Anyone can tell mewhy this and how to solve it out?
Thanks in advance for help.
/H .... home
/M .... mobile
/W .... work
Right i knew that but wht it syncronize two times?
Almost the same problem
Hi Did you solver this. My Universal only send the /H/M/..... numbers to my carkit.
I realy hope someone knows how to solve this
This is with a parrot 3200 and universal/QTEK 9000.
Related
One of my pastimes is sending inoccuous messages and pictures to peoples phones over BT. I've been successfully doing this for ages with my Sonyerricson K700i. I've had fun sending ringtones and themes to people for free
When I attempt to do this with the XDA it fails saying the remote device doesn't accept messages this way. I assume its cos the XDA is using a different protocol to the K700i. Is there anything I can install to address this?
Cheers,
Steve
don't know about your question but would also be interested in the answer.
I work at the airport and it seems that everyone has there bluetooth on. even the names people call themselves are quite funny. im still trying to work out who calls themselves "jugs" :lol: near my desk
who calls themselves "jugs" near my desk
Click to expand...
Click to collapse
Wouldn't that be obvious...... ;-)
stevesm said:
One of my pastimes is sending inoccuous messages and pictures to peoples phones over BT. I've been successfully doing this for ages with my Sonyerricson K700i. I've had fun sending ringtones and themes to people for free
When I attempt to do this with the XDA it fails saying the remote device doesn't accept messages this way. I assume its cos the XDA is using a different protocol to the K700i. Is there anything I can install to address this?
Cheers,
Steve
Click to expand...
Click to collapse
Maybe becasue the default setting of the XDA is for the remote device to promt a passkey and for the sender to type in that key, that way, the sender cant figure out the key.
a possible solution?!?
Allright, i will give it a try to, .
First of all the so called os systems on the pohe's are different.
ringtone's (mp3's) should be possible to send; when they are supported on both phones, otherwise he stays in your sms incomings box till you delete it.
And like others explained to you both need to have the same passkey for doing this.
on some older phone models it was possible to do this due an security isue in bluetooth.
But time does not stand still and update come often, this bug become's less vurnable for phones.
So best way i now to send a ringtone is, with a passkey al my friends know to use "0000" is basic so you putt that in.
Or take a held on your friends phone (when he is not awhere) to make them autopairing.
just like a bluetooth headset.
Hope some others have better solutions for this.
:?: :!: :?: :arrow: :idea:
Cheers guys, I know about pairing On teh K700i though, I can normally send a contact to say a Sony Ericsson T610 or Nokia 6310i without interaction by the recipient. The XDA IIs seems unable to do this.
I believe that its because the XDA hasn't got the correct protocol. Should be Object push instead of Object exchange, am I right?
Steve
I have been searching for something of this sort but was not able to..
Bluejacking
I also like to do this and im sure i have been able to send contacts to the phones mentioned. With the latest bluetooth stack there should also be no problem sending files. I know I have sent files ot my brothers phone without pariing but I had to alter my bluetooth profile.
In any rate this software http://www.net-cell.com/MP/ sends messages to any phones in range continously without the need for action on the recipiants phone. It works on the XDA2s.
Lewis
Re: Bluejacking
BigDamHero said:
In any rate this software http://www.net-cell.com/MP/ sends messages to any phones in range continously without the need for action on the recipiants phone. It works on the XDA2s.
Lewis
Click to expand...
Click to collapse
I went to their page, and selected the download for the XDA II but they say it isn't supported. Which model did you download for?
Re: Bluejacking
BigDamHero said:
In any rate this software http://www.net-cell.com/MP/ sends messages to any phones in range continously without the need for action on the recipiants phone. It works on the XDA2s.
Lewis
Click to expand...
Click to collapse
I went to their page, and selected the download for the XDA II but they say it isn't supported. Which model did you download for?
I don't know if am missing something here guys,but I am sending files over bluetooth to all supported devices(Nokia,SonyEricsson,Samsung...)all the time from my MDAII(Himalaya)...
I just go to windows explorer(not Resco),select the file,press and hold,then select beam file....then I can detect every single bluetooth device with bluetooth on in range...just select it and...voila...the other device gets notified that someone is sending a file,and,by accepting it,it will be sent...
am still feeling am missing something,it cannot be that easy...
Cheers...
RAGO :lol:
When I try and send, I get a message saying the device doesn't support the recieving of messages. Pairing I can do but on the K700i I used to be able to send a contact to certain devices no problem.
When I select 'Beam' I get nothing. Seems to be only for Infra-Red.
I also tried Meeting Point and it crashed on my XDA IIs
Steve
Well all.
Is none of you aviable to send a contact?
To do so called bluejacking on my xda,
I simpy create a contact called "bluejacked"
Then i go to my contacts,
And hold down the conact called "bluejacked.
In the menu what pops up i find a button.
Something called "send contact by bluetooth". i'm not so sure :roll:
then i let my device search for bleutooth devices.
Once someone's bluethooth is on i simply push on the device in my screen.
And 90% of the message's i send this way are delivered.
don't need of a passphrase when you're sending a contact.
Did this with my xda and a sony ericson k750 the both worked in both way's to almost all phone's
Is this also working for other XDA phone's?
:roll:
Hi!
I'm subscribed to weather forecast that comes in 3 text (SMS) messages every evening @ 10 PM.
When I swiched from wizzard to hermes, I noticed, that I got only one or two messages instead of 3 every night. I thought there has to be a problem with the device, so I changed it.
== BUT==
Now I have a brand new Hermes - and with the same problem!!! It just looses SMS messages. Several people have been complaining to me that they sent me SMS which I did not receive.
What would be the problem?
the first hermes ran WM6 black 3.01 with 1.41 radio and the second one runs WM6 black dymond with 1.40 radio. The only common thing is that both devices were treated with Oli's HardSPL 7.
p.s. when I put my SIM card into a nokia, I receive all 3 messages as normal.
PLEASE HELP!!!
I dunno if this will help at all but...
...try going into start>settings>phone>services(tab)
click on 'voice mail and messages' then tap the 'get settings' button.
It should get the SMS and voicemail numbers from the network.
Might help...but its a long shot.
mrvanx said:
I dunno if this will help at all but...
...try going into start>settings>phone>services(tab)
click on 'voice mail and messages' then tap the 'get settings' button.
It should get the SMS and voicemail numbers from the network.
Might help...but its a long shot.
Click to expand...
Click to collapse
That actually helped me in the past. For some odd reason my SMS's would get stuck in the outbox and not send, so upon advice like above, I clicked "get settings", and all was well. It hasn't happened in a long while, but it was solved by doing that.
it actually may be your sim card similar thing happened to me got a new sim card fixed it.
I had a very similar problem with normal ssmes not coming thru and smses being held in the outbox. The problem started when I changed to an AKU3 Rom. The old South African 1.35 Rom worked perfectly but as soon as I changed to their new AKU3 the sms problem started. I had also upgraded my Radio to the 1.41 Rom.
How I solved the problem was I got my sim card replaced (which I found didn't solve the problem). I then only installed the apps I really needed and didn't upgrade the Radio.
For the past 2 weeks I haven't had any problems, so maybe try hard reset your phone, and start by only running it as standard and see what happens, also maybe try downgrade your radio.
Ensure the you have a message centre assigned in the phone settings. If you cannot get it automatically, call your operator and enter it manually.
Hi rebel I have noticed the same problem...but it is regarding the SMS and MMS...so could be some operator incompatibility or sth...will try the"get operator settings" thing...but I think this won`t solve our problem, cause not receiving all SMS/MMS it is a thing...but not receiving just some SMS/MMS is another problem...
Regards,
Primoz
Hello to all!
I tried "get operator settings" and will report if there will be any progress. But I doubt, because if settings were wrong, than I wouldn't receive any text messages. But I can receive SMS, just not all of them.
It just makes me crazy.
@PC78: we're both using same network (Mobitel Slovenia). If you had exactly the same problem, than I guess it has to be some incompatibility between hermes and operator? I will contact them and ask for explanation.
In the meantime, I will flash my hermes to some old ROM with stoneaged Radio (1.03 or something). Let's see what happens ...
Greetings,
Robert
I have the same problem, could it be the HardSPL?
gh0st, where are you from? Till now, only users of Mobitel Slovenia reported this problem.
I don't know if it's hard SPL. But it's possible. Can it be removed from the device? I'm willing to try. But I need some instructions on how to remove it and bring the device back to the "factory" state.
regards,
Robert
...Hard-SPL?...what have the Hard-SPL to do with SMS/MMS?...I think it could be only an OS/Radio ROM problem or operator incompatibility but not Hard-SPL...
Regards,
Primoz
same problem here...
delayed texts and no sms recieved...
i found out that even i have signal on my cel, im out of coverage when contacted.. but this is intermittent
there are times its ok.. then not.. then ok..
this happens only when i upgraded my dopod 838 pro
thats why i ask experts here on other thread how can i roll back the original
setting of my cel.. specially the radio..
im from asia region... can anybody help me too..
i upgraded to 1.40 radio which i think suited only for cingular network or other else...
Hard spl olipro 2.10 etc...
I had problems with SMS wneh using Black 3.0, using LVSW (latest) now and have no problems.
I suggest you try using one of the LVSW roms instead of Black - try Elf's or Sleuth's variants as they are the most complete.
Also, the most popular shipping "new" radio out there is 1.38.00.10. Try that radio as well.
Hello guys,
A bad news, really.
It's confirmed: Hermes has some serious compatibility issues with certain mobile operators (networks).
I contacted a company that imports and repairs HTC devices in Slovenia. Technician told me that they are aware of the problem and are solving this "missing SMS" issue together with carrier (Mobitel) and manufacturer (HTC).
They didn't yet solve it, though.
This technician also told me that this problem is ROM-independent, so it does not matter if I'm using june 2006 stoneaged ROM with 1.03 radio or newest cooked WM6.
Greetings,
Robert
go into start >> settings >>> phone >>>services >>> click on voice mail & text messages and click on get settings
it will show you your settings for text message service center. Make sure there is a "+" sign before the number. for example + 1 (312) 314-9810 >>> this number is for cingular message center anyways "+" sign should solve the problem
cheers
thesame problems with sending sms or replaying and reciving.
even on orginal Era's ROM
Sometimes everything is perfect but when I tap replay, sms stucks in outbox.
Or sometimes when just wanted to write new sms.
Only SR helps.
my operator: Poland - Era gsm
Thanks for the replay Rebel...so my concern was [email protected] incompatibility problems...doooh...
Regards,
Primoz
I have had my hermes for only 1 week on T-mobile uk PAYG. Everthing works cool, but I have had a couple of calls from people why didnt you respond to "x" text message. they just did not ever come through at my end.
Guess this is the price to pay for having everything bar the kitchen sink in your pocket.
I can comfirm that I had this problem on Black Dymond (3.5) with certain type of sms.
with elf 2.1 crackberry all works well.
So it Is rom dependant.
Arnie
p.s radio 1.40
Hi,
I just upgraded the official rom WM6 released by Dopod,
I have some problem with Text SMS function
1. Previously with WM5 in SMS screen -> TO:, at this areas is you type some alphabet is will show the contact that simply match the character.
I.e. Type "A", andy, anna etc... However, this not happen in WM6 -_-"
How can i get this fuction back
2. Everytime i press send button on, is will pop up the error msg:
"cannot recognize one or more recipients or the address is not valid. would you like to send the message anyway?" (Yes/No)
If press yes the sms is sent..
This is very annoying.. -_-"
Thanks in advance.. Any body knows how to slove this issues, please help..
Solution
Any body knows the solution?
Thanks
i've been getting the same thing too but for the wizard. let me know if you have a solution.
I've got the same problem, but after a soft reset it is resolved and the orginal funcionality is back.
Let's see the problem will return or not...
Hello everyone
Before i had updated my T-mobile compact III, i had the option te make a contact directly in the phone. But after the update to Wm6 i only have the option to make the new contact on the sim. What can i do about this issue??
Greets
Tjeuke20
Hi
Had the same problem. Save it on the sim and then edit te entry. It will be on the hone.
Otherwise if the phone asks you where to save the contact,save it as anOutlook contact - also on the phone.
Hope this helps.
Hi all,
I have a pioneer BT unit in my car, it only accepts vcards send via bluetooth on the phone to create a phonebook on the unit.
I can send my contacts one to one to the pioneer unit by sending them as a v-card in the contacts app.
in my old phone (touch dual / niki) i was able to select multiple contacts and send them all together to my car-stereo. I can't find this option anywhere.
I installed bluetooth file transfer, which has the possibility to send multiple contacts, but that doesnt work on my desire, it hangs all the time and it messes up my bluetooth settings such that a connection could not be made with the app installed.
does anyone have any clue, or great app for this?
Well i'm having a MB bluetooth module in my car.
The problem i'm having is somewhat the same as above.
I can upload vcf cards one by one but that would take me ages. I can also go to: "contacts>import/export contacts>Share visible contacts>Bluetooth". When i do this, it always fails...
Anyone has a clue to this?
Regards
Mr H