Develop Bugs

Softwares installed after hard reset in Eten M600 ppc

Anybody have the list or know how to get the installation files for softwares installed after a hard reset / rom installation in Eten M600 ppc?
I have a problem running WM5Storage with rom 215 and 216, but was ok with 213. Based on someone's suggestion, I soft reset the device after hard reset and just before auto installation of softwares (after the screen alignment process). And then install and run WM5Storage and it works!
So, I'd like to track down which software conflicts with WM5Storage, and also Softick Card Export.
Thanks.

A bit confused here, I think what you are looking for is the programs in your `Ext Rom`. Do search (on this forum) to see how to extract / unlock this ext rom for your device.

I tried all I can find, but no luck.

Sorry, just got to know that your ETEN M600 is not from HTC where most of the discussions here are about. You may want to try your luck on other places.

how do i install realone player ?

How do get realone player into my BA? BBC pda says it will play only realone most of the times and only sometimes on WM.can any one help me plz?
rom-1.31.00 wwe

there is a realplayer for ppc do a google search,
if it doesn't install (during the install process) go to temp files and you will find the real.cab copy it to your ppc and install it.
if you still can't find it post here I'll send it to you.

Thanks,will try and get back.I did download realone from the net for ppc to my desktop,should I copy this to my storage card and then try installing it? Im pretty hesitant to do fiddle around ,if something goes wrong I have no one to pull me out here in cghennai except THIS FORUM!!
mukund

you can copy the application to the SD card
and make a shurt cut to windows\program
Sacaman

japa78 said:
Thanks,will try and get back.I did download realone from the net for ppc to my desktop,should I copy this to my storage card and then try installing it? Im pretty hesitant to do fiddle around ,if something goes wrong I have no one to pull me out here in cghennai except THIS FORUM!!
mukund
Click to expand...
Click to collapse
If you have downloaded a cab file then copy it to the ppc and run it from there. If it is an exe file, run it on desktop and proceed with the installation.
You might face some problems, if you have activesync 4.x installed because installer of realone works with only 3.x version of activesync.

got realone in finally
Yep I did it finally.Activated activesync via blutooth (remember my cradle is broken?)downloaded realone for PPC from the net.Ran the setup on my desktop and it automatically installed realone on my PPC via blutooth.It all seemed like magic but its done.Thanks guys you've been a great help.
mukund
chennai-India

realone
Alas I did alal the work and got realone into my PPc but it wont play any clip and says cant play this clip.why is that?
rgds
mukund

Can't install TomTom on Dopod's WM6

Hi there!
I had TomTom Navigator 6 installed on my P3600 (it came on a CD with the device when I purchased it) and it worked just fine.
Yesterday, I decided to change my ROM from the official one to Dopod's WM6 one (the so called "Shadowmite's safely converted update").
Everything went fine, except for the fact that, whenever I try to install TomTom, it does everything like it was installing it without problems, but, in the end, it tells me:
"the installation of TomTom Navigator.CAB was unsuccessful"
Any ideas on how to solve this?
Thanks in advance!

That's because TomTom Nav 6 is not compatable with WM6 - a reason I have never yet upgraded my ROM until TomTom Nav 6.5 comes out and at least
HTC 3600 official WM6 ROM comes out.

Nighthawk2050 said:
That's because TomTom Nav 6 is not compatable with WM6 - a reason I have never yet upgraded my ROM until TomTom Nav 6.5 comes out and at least
HTC 3600 official WM6 ROM comes out.
Click to expand...
Click to collapse
Not true, it's working fine. The problem is at the moment the changing DEVICE ID which means you've got the activate the map fgain. You've got the reaload the POI (Safety camera's) too together with the Traffic info, then the DEVICE ID on the site has to be the same as in your device. Changing the DEVICE ID more then once every 6 mkonths isn't possible, that's the real problem. No software problems, just to update this field in their database.

FalconEddy said:
Hi there!
I had TomTom Navigator 6 installed on my P3600 (it came on a CD with the device when I purchased it) and it worked just fine.
Yesterday, I decided to change my ROM from the official one to Dopod's WM6 one (the so called "Shadowmite's safely converted update").
Everything went fine, except for the fact that, whenever I try to install TomTom, it does everything like it was installing it without problems, but, in the end, it tells me:
"the installation of TomTom Navigator.CAB was unsuccessful"
Any ideas on how to solve this?
Thanks in advance!
Click to expand...
Click to collapse
TomTom 6.03 installed fine after I flashed the Dopod SEA WM6 ROM (on my P3600). When I launched the application, it just asked me to re-register the software. When I typed in the license key, it started a data connection to TomTom and after a few seconds, TomTom launched as usual. By the way, there is an autorun file on the SD card that installs TomTom automatically when you insert the card in your phone.

go to hard-reset and the first install is tomtom. Work good.

FalconEddy said:
Hi there!
I had TomTom Navigator 6 installed on my P3600 (it came on a CD with the device when I purchased it) and it worked just fine.
Yesterday, I decided to change my ROM from the official one to Dopod's WM6 one (the so called "Shadowmite's safely converted update").
Everything went fine, except for the fact that, whenever I try to install TomTom, it does everything like it was installing it without problems, but, in the end, it tells me:
"the installation of TomTom Navigator.CAB was unsuccessful"
Any ideas on how to solve this?
Thanks in advance!
Click to expand...
Click to collapse
Use mUn's INDIGO Full, works great ... faster then any ROM before.

Ok guys, I solved it.
I was trying to install TomTom using the CD setup (and it worked before WM6).
This time, I extracted the CAB and copied it to my SD card and ran it directly in my device.
That did the trick.
Thanks anyway for all your responses.

Trinity wm6.1 radio 1.56.70.11 tomtom not work

hi guys,
i've flashed in a trinity the g77 rom ptg, and the radio 1.56.70.11, installed tomtom 7.450.9028 repack3, and when i run the tomtom it runs fine with the first configuration, and when a set the voices he crash,
at the second run o tomtom the device «said» : unable to start. Not enough memory is avaiable...
anyone have this problem, i've read and read posts, and i get no solution.
the same ocuured with other rom's, radio and tom tom versions.
thank you all
psyx

hi,
i don't think that tt7 is stable and this why probably tomtom don't sell it !
i have known the same issue last week, and many other bugs like map folder destroyed and today it was impossible to planify trips from gps position.
i think that i will go back to tt6

hi guys you are not right i've 1.56.70.11 and tomtom7 on my trinity and all works fine..

mcyes said:
hi guys you are not right i've 1.56.70.11 and tomtom7 on my trinity and all works fine..
Click to expand...
Click to collapse
same-same by me

psyx said:
hi guys,
i've flashed in a trinity the g77 rom ptg, and the radio 1.56.70.11, installed tomtom 7.450.9028 repack3, and when i run the tomtom it runs fine with the first configuration, and when a set the voices he crash,
at the second run o tomtom the device «said» : unable to start. Not enough memory is avaiable...
anyone have this problem, i've read and read posts, and i get no solution.
the same ocuured with other rom's, radio and tom tom versions.
thank you all
psyx
Click to expand...
Click to collapse
So deinstall tomtom complettly when delete all tomtom folder from device and sd card ( but not the MAP).
Reset the device and install tomtom 7 again.
before start tt7 you copy the voice files in the folder where tt7 is installed
and then you can start tt7.
and see it would work fine.

in order
- flash the radio
- flash the ROM
- install tomtom (don't run yet)
- copy voice into root directory, called voices
- start tomtom
if fail, soft reset your pda, and then start tomtom without starting any other application and see

psyx said:
hi guys,
i've flashed in a trinity the g77 rom ptg, and the radio 1.56.70.11, installed tomtom 7.450.9028 repack3, and when i run the tomtom it runs fine with the first configuration, and when a set the voices he crash,
at the second run o tomtom the device «said» : unable to start. Not enough memory is avaiable...
anyone have this problem, i've read and read posts, and i get no solution.
the same ocuured with other rom's, radio and tom tom versions.
thank you all
psyx
Click to expand...
Click to collapse
Did you try out any other radio rom?Give it a shot....see my signature start trying out and let me know if something gets better.

dta1974 said:
Did you try out any other radio rom?Give it a shot....see my signature start trying out and let me know if something gets better.
Click to expand...
Click to collapse
It isn't the radio that is the problem. The "out of memory" message comes up when there are remnants of a previous version or installation of Tomtom on the device. You need to uninstall the program and remove any trace of it from the registry etc.
Trust me.....TT6 and TT7 work extremely well in Trinity.

to report
on my p3600 running 1.56.70.11 radio + tt7 + chinese IME + other stuff to take up memory
everything works fine ! never had a problem... now radio fix was never fast with my device.. so that's about it

Andych said:
It isn't the radio that is the problem. The "out of memory" message comes up when there are remnants of a previous version or installation of Tomtom on the device. You need to uninstall the program and remove any trace of it from the registry etc.
Trust me.....TT6 and TT7 work extremely well in Trinity.
Click to expand...
Click to collapse
I know it works fine, but since i've changed from wm5 to the first wm6 he never runs anymore tomtom...
then, i've flashed 2 or 3 diferent roms 6.1 and radios... and diferent versions of tomtom with hard reset... and nothing.
now i've do that of the voices folders before run the 1st time and he stucks again...
i guess that with the hard reset no data from instalations remains... or not?
thank you all!!
psyx

psyx said:
I know it works fine, but since i've changed from wm5 to the first wm6 he never runs anymore tomtom...
then, i've flashed 2 or 3 diferent roms 6.1 and radios... and diferent versions of tomtom with hard reset... and nothing.
now i've do that of the voices folders before run the 1st time and he stucks again...
i guess that with the hard reset no data from instalations remains... or not?
thank you all!!
psyx
Click to expand...
Click to collapse
Where are you installing Tomtom? On the device or on the Storage card?
If you are installing to the storage card then YES there will be left over files from the previous installation. The voices folder should be on the storage card as should your map folder, install the program onto the device.

SOLVED!!
the solution...
just erased a file inside the map folder called mapuserpatch.dat and Mapseting.cfg... anfer the «touch» of the map...
simple thing... now when i put the map version 725.1883 goes fine!
Thank YOU ALL for your replyes!!
psyx

2790 WM Player question (newbie pls help)

Hi
I'm new, trying hard.
I have the 2790b, successfully flashed wm6.1, thanks to tommy's software and this top place!
I have tcmp player and it works, but windows media player wont, I loaded the old wm5 codecs found here, still same.
How can I either get it working or delete the program?
It also keeps launching itself with "storage card inserted, search for video files"
I have d/l the kitchen files but not loaded yet, will that help?
Rgds
Ron

Ron173 said:
Hi
I'm new, trying hard.
I have the 2790b, successfully flashed wm6.1, thanks to tommy's software and this top place!
I have tcmp player and it works, but windows media player wont, I loaded the old wm5 codecs found here, still same.
How can I either get it working or delete the program?
It also keeps launching itself with "storage card inserted, search for video files"
I have d/l the kitchen files but not loaded yet, will that help?
Rgds
Ron
Click to expand...
Click to collapse
Welcome to the forum
Perhaps if you do a hard reset will wipe out the problem
By the way try to READ the Wiki
Hope it helps,

Hi,
hard reset no different.
read heaps... whats wiki?