Related
Please help!!!!!!!!!!! My bootloader is version 2.01. When I try to flash the radio nbf, it stops a 0%. When I reboot the screen say "No GSM and 1.30.76 WWE.
Everything else works on the jasjar.
Any assistance would be appreciated.
THANKS!!!!!!!!!!
cboy
cboy77 said:
Please help!!!!!!!!!!! My bootloader is version 2.01. When I try to flash the radio nbf, it stops a 0%. When I reboot the screen say "No GSM and 1.30.76 WWE.
Everything else works on the jasjar.
Any assistance would be appreciated.
THANKS!!!!!!!!!!
cboy
Click to expand...
Click to collapse
There are quite a few threads on this already. You may get a solution on any one of them. Try this for starters http://forum.xda-developers.com/showthread.php?t=296393
Hi there..can u let know how did u get No Gsm..accordingly the solution is there..in fact if uhv got no gsm after a radio upgrade then soln exists else u need to change the RF chip
Initially, I noticed that I was not having service when I should have. I would reboot (soft) and get service. Then suddenly one day there was no service at all. I rebooted and noticed it now said "No GSM". That is the situation I am in now.
Don't know what else to do. I have read all the threads. Wasn't sure if it was the bootloader version I have or If it is the device. As I said, everything else works perfectly on the Jasjar.
Any suggestions would be appreciated!!!
cboy77
Sounds to me simply like a corrupted radio installation.
Things to note are...
1. What version of bootloader? If pre 1.1, then upgrade, just saves complications with a lot of installs.
2. NO USB HUB. Very important and seems people are missing this.
3. Use original cable. This appears to be especially important when flashing Radio.
4. AS version should be 4.5 final release. If using Device Centre in Vista, make sure you have the updates installed from Microsoft Update and check the thread on upgrading in Vista.
5. Don't panic!!! It really takes quite a lot to brick your unit and there are usually simple fixes. Don't get too put off by hiccups, they'll be solved by a thread 9 times out of 10
6. (As a last resort!!!) If it does come to having to claim on your insurance... please please please reflash to your original providers rom and extROM before you send it back!!!!!!!
hdubli said:
Hi there..can u let know how did u get No Gsm..accordingly the solution is there..in fact if uhv got no gsm after a radio upgrade then soln exists else u need to change the RF chip
Click to expand...
Click to collapse
hi hdubli,
i'm having the same problem like of cboy77; the NO GSM thing. Like you said that there is solution of this if one had a bad radio flash. that i did...
i felt like i am getting poor signals and dropping call... so i tried to upgrade my radio from 1.13.00 to 1.14.10 and while it was being upgraded... it stopped at 66% with an error and happend to get NO GSM status in the begining and IMEI Lost. since then whenever i try to upgrade my radio rom; it freezes at 0%. However the Ext Rom and Win CE rom gets flashed with no problems at all... just the RADIO ROM that is creating fuss around here... could you help somehow!
Farehmani.
Help No GSM ERROR
I have tried everything in the wiki. Below is the information in my RUU log:
09:52:23:051 [msg] : Version : [2.11].
09:52:23:051 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
09:52:23:160 [msg] : MSystemFile Not Exist !
09:52:23:160 [msg] : CEFile Not Exist !
09:52:26:238 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
09:52:30:551 [msg] : Disconnect ActiveSync .... [2]
09:52:30:551 [msg] : Start Get Connect Port.
09:52:30:691 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
09:52:30:816 [msg] : Get Device Backup ID.
09:52:30:816 [msg] : Device BL VER : [2.01 ] [].
09:52:30:816 [msg] : Device ID Is Incompatible.
09:52:30:816 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
09:52:32:488 [msg] : Check Ac in BL mode. AC : [1]
09:52:33:988 [msg] : IsBL. BL : [1]
09:52:34:019 [msg] : =============================================
09:52:34:019 [msg] : START UpdateRadio !
09:52:41:348 [msg] : Check Radio Level 0 [704].
09:52:42:441 [msg] : RUpgrade 0 : 0 Start.
09:55:55:973 [err] : RWipe Data Error.
09:55:56:332 [err] : BL UpdateRadio Error.
09:55:56:332 [msg] : START UnInitialization !
09:55:56:332 [msg] : END UnInitialization !
09:55:56:348 [msg] : IsBL. BL : [1]
Any help in helping me to get pass ther RWipe error would be appreciated.
cboy
Universal Radio Rom Upgrade
I have tried for a few weeks to upgrade the radio rom. I have read all the threads and tried the fixes. None seem to work. I have copyied below the RUU Log:
15:39:35:894 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
15:39:39:932 [msg] : Disconnect ActiveSync .... [2]
15:39:39:932 [msg] : Start Get Connect Port.
15:39:40:089 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
15:40:05:728 [msg] : Device BL VER : [2.01 ] [].
15:40:05:728 [err] : Device CID Error.
15:40:05:728 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
15:40:42:450 [msg] : Check Ac in BL mode. AC : [1]
15:40:43:953 [msg] : IsBL. BL : [1]
15:40:43:984 [msg] : =============================================
15:40:43:984 [msg] : START UpdateRadio !
15:40:52:906 [msg] : Check Radio Level 0 [704].
15:40:54:487 [msg] : RUpgrade 0 : 0 Start.
15:45:36:433 [err] : RWipe Data Error.
15:45:36:903 [err] : BL UpdateRadio Error.
15:45:36:903 [msg] : START UnInitialization !
15:45:36:919 [msg] : END UnInitialization !
15:45:36:919 [msg] : IsBL. BL : [1]
It seems that I am getting an errow a the Wipe Data command and thereby the Update Radio Command.
If anyone can inform me how to overcome this error I would appreciate it.
Thanks in advance!!!!!
Cboy
Imate jasjar
BL. 201
1.30.76
cboy77 said:
15:40:05:728 [err] : Device CID Error.
Click to expand...
Click to collapse
Is your unit CID-unlocked? Check http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
Sorry, man, I'm just throwing things out here, don't really know what the answer is. Maybe it is the RF chip needs replacing
Help, Can't flash radio rom
Thanks for the suggestion. I think you may be right. It must be the hardware instead of software. Do you think I will be able to replace the RF chip without having to replace the complete board?
Thanks
First of all i am sorry for my bad English. I live in Russia and bought T-mobile MDA Pro in Germany. I dont know what ROM was in phone (i think that Pro_AKU2.0_05-2006 from oficial site of T-mobil in Germany). Phone was sim unlocked because i input one of my sim cards and phone work. But i need Russian language and i update my phone UNI_TMUK_130114_130232_11003_WWE_BL101_Ship
As i know this ROM update BL to 1.01
ALL was best. I see Congratulations do hard reset. BEST. My phone is work and it on English. I input anoser sim card and phone writ that it is invalid or missing card. I read in internet including this forum and know that it is radio. If apdate radio on 1.09 phone will work fine with both sim cards.
I try update radio, but ERROR 144 and nothing. I try a lot of radios and ROMs and nothing - ERROR 144 (or 114 i don't remember). It means that i coldn't update radio. In log file RUU all ok but in the end write that radio status "0".
All others parts of ROMs updates is perfectly. I install a lot of nk.nbf and ms_.nbf. I read in this forum that i may update old firmware ROM and unlocked, but i try update and nothing.
Also i try:
JASJAR_BL1.01_RUU_v1.2
HTC Universal SPL 1.2
359682-bl1.01_ruu_uni_v1.2
Universal_radio-1.13_(T-Mobile-German)
Universal-dump-radio-1.14.10.img
HTC_Uni_SIM_Unlock_v1
and nothing. MY RADIO is blocked.
Also i try mtty and comand task 28 55aa all successfully. My phone have black screen and not work. On forum write that this comand is clean phone and i may update by any rom. NOT.
I try any rom and nothing. ERROR 114. Radio update stopped.
I deleted radio.nbf from ROM and apdate WM6_21006_RUS_11500. ALL OK.
I start my phone. WM 6 started and i see that radio some as was early 1.10.03. My phone work with first sim card and not worked with second.
I dont update my radio. I'am crazy or my hand's crazy, but radio not update.
I NEED HELP.
NOW i have:
Microsoft Windows XP SP2
ActiveSync 4.5 ENG
ROM
2.10.06 RUS
03.11.07
1.10.03
42.44.P8
I don't know what i can do.
To my mind i don't stupid. I updete a lot of roms on Magician, Wizard, Prophet, Gene and all was best.
HELP ME, PLEASE!!!!!
14:53:38:015 [msg] : Version : [2.11].
14:53:38:031 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
14:53:38:687 [msg] : MSystemFile Not Exist !
14:53:38:687 [msg] : CEFile Not Exist !
14:53:41:921 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
14:53:46:015 [msg] : Disconnect ActiveSync .... [2]
14:53:46:015 [msg] : Start Get Connect Port.
14:53:46:234 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
14:53:51:562 [msg] : Device ID is Special .
14:53:57:796 [msg] : Check Ac in BL mode. AC : [1]
14:53:59:296 [msg] : IsBL. BL : [1]
14:53:59:328 [msg] : =============================================
14:53:59:468 [msg] : START UpdateRadio !
14:54:08:593 [msg] : Check Radio Level 0 [704].
14:54:10:187 [msg] : RUpgrade 0 : 0 Start.
14:58:59:437 [err] : RWipe Data Error.
14:59:00:078 [err] : BL UpdateRadio Error.
14:59:00:125 [msg] : START UnInitialization !
14:59:00:156 [msg] : END UnInitialization !
14:59:00:406 [msg] : IsBL. BL : [1]
Can any one provide a solution to this?
I cant upgrade the radio stack on my spvm5000 to 1.18. Always getting the error 114.
Tried everything on Uni Wiki. Still no resolution.
Rest of the ROM flashes work just fine. Problem only with radio upgrade.
Please help.
amitkarir said:
Can any one provide a solution to this?
I cant upgrade the radio stack on my spvm5000 to 1.18. Always getting the error 114.
Tried everything on Uni Wiki. Still no resolution.
Rest of the ROM flashes work just fine. Problem only with radio upgrade.
Please help.
Click to expand...
Click to collapse
If you already read here: http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
Try to reflash with another ROM
Hope it helps
Good luck and don´t forget to vote!
Hi and thanks for your time and prompt reply.
I have tried everything in the thread you mentioned, but to no avail.
Can you please direct me to another suitable ROM for spvm5000 G3 64M, incase you have any such link in mind?
1 more question. Do I need to run the unlock all utility b4 I run the radio rom upgrade?
Thanks
Amit
amitkarir said:
Hi and thanks for your time and prompt reply.
I have tried everything in the thread you mentioned, but to no avail.
Can you please direct me to another suitable ROM for spvm5000 G3 64M, incase you have any such link in mind?
1 more question. Do I need to run the unlock all utility b4 I run the radio rom upgrade?
Thanks
Amit
Click to expand...
Click to collapse
Try Tomal 8.5 here: http://forum.xda-developers.com/showthread.php?t=454906
Works perfect with 64Mb
Well I never run that unlock utility as I buy my Uni unlocked, if you havent unlocked never before or flashed any ROM yes, use it, if not all should be ok
Good luck,
Sorry have not been keeping touch lately..
Iv tried tomal 8.5, 8.7 and currently running on 8.8, all 3 are ecellent ROMs
But the radio flash gives me error 114 with all 3 ROMS.
Here is the exact output log for the update utility....hope it helps!!!
22:40:52:379 [msg] : Version : [2.11].
22:40:52:395 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
22:40:52:676 [msg] : MSystemFile Not Exist !
22:40:52:692 [msg] : CEFile Not Exist !
22:40:53:004 [msg] : Current in CE Mode.
22:40:59:333 [msg] : Device ID is Special .
22:40:59:333 [msg] : Device BL VER : [] [].
22:40:59:333 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
22:41:08:973 [msg] : Check Ac in CE mode. AC : [1]
22:41:08:973 [msg] : IsBL. BL : [0]
22:41:13:848 [msg] : Enter BL OK.
22:41:18:598 [msg] : Disconnect ActiveSync .... [2]
22:41:18:598 [msg] : Start Get Connect Port.
22:41:18:911 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
22:41:24:458 [msg] : Device ID is Special .
22:41:24:458 [msg] : Device BL VER : [1.01 ] [].
22:41:26:473 [msg] : =============================================
22:41:26:473 [msg] : START UpdateRadio !
22:42:01:239 [msg] : Check Radio Level 0 [704].
22:47:40:129 [msg] : RUpgrade 0 : 0 Start.
22:57:07:192 [err] : RWipe Data Error.
22:57:24:504 [err] : BL UpdateRadio Error.
22:57:24:520 [msg] : START UnInitialization !
22:57:24:567 [msg] : END UnInitialization !
22:57:35:348 [msg] : START UnInitialization !
22:57:35:348 [msg] : END UnInitialization !
Any ideas any one???
Anyone found a fix for this eventualy?
I've been having the same error and it's driving me crazy!!
Hi again all,
I am not feeling very well.
After more than a week of cursing and dissapointment I am about to give up, paint my XDA EXEC blue, throw it into the ocean and forget I ever bought it.
I have read almost every thread that reffers to my problem and I have tried everything I can but it seems that nothing is working for me...
I upgraded my CE ROM on my G4 device with the one from Luca and I was happy ever after.
Until one day, after I used the GPRS function on my phone, the device lost all radio information AND IMEI although I still got WiFi and BT.
What I have done for the past week cannot fit in this thread but I'll try to give you a rough list.
I have unlocked the extended ROM and made my device SuperCID
I have tried to flash the Radio ROM and I get error 114.
To manage to get the Radio updated I :
I tried with different Radio roms from the website (I think ALL of them)
I tried with different CE roms and all sorts of combinations with o2 Shipped ROMS as well
I tried to flash the same ROM 3 times
I tried to decode the Radio ROMS and re-encode it with my device info
I tried to run the wcecomm process before update
I entered the bootloader before the device boots and tried the upgrades
I took the battery out and restarted the phone 16 times (as I read in a thread somewhere)
I tried different operator CE ROMs
I tried different computers
Different USB cables
Different versions of Microsoft Active sync 4.1 and 4.5
but STILL ..... I can't update the Radio at all and my device shows No GSM at boot....
The log file from the RUU is below:
Code:
01:50:40:784 [msg] : Version : [2.11].
01:50:40:800 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
01:50:46:347 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
01:50:50:425 [msg] : Disconnect ActiveSync .... [2]
01:50:50:441 [msg] : Start Get Connect Port.
01:50:50:581 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
01:51:11:987 [msg] : Get Device Backup ID.
01:51:11:987 [msg] : Device BL VER : [2.01 ] [].
01:51:11:987 [msg] : Device ID Is Incompatible.
01:51:11:987 [msg] : Update Image. CE : [4], MSystem : [2], Radio : [1]
01:51:15:659 [msg] : Check Ac in BL mode. AC : [1]
01:51:15:659 [msg] : IsBL. BL : [1]
01:51:17:691 [msg] : =============================================
01:51:17:691 [msg] : START UpdateRadio !
01:51:25:144 [msg] : Check Radio Level 0 [704].
01:51:26:300 [msg] : RUpgrade 0 : 0 Start.
01:55:13:644 [err] : RWipe Data Error.
01:55:13:987 [err] : BL UpdateRadio Error.
01:55:14:034 [msg] : START UnInitialization !
01:55:14:050 [msg] : END UnInitialization !
01:55:38:206 [msg] : START UnInitialization !
01:55:38:222 [msg] : END UnInitialization !
I see these lines in my sleep!!!!:
01:55:13:644 [err] : RWipe Data Error.
01:55:13:987 [err] : BL UpdateRadio Error.
I googled and googled and googled.....NOTHING WORKS!
So, since I can't find any other solution, the only thing left for me to do is install the original CE rom from O2. And I guess, this is Xda_Exec_Upgrade_v113188.exe
But when I install the ROM and boot the device, the screen has a fuzzy colour and the device won't boot up. (I have attached a screenshot.)
Why .. WHY ... WHY WHYYYY???
Now Xda_Exec_Upgrade_v1.30.162 works on my phone (the radio still doesn't get updated) but still .. my Radio is not recognised...
Is there anything else I can do? Can I upgrade the radio from the SD card? Or use MTTY to flash the radio?
Or shall I burn the f*cking thing and enjoy the fireworks?
Please give me some advice, I am desperate.......
xxGeNxx
Have patience
Read here:
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
It worked for me on similar situation
Hope it helps,
Hi Orb,
Thanks for your reply man I appreciate it.
I tried task 28 but apparently it doesn't delete the Radio ROM. Only the CE and EXT ROMs.
Anyway, I did it but still, radio doesn't get updated.
The original O2 rom V1.13 gets updated but it's still a fuzzy screen.
Isn't there a way to use the an SD card to update the Radio ROM ?
And why doesn't 1.13 ROM work on my XDA?
Bad luck!!!
It seems your processor are damaged, When you load something in NV RAM (specially OS) the processor still streessed. May be your processor was foulty. In the problem with radio upgrade, i think you did upgrade a wrong radio.nbf may be you used a radio upgrade from another model device
mmmh..
Try to put the UNI in Bootloader mode (if you can do this your ROM memory still works) then: erase all in NV RAM with MTTY, use task 28 55aa, and then load a original ROM....this work for me in a "error xxx" problems.
AIN1 said:
It seems your processor are damaged, When you load something in NV RAM (specially OS) the processor still streessed. May be your processor was foulty. In the problem with radio upgrade, i think you did upgrade a wrong radio.nbf may be you used a radio upgrade from another model device
Click to expand...
Click to collapse
Hi AIN1, thanks for replying.. I really need all the help I can get.
The screen is fuzzy only when I load the speciffic o2 rom V1.13 so I don't think it's the processor. If I load **any** other ROM, the Uni boots OK but I only have WiFi and Bluetooth. No GSM.
I did not update the Radio ROM at any point! The phone was working on WM6 and my old Radio ROM until I used GPRS and then it got stuck.
AIN1 said:
Try to put the UNI in Bootloader mode (if you can do this your ROM memory still works) then: erase all in NV RAM with MTTY, use task 28 55aa, and then load a original ROM....this work for me in a "error xxx" problems.
Click to expand...
Click to collapse
Even with this strange screen, the device device still enters the BootLoader and I can still Flash the device to any other CE or EXT ROM I want.
I DID erase all the NV RAM with MTTY and reinstalled the original O2 shipped ROM (I **think** it's version 1.13 , at least thats the earliest I could find on the forum) but this is the ROM that gives me the fuzzy screen. No other ROM does it....
I have a feeling your mainboard is partially fried.
enigma1nz said:
I have a feeling your mainboard is partially fried.
Click to expand...
Click to collapse
Partially fried? Even if all the other ROMs are working on my phone and I have BT and WiFi? From WM5 to WM6.5 no other ROM shows that screen. Hell, even the next O2 upgrade ROM works (V1.30) ok in my phone..
try flashing this original O2 radio
i guess this might work its O2 original radio version 1.09 good luck
habarta said:
i guess this might work its O2 original radio version 1.09 good luck
Click to expand...
Click to collapse
Hmm.. That would be cool but I can't upgrade the Radio RoM. I get 114 Radio Error
i'm trying to upload
here u go
combine contents of two zip folders
after DOC reset put uni in bootloader mode
then try this radio only flash
http://rapidshare.com/files/258735028/radio.zip.html
Oh here is another way of doing it... when you flash any other CE rom just add the radio.nbf in the package and flash it... it should flash both CE rom and radio rom.... and did you try to change the sim card to see if that's faulty or not ???
habarta:
I ran MTTY, did the DOC erase and this is the log:
Code:
task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2900000
All Size: 0x7400000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0x4B00000
USB>
Then, I tried to flash the radio with the original one you sent but i still get Radio error 114.
Code:
23:10:28:831 [msg] : Version : [2.11].
23:10:28:831 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
23:10:29:019 [msg] : MSystemFile Not Exist !
23:10:29:034 [msg] : CEFile Not Exist !
23:10:32:175 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
23:10:36:300 [msg] : Disconnect ActiveSync .... [2]
23:10:36:300 [msg] : Start Get Connect Port.
23:10:36:456 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
23:10:57:862 [msg] : Get Device Backup ID.
23:10:57:862 [msg] : Device BL VER : [2.01 ] [].
23:10:57:862 [msg] : Device ID Is Incompatible.
23:10:57:862 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
23:11:03:753 [msg] : Check Ac in BL mode. AC : [1]
23:11:03:753 [msg] : IsBL. BL : [1]
23:11:05:784 [msg] : =============================================
23:11:05:784 [msg] : START UpdateRadio !
23:11:13:253 [msg] : Check Radio Level 0 [704].
23:11:14:378 [msg] : RUpgrade 0 : 0 Start.
23:14:41:284 [err] : RWipe Data Error.
23:14:41:628 [err] : BL UpdateRadio Error.
23:14:41:659 [msg] : START UnInitialization !
23:14:41:659 [msg] : END UnInitialization !
What is that 23:10:57:862 [msg] : Device ID Is Incompatible. crap i still don't know........ But even when I successfuly flsh the CE and EXT rom even though I still get it, the upgrade completes fine...
Attached log
Code:
23:24:04:644 [msg] : Version : [2.11].
23:24:04:659 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
23:24:04:675 [msg] : RadioFile Not Exist !
23:24:09:675 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
23:24:13:769 [msg] : Disconnect ActiveSync .... [2]
23:24:13:769 [msg] : Start Get Connect Port.
23:24:13:925 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
23:24:14:050 [msg] : Get Device Backup ID.
23:24:14:050 [msg] : Device BL VER : [2.01 ] [].
23:24:14:050 [msg] : Device ID Is Incompatible.
23:24:14:050 [msg] : Update Image. CE : [4], MSystem : [2], Radio : [0]
23:24:16:597 [msg] : Check Ac in BL mode. AC : [1]
23:24:16:597 [msg] : IsBL. BL : [1]
23:24:18:612 [msg] : =============================================
23:24:18:628 [msg] : START UpdateExtended !
23:24:19:706 [msg] : Upgrade 2 : 0 Start.
23:24:26:550 [msg] : Upgrade 2 : 0 End.
23:24:26:550 [msg] : Upgrade 2 : 1 Start.
23:24:33:519 [msg] : Upgrade 2 : 1 End.
23:24:33:534 [msg] : Upgrade 3 : 2 Start.
23:24:37:097 [msg] : Upgrade 3 : 2 End.
23:24:40:612 [msg] : END UpdateExtended !
23:24:44:628 [msg] : =============================================
23:24:44:644 [msg] : START UpdateCE !
23:24:45:691 [msg] : Upgrade 2 : 0 Start.
23:24:52:284 [msg] : Upgrade 2 : 0 End.
23:24:52:284 [msg] : Upgrade 2 : 1 Start.
23:24:59:519 [msg] : Upgrade 2 : 1 End.
23:24:59:519 [msg] : Upgrade 2 : 2 Start.
23:25:07:050 [msg] : Upgrade 2 : 2 End.
23:25:07:050 [msg] : Upgrade 2 : 3 Start.
23:25:13:987 [msg] : Upgrade 2 : 3 End.
23:25:13:987 [msg] : Upgrade 2 : 4 Start.
23:25:21:128 [msg] : Upgrade 2 : 4 End.
23:25:21:144 [msg] : Upgrade 2 : 5 Start.
23:25:28:222 [msg] : Upgrade 2 : 5 End.
23:25:28:222 [msg] : Upgrade 2 : 6 Start.
23:25:36:456 [msg] : Upgrade 2 : 6 End.
23:25:36:456 [msg] : Upgrade 2 : 7 Start.
23:25:43:331 [msg] : Upgrade 2 : 7 End.
23:25:43:331 [msg] : Upgrade 2 : 8 Start.
23:25:50:081 [msg] : Upgrade 2 : 8 End.
23:25:50:081 [msg] : Upgrade 2 : 9 Start.
23:25:56:878 [msg] : Upgrade 2 : 9 End.
23:25:56:878 [msg] : Upgrade 2 : 10 Start.
23:26:04:425 [msg] : Upgrade 2 : 10 End.
23:26:04:425 [msg] : Upgrade 2 : 11 Start.
23:26:17:894 [msg] : Upgrade 2 : 11 End.
23:26:17:894 [msg] : Upgrade 2 : 12 Start.
23:26:25:925 [msg] : Upgrade 2 : 12 End.
23:26:25:925 [msg] : Upgrade 2 : 13 Start.
23:26:33:581 [msg] : Upgrade 2 : 13 End.
23:26:33:581 [msg] : Upgrade 2 : 14 Start.
23:26:41:956 [msg] : Upgrade 2 : 14 End.
23:26:41:956 [msg] : Upgrade 3 : 15 Start.
23:26:50:269 [msg] : Upgrade 3 : 15 End.
23:27:12:612 [msg] : END UpdateCE !
23:27:14:612 [msg] : START FormatExtended !
23:27:15:191 [msg] : END FormatExtended !
23:27:15:191 [msg] : START BackCEMode !
23:27:15:253 [msg] : END BackCEMode !
23:27:15:253 [msg] : START UnInitialization !
23:27:15:269 [msg] : END UnInitialization !
What I noticed, is that I have a different FAT2 size.
As you can see from the screenshot taken from the MTTY post, the guy's FAT2 size is 0x2C70000 and mine is 0x2900000.
Does that make a difference?
I can't thank you enough for your replies everyone...
rajivshahi said:
Oh here is another way of doing it... when you flash any other CE rom just add the radio.nbf in the package and flash it... it should flash both CE rom and radio rom.... and did you try to change the sim card to see if that's faulty or not ???
Click to expand...
Click to collapse
Hi rajivshahi,
Yes, I did that already but when I include any Radio ROM in the update of the CE and EXT flash, the software fails on the Radio rom still..
No GSM comes when the device is booting WM6, I don't think whether the SIM is in or not would make a difference (?) [correct me if I'm wrong]
sim should not be in it's a must
I correct my grammar.
No GSM has nothing to do with the SIM. The SIM is working fine..
I have to say I am one step closer to (see attached).............
habarta said:
sim should not be in it's a must
Click to expand...
Click to collapse
I think what he means is that when you flash the radio you should remove the SIM card before you do it. I've always seen this instruction written down. And the wiki also suggests to do a ROM update without a SD card in if you are using the tethered method.
I suppose you've already followed this: http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
Make sure you use the latest ROMUpgradeUt.exe available.
Also, if you tried the radio ROMs here and had no luck, I don't know what else you can try. Sorry.
wovens said:
I think what he means is that when you flash the radio you should remove the SIM card before you do it. I've always seen this instruction written down. And the wiki also suggests to do a ROM update without a SD card in if you are using the tethered method.
I suppose you've already followed this: http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
Make sure you use the latest ROMUpgradeUt.exe available.
Also, if you tried the radio ROMs here and had no luck, I don't know what else you can try. Sorry.
Click to expand...
Click to collapse
Hello,
I always remove the SD and the SIM before the upgrades.
Unfortunately I tried all the radio roms in the FTP folder.
I think there's not anything wrong with the ROMs themselves, it's just the fact that the RUU can not delete the older Radio ROM
Code:
23:14:41:284 [err] : RWipe Data Error.
23:14:41:628 [err] : BL UpdateRadio Error.
Can someone update their ROM and post the logfile for me please?
Hi all,
I happen to have a Qtek 9000 or a HTC Universal
and a few weeks ago I was trying to install a new rom for my phone... (i've done ir before and it all went well) but this rom almost kill my phone, i only can enter the bootloader...
i download all tomal's roms and other ones but when it starts to install... i installs til 60%
the screen is like full of colors, i have pictures but because i'm a new user i don't know...i can't put links here :S
please help! thanks in advance
PD: sorry for my English, i'm from Uruguay
-
the error that appears when the rom is installing is:
error 113 extended rom update error
i've fix it!!! with mtty comand: task 28 55aa
i'm so happy!
Yes, that or Doc format help in most of the cases.
Very documented on the Wiki.
Glad to know you have it back
i'm sorry if i am writting in the wrong place, but.. after i make it work... it shows NO GSM....it has no radio version, or protocol, or IMEI... do you know how to fix this? Thanks
i've tried this: UNI_Radio (which is in the wiki) and didn't work.... then i tried this: Uni_Simlock_by_Buzz_and_team ... and i can't complete step 5... when i run MaUpgradeUt_noID.exe it never ends.... it always gets stuck at 0%
Thanks for any help
Reading and searching is the key:
http://forum.xda-developers.com/showthread.php?t=567017
Thanks!!! i've been searching and found this: http://forum.xda-developers.com/showpost.php?p=4944998&postcount=1 but i don't know how to do it ... can you help me understand? or give me a link which shows the steps.... thanks again
Read here:
http://forum.xda-developers.com/showthread.php?t=301662
sorry to ask you some mucho about this things... but i'm freaking out... i really don't know how to use the UniversalRUU.... i have to put the .nbf radio file in the same folder?.... and run it? if so... it doesn't work for me... i'm so confussed...
please help me
and after i do the way i tell you... it got stuck in bootloader.... fortunately i could fix it
please help me with the other issue
THANKSSS
this is my RUU.log file:
Code:
01:08:57:750 [msg] : Version : [2.11].
01:08:57:750 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
01:08:57:812 [msg] : MSystemFile Not Exist !
01:08:57:812 [msg] : CEFile Not Exist !
01:08:57:859 [msg] : Current in CE Mode.
01:09:02:203 [msg] : Device BL VER : [] [].
01:09:02:203 [err] : Device CID Error.
01:09:02:203 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
01:09:05:390 [msg] : Check Ac in CE mode. AC : [1]
01:09:05:390 [msg] : IsBL. BL : [0]
01:09:09:937 [msg] : Enter BL OK.
01:09:13:968 [msg] : Disconnect ActiveSync .... [2]
01:09:13:968 [msg] : Start Get Connect Port.
01:09:14:140 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
01:09:35:937 [msg] : Get Device Backup ID.
01:09:35:937 [msg] : Device BL VER : [1.01 ] [].
01:09:35:937 [msg] : Device ID Is Incompatible.
01:09:37:937 [msg] : =============================================
01:09:37:937 [msg] : START UpdateRadio !
01:09:45:437 [msg] : Check Radio Level 0 [704].
01:09:46:515 [msg] : RUpgrade 0 : 0 Start.
01:13:00:078 [err] : RWipe Data Error.
01:13:00:421 [err] : BL UpdateRadio Error.
01:13:00:421 [msg] : START UnInitialization !
01:13:00:421 [msg] : END UnInitialization !
01:16:44:812 [msg] : START UnInitialization !
01:16:44:812 [msg] : END UnInitialization !
i'm borroving this thread for my similar problem, i tried to upgrade rom, and now it's stuck at boot and it seems like there are no windows in there, and RUU wont do a thing, becouse it wont detect my Uni's versions and it puts some error and goes to the recovery, but there it endlessy does nothing =( i've already tried most of rom files and always the same thing. any ideas please?
problem
i don' t know what is happened to my universal... it doesent boot anymore... and i cant go to the bootloader mode... when i connect it to the computer in comes only two textes: USB ant v1.01... can someone help me?
sorry for my english i'm from italy
EDIT: when i try for example to install tomal' s rom v8.7 i have error 112 CE error update.. wat is it??
Welcome to forums
Have a read on my signature link, you may try Doc format or MTTY tool.
Hope it helps