Related
Hi guys, just wondering if any users out there are having the same problems as me. ive had my Blue Angel now for a good 6 months and im very happy with it appart from it doesnt ring which is very very annoying :twisted: anyone know a fix for this?
But main reason for this post is; has anyone got the same problem that the holder for the stylus has become used and now doesnt hold the stylus in place anymore? i remember there being a click when pushing the stylus in. but now it just falls out when i tip the PDA upside down.
Anyone whos opened up a BA can you give any details on how the holder works? can it be modded so that it grips the stylus again? im one for opening up electrinics and playing with them but since i use this for alot of my work i cant risk it.
many thanks for any replies.
DJUPLIFT
I have the same issues. I tried to take mine apart but could not seem to separate the back side of the case. I removed 3 screws from behind the battery, and one from either side of the device. I too would like any input.
It totally blows... cos i always end up taking the phone out of my pocket and sometimes i dont hear the stylus drop. ive already lost two like this... it might end up being more expensive to just keep buying stylus than to open the BA and screw it up... All in all my ones been opened already :shock:
i dropped it on concrete and somehow the touchscreen stopped working although the screen was intact. O2 replaced it with a brand new one for diddly sqwat!! FANTASTIC!!!
i might just take it appart next weekend and have a little look inside see if there is a way to access this comparment and maybe doing a little DIY style modding!
if i come up with any conclusions ill post them with some pics of course!
DJUPLIFT
a friend of mine took his apart and there does not appear to be a way to tighten the stylus. He said it was just a small plastic protusion that held it in place. Once it wears, you are out of luck. Have not seen this myself, but thats what he tells me..
Regards
chris
that's correct, it's just a plastic clip protruding to grab the gap on the stylus. if it's broken, you may just have to put a tape or sticker around the stylus to make it tighter.
there are 4 screws (one under the void sticker) where the battery goes. i just took mine apart to tighten slider. it's back to sliding smoothly & tight, however, there's still a noticeable gap (between the screen plate & keyboard plate).
anyone knows how to eliminate this gap (about 2mm)?
Try this solution: http://forum.xda-developers.com/viewtopic.php?t=15120&highlight=loose+stylus
Cheers
Frankman
I use 1 layer of tape around the stylus. spanning the groove in the stylus. This seems to make it a good bit tighter, but does not fix the problem entirely. Hope that helps..
Regards
Chris
i dont like the idea of having tape on my stylus... looks well tacky going into a metting with clients!!
so i took some black insulation tape and made small squares with an art blade and stuck them to the inner edge of the holder... now it sits there nice and tight like a school girl
S O R T E D!!!!
cheers for the help guys/gals.... if any....
An idiot friend of mine put a blade of grass in the stylus holder and now it wont come out. How do I fish it out? The good thing is, my stylus doesn't slide out so easily anymore.
I have also encountered this problem(i got my BA 6 months till now), however it is not that loose as what ur described. at lease it never drop out when i was outside. (after reading this i become worry about it)
I used to own a IPAQ 5550, when i got my BA, i thought the quality of the stylus is better than ipaq's plastic stylus(should have some heavy stuff insde..), i like the BA's metalic stylus.
Now i found that the IPAQ plastic stylus + the spring-like system inside the whole is much better...i want to have one BA + the metalic stylus + the spring-like system to hold the stylus....
if some day i am that unlucky to lost my BA's stylus i will try to use the 3-in-one PDA pen... once it lost one, i may lost another... i wont use normal stylus if it happened.
DJUPLIFT wrote[/quote]
i dont like the idea of having tape on my stylus... looks well tacky going into a metting with clients!!
You have to use that "invisable" tape and only the keyboard and buttons if its a Director or above! :lol:
Click to expand...
Click to collapse
Loose stylus - Stylus falls out
This has worked for me. It's been 5 months, and it still works.
-Back up your data.
-Remove the cover you will find a small tab in the stylus channel intended to engage the notch cut into the stylus. Gently push the tab back into the stylus channel so that it will engage the stylus notch once again. Be careful if you push it too far it will break.
-Slide the stylus into the channel to verify that the tab again engages the stylus notch.
-Remove the stylus again.
-Apply a small dab silicone sealant (available at any hardware store) behind the stylus retention tab. This is the "V" shaped area between the tab and the case. Be sure to fill this entire area. When the silicone has cured it will become a spring with much better position memory then the original plastic tab had on its own.
-Reassemble your BA.
-Allow 24 hours for the silicone to cure before inserting the stylus into the channel.
I believe this is more then a repair, it is an upgrade.
Good Luck,
N2O2
Yet again we're having to come up with dodgy (although well thought out) solutions to HTC's shoddy design flaws. My BA is about 3 - 4 months old and its up to this already. I keep finding my stylus on the floor.
Thing is, all these solutions void the warranty and I have to take mine back soon (See the Xray thread ) and am hoping for a replacement on insurance.
The P800 and XDA2 had this problem as well, but surprisingly I have NEVER lost a single stylus in my life! I always just happen to find them again. One time I found my P800 stylus 2 days later in the street between my college and my flat :S
Re: Loose stylus - Stylus falls out
N2O2 said:
This has worked for me. It's been 5 months, and it still works.
-Back up your data.
-Remove the cover you will find a small tab in the stylus channel intended to engage the notch cut into the stylus. Gently push the tab back into the stylus channel so that it will engage the stylus notch once again. Be careful if you push it too far it will break.
-Slide the stylus into the channel to verify that the tab again engages the stylus notch.
-Remove the stylus again.
-Apply a small dab silicone sealant (available at any hardware store) behind the stylus retention tab. This is the "V" shaped area between the tab and the case. Be sure to fill this entire area. When the silicone has cured it will become a spring with much better position memory then the original plastic tab had on its own.
-Reassemble your BA.
-Allow 24 hours for the silicone to cure before inserting the stylus into the channel.
I believe this is more then a repair, it is an upgrade.
Good Luck,
N2O2
Click to expand...
Click to collapse
Great idea! It's perfect!
THANK YOU N2O2
N2O2
You just made the wiki hall of fame
http://wiki.xda-developers.com/index.php?pagename=BA_Sty_stopper
Any Kentucky Fried Chícken fans out there?
After losing 5 styli - not only because they were loose in the holder (one went on the motorcycle after I missed the holder hole and then let it go) I came up with this junky solution.
The KFC corn cob holders are a good diameter (had to add a thin layer of tape) and just long enough to be modifiable to add a knureld part at upper end. At at least one of their restaurants I found them outside of the front counter and was able to obtain a few cheap spare emergency styli
Oh well.
:lol: :lol: HAHAHAHAHA You are grade man .....
Lost another one from the new phone in the few hours since I posted the KFC thing.
Uuuups - time to go out for a buckt of the Colonels finest.
Lost another one from the new phone in the few hours since I posted the KFC thing.
Uuuups - time to go out for a buckt of the Colonels finest.
Lost another one from the new phone in the few hours since I posted the KFC thing.
Uuuups - time to go out for a buckt of the Colonels finest.
So... I've purchased a Vodafone v1640 from eBay a while back.. and I'm sick of the silver housing! I'd rather have a white or black housing, so I plan on opening the sucker up to paint it! I'm pretty sure I have no warrenty anyway, as I purchased from eBay and am not on a Vodafone plan (Cingular here in the USA)...
My question is... what's the best type of paint to do this with? Any special sort of paint?
Or, I guess, if there's anywhere I could buy different housings for it, pre-painted.. that'd work too.
Any input at ALL would be greatly appreciated! ;D
I want some infos too on this case for a new housing because black housing for Universal looks the best.
From my experience of disassembling the HTC Charmer, I think the HTC stuff are kinda tightly fitted, it might not be that easy to have it painted. I mean, I'm not sure how good you are at painting, but for the paint job I did (on other stuff, toys, cars, shelves, not the phone, yet), I usually end up with a thick (relatively) layer of paint on it, which I think may cause problem when you try to assemble the phone up again.
So, my advise, make sure you can really do a skin tight paint job before you try it on the phone, as it seems that it is really difficult to get a spare casing for HTC stuff.
BTW, you may want to look at some of the web site for PC modding, where they tend to mod their keyboard and mouse, giving them new paint job, probably such forums will have experts on the paint that you should be using.
you might have to experiment a bit if you haven't painted before...
The most impoportant thing is to find a dry place with no humidity.
You can get the retouching spray for cars called deco paint. It will work well.
p.s. IMO black housing will look good if you have a black keyboard.
Hmm black keyboard...
very good point.
i once painted my dreamcast controller black 8)
just used a normal spray can for it (didn´t have an airbrush at that time yet)
works very easy:
- open it up and remove all things you dont want to spray
- clean everything very good (with terpentine/gasoline/ammonia for example)
- let it dry
- spray it (very thin, because you don´t want to make drops of paint on it) from about 15-20cm away (any closer and it will be more difficult to avoid paintdrops and keeping the paint thin
- let it dry in a clean enviroment
after a few months of usage the paint will shine on spots where you hold it much...
so you might want to spray some colourless shine stuff (sorry: don´t know the name for it in english, it is ´lak´ in dutch) on it after the paint is drie to have the color remain the same way
or you could just touch it everywhere so the shine is everywhere :wink:
heh, it's close in english, it's pronounced 'lak-ker', spelt lacquer
Anyone have any luck with this repainting the case idea? Any pictures?
i did my old mpx 220 before black cases were out, i used a special, plastics spraypaint from krylon. flat black ,and clear topcoat. i dont have the pictures anymore but it was nice. just take your time read up on painting . thin light coats and follow the directions on the can.
I have been meaning to get a screen protector for my Orbit, but as fate would have it, my 2-year old son has managed to scratch it in the meantime. Has anyone any good advice on how to lessen the effects of the scratch? My current plan is to rub a little furniture wax on it before applying a screen protector, but if anyone else has any better ideas, I'd be really pleased to hear them!
Thanks,
Tim
Google Displex Screen Scratch Remover, I had good success on an old sony ericsson, but not too sure about the XDA screen.
Normally i would suggest you use these fluids bluchrome mentioned, they work very well on hard!! displays. Since this is a Touchscreen, the display needs to stay soft so maybe such fluids and propably furniture wax won't lead to a satisfying outcome. That's my opinion, i dont know if i would try it... Your call
Yeah - I had read that Displex shouldn't be used on touchscreens...
Using this kind of stuff is O.k on perspex, etc. You would be rubbing this on the digitizer (screen is underneath). This cant be good in any situation. Put up with. Or try placing a screen protector on now. It might actually conceal the scratch more than the displex will.
Blartiartfast said:
Using this kind of stuff is O.k on perspex, etc. You would be rubbing this on the digitizer (screen is underneath). This cant be good in any situation. Put up with. Or try placing a screen protector on now. It might actually conceal the scratch more than the displex will.
Click to expand...
Click to collapse
Actually it does conceal the scratch to quite an extent,my k-jam screen was badly scratched but after applying the screen protecter could hardly see it.Applying wax would be a bad idea,as your touch screen may loose some of its sensitivity.
Well, I did apply a bit of silicone wax to the scratch, but it didn't make much difference. However applying the screen protector has reduced the appearance of the scratch and of course, it's no longer possible to feel it under the nib of the stylus.
I have a jewellers rouge cloth, which for those that do not know, is a soft cloth impregnated with an extremely fine abrasive, as far as I know it is as fine as anything commercially available. Although I haven't polished my orbit screen I did polish an old pocket loox and a lot of old watch glasses that i used to repair. Sounds silly but toothpaste is also a very fine abrasive and can be used to polish out fine scratches in plastics, there is also t cut and brasso which also are obviously for polishing.
If anyone were to try such a thing remember to mask off the rest of the machine so that only the scratch gets polished.
Is is not possible to buy a new screen cover and fit it?
I polished LCD in my old laptop with CD recovery kit (some kind of abrasive compound and small wet cloth). Good luck...
You can get replacement digitisers, but I think they will either be difficult to buy atm for a reasonable price.
Dont think that the laptop screen was touch sensitive. This was ok in your case. Dont polish your pda's "screen" it could be bad.
had my TP2 nearly a year but recently i have noticed the screen has like a rectangle shape oil slick type mark on itvery noticable and seems to be getting worse anyone else had this??
its as though there's water under the screen protector but when i remove the SC its still there
search newton ring.
newtons ring??? kind of the case. the "oil slick" is mearly trapped condensation between the digitizer and the top plastic covering that you catually touch(the plastic you put the screen protector on). moisture seeps in through the bottom keys and earpiece in forms of vapor and liquid. this occurs when you have your phone in your pocket or use it in humidity(shower or weather)...congrats, you ve trapped your sweat lol. the reason why its rectangle is because the screen/digitizer and top plastic are not set flush together. as you know, the top plastic is very flexable so you can take your finger and feel the various componets in the empty spaces. i can confirm my finding because a few months back, i replaced my tp2 screen. i seen it had the oil slick before i opened it and before i put humpty back together again, i wiped under the plastic screen and felt a slight moist film. i tried to guess how the hell water got in and i concluded by a salty electronic taste...yeah i smelt and tasted it...that it was sweat. i always carried my phone in my front pocket and over time, the sweat built up. after a wipe with electronic cleaning cloths, an air dry and then an air can blow(i love my phone lol), i put it back together and bam...no oil slick. another way to think of my theory is, you know when you swim with your watch and condensation builds up on the inner quartz and makes it look foggy?...same thing here. only thing different is that there is only one flat surface and not 2 like inside the phone so the moisture wont look like an oil spill, it will just be foggy.
so how do i open the screen up to get rid is it easy enough to do or will bloww warm air over it do it ???
combat goofwing said:
so how do i open the screen up to get rid is it easy enough to do or will bloww warm air over it do it ???
Click to expand...
Click to collapse
there are lots of vids on how to disassemble the tp2. check youtube. just to let you know, its a long process. you have to take apart the entire phone just to get to the screen...good luck.
ps i would post the vid link but im typing this off my tp2. if you cant find a good video, i will link one here later.
check my skydrive for the dissasembly doc
http://cid-fe479a288f53bea8.skydrive.live.com/browse.aspx/.Public
Coucou !
I've already dismantled my TP2 without any major problem.
I took the screen apart from the bezel, but they stuck together with a foam adhesive, which I don't know where to find it.
I call my local major electronic reseller, but he doesn't have any and doesn't know where to find such...
Can you help me, as my phone relies into pieces on my desk, not usable!
I hope someone has the answer.
And sorry if my english is wrong, I'm better in French !
Hi,
I had the same problem, eventually used a product called (in the UK) Evostick Serious Glue which bonds to glass and sets in 3 mins, I then assembeled it and clamped the whole thing together with small rubber faced clamps until set.
Still holding 6 months later although I wouldn't like to try taking it apart again.
Coucou !
As I can see, this foamy adhesive has an non-negligeable thickness, about .2 to .4 millimeter... Is it about the same with this glue?
And I thought about Neoprene glue (correct word?). What do you think of?
And first of all, thank you for your answer and your advice!
I am going to replace the screen of my hd2 and I've read a lot about it. Some people advice double sided tape with 3 millimeter wide. Or you take 2 or 4 millimeter but you get my point
Maybe you could try to find that instead.
Coucou !
Just double-side tape? No foamy stuff ? OK, I'll wait for your answer and then try, as my phone is still in pieces on my desk...
I tried double sided tape to begin with but it wasn't strong enough, and was very difficult to cut to the small strips required.
The glue is a gel which doesn't run all over the phone casing like a low viscosity superglue and I would imagine does take up thickness but likely not as much as the original foam.
You can google it, it's on the Bostick web site, comes in a silver tube but doesn't say what the active ingredient is to find a similar product in France.
Gordon.
Coucou !
OK, I'll follow your advice, as I'm about to buy Evo-Stik Serious Glue, as seen here:
http://cgi.ebay.fr/Evo-Stik-Serious...pplies_Stationery_ET&hash=item4399564359#shId
And I'll have to wait till delivery, may be next week...
By the way, I maid a mis-spelling! I said "fought" instead of "thought"...
I was asking you what you think about neoprene glue, as I already have some at home. So ?
Thanks again!
Hello again,
Yep that's the stuff It's supposed to set fully in 2 hours but I left mine clamped overnight just to be sure as it gets full strength in 24 hours.
If you don't have small rubber faced clamps I'm sure you can rig something up even just leave it under something fairly heavy. If you're lucky and it holds after the suggested 3 minutes you may not even need to do this but mine was still moving after 3 minutes so I decided to clamp it.
I'd guess your neoprene glue is some sort of rubber adhesive, possibly a vulcanising glue which will melt rubber for bonding, repairing punctures etc., it may smell of petroleum but I guess it will be no good for your phone.
Good luck, let us know how you get on.
Gordon.
Coucou !
I bought that now-famous Evo-Stik Serious Glue as I said in my later post.
So it should be now somewhere between England and France!
ASAS I received it and rebuild my phone, I'll get in touch and give you some news.