Related
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
If some one can get the password for the rom, I can try to extract the cab.
I would try the same ones used for the MDAIII rom. itsme was the one that came up with the passwords.
Well paul, I'm not going to go fishing for them. So if you want to post them or pm me with them great otherwise. :arrow: :twisted:
HP ROM is not locked!
Guys,
I just opened the HP nk.nbf file and it is not locked, so no password is needed.
Mikee4fun,
Since it is unlocked, can you pull out the cab for the media player 10?
Instructions and names of tools would work also, thanks for any and all help.
Paul.
Re: Windows Media Player 10 MobileROM .nbf file found on HP
paulmc said:
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
Click to expand...
Click to collapse
I've been trying to download this file, but it always says file not found on the server...
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Re: Windows Media Player 10 MobileROM .nbf file found on HP
ZeroXtreme said:
I've been trying to download this file, but it always says file not found on the server...
Click to expand...
Click to collapse
This is no good. I've downloaded the SP29295.exe and dumprom the nbf file. It confirms my suspicion that it is an update of the HP iPAQ rx3700 OS files (including WMP10 mobile) and not just individual CAB files.
Unless someone can tell me what are the exact files in the WMP10? I've tested using other versions of ROM, and it seems like I've invariably replace files that affects the core integrity of the OS.
However, I still harbour the fantasy that we might port this stuff over to XDA2.
If you can't get to the right URL link, search at google with the following search string:
"HP iPAQ rx3700" "mobile media companion" update
My link:
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Paul, the windows media 10 is not a cab install rather a part of the windows mobile 2003 se system. It would require someone to go find all the dll files, registry setting and core file install directory contents to make the whole thing work.
Mike
twinkle said:
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Click to expand...
Click to collapse
Got it, thanks.
RE
Hope that somebody could come out with a cab file for separate installation.
:roll:
lets just hope someone can rip the entire se OS from another device and make it work on XDAII. The 2.02, 2.06 and 2.20.07CHS (translated) are getting their bit by bit...
any got wmp 10 from the rom then pls do share.
thanks
jeet
list the dll files u need and i'll help u to get them coz i have i-mate jam ROM and i'v extracted all rom filed includes all exe and dll files
all i need a list of needed files 8)
I think the lack of knowledge on the files pretaining to Windows Media Player 10 are ther reason why someone is going to have to have a copy of the ROM and go routing about for the files.
Loading rx3700 nbf file into ER2003Edit asks for a password. Is there any way to find that password?!
installing WMP 10 to XDAII
hi guys!
-can someone tell me,is it posible to install WMP 10 to myxdaII?
-Thank you in advance
Hello,
I noticed that Microsoft has just released translated version of the Windows Mobile 6 emulator images.
I tried to copy some files from the WM6 Pro French ROM (especially *.mui files) to add them into my cooked ROM to make a "french" ROM. It seams to work but the thing is that I'm able to extract only few files from ROM, I don't have permissions to copy the other files.
Is there any way to extract any ROM file from emulator image? I tried to copy them using Total Commander, Resco Explorer, RAPI, itsutils, without success... the problem occurs always with the same files. I noticed that many mui files were in used by system processes, that should be the problem.
It would be great if anyone knows how to get a file in emulator image !
Thanks.
Hi ALL,
black 3 is based on the build and kernel that the windows mobile SDK refresh was updated for.....
and where is this balck3.0?
jasjamming said:
Hi ALL,
black 3 is based on the build and kernel that the windows mobile SDK refresh was updated for.....
Click to expand...
Click to collapse
Is there also a Dutch SDK version?
If there is..we need to cook one for the hermes
leoiden said:
and where is this balck3.0?
Click to expand...
Click to collapse
it was reported to be out in 2 weeks' time.
jasjamming said:
Hi ALL,
black 3 is based on the build and kernel that the windows mobile SDK refresh was updated for.....
Click to expand...
Click to collapse
Wow it seems really interesting! Could we also expect localized versions of your ROM to come out?
Could you tell me how to get those files from SDK images?
schaps said:
Hello,
I noticed that Microsoft has just released translated version of the Windows Mobile 6 emulator images.
I tried to copy some files from the WM6 Pro French ROM (especially *.mui files) to add them into my cooked ROM to make a "french" ROM. It seams to work but the thing is that I'm able to extract only few files from ROM, I don't have permissions to copy the other files.
Is there any way to extract any ROM file from emulator image? I tried to copy them using Total Commander, Resco Explorer, RAPI, itsutils, without success... the problem occurs always with the same files. I noticed that many mui files were in used by system processes, that should be the problem.
It would be great if anyone knows how to get a file in emulator image !
Thanks.
Click to expand...
Click to collapse
Hi.
Can you put the link to localiced emulator images? i'm looking for spanish one to see how to traslate the WM6 to.
Thanks.
jcespi2005 said:
Hi.
Can you put the link to localiced emulator images? i'm looking for spanish one to see how to traslate the WM6 to.
Thanks.
Click to expand...
Click to collapse
here you go....
link:
http://www.microsoft.com/downloads/...26f-a913-4f370a65a582&DisplayLang=en#filelist
chaos42 said:
here you go....
link:
http://www.microsoft.com/downloads/...26f-a913-4f370a65a582&DisplayLang=en#filelist
Click to expand...
Click to collapse
Thanks man...downloading now...
Regards.
jasjamming said:
Hi ALL,
black 3 is based on the build and kernel that the windows mobile SDK refresh was updated for.....
Click to expand...
Click to collapse
Can you make a short explain on how to extract files from the emulator (if this is the way you obtain the files for Black 3) ?
Thanks man.
Launch the emulator and configure it run with Active Sync.
I did this some time back to extract the sound files from the old PPC2003 image. (There may be a much easier way. Active Sync is also very slow for transferring all the files in the ROM.)
abubasim said:
Launch the emulator and configure it run with Active Sync.
I did this some time back to extract the sound files from the old PPC2003 image. (There may be a much easier way. Active Sync is also very slow for transferring all the files in the ROM.)
Click to expand...
Click to collapse
I'll give a try and report here...
Thanks.
schaps said:
Wow it seems really interesting! Could we also expect localized versions of your ROM to come out?
Could you tell me how to get those files from SDK images?
Click to expand...
Click to collapse
no i didnt get he files from the SDK images.
the SDK images were updated to suit the ROM Build and KERNEL of black 3.
think about it.....
jasjamming said:
no i didnt get he files from the SDK images.
the SDK images were updated to suit the ROM Build and KERNEL of black 3.
think about it.....
Click to expand...
Click to collapse
Understanded.
But the really port that open the localiced images for us is the posibility to traslate one ROM (black 3.0, for instance) into any language, if i am not wrong.
Regards.
jasjamming said:
black 3 is based on the build and kernel that the windows mobile SDK refresh was updated for.....
Click to expand...
Click to collapse
actually i ve had these images for a few weeks or so.. the build in the sdk refresh is exactly one build lower than our current release.
using this build would be a step backwards..
abubasim said:
Launch the emulator and configure it run with Active Sync.
I did this some time back to extract the sound files from the old PPC2003 image. (There may be a much easier way. Active Sync is also very slow for transferring all the files in the ROM.)
Click to expand...
Click to collapse
Hi again.
I connected the emulator with PC using ActiveSync, but isn't possible to copy all the files in the ROM, cause same of them are blocked by the system if i access trought AS.
Is there any other way to extract all the content of the .BIN image?
Thanks and sorry for my insistence, but this emulator image can give me a chance to put WM6 in spanish
How to extract the files from an image emulator for noobs:
1- Dowload the images that you want here:
http://www.microsoft.com/downloads/...26f-a913-4f370a65a582&DisplayLang=en#filelist
2- Install them in your computer.
3- Take the image that you want from the installation folder.
For example, if you have downloaded the images for ESN language look in the folder "C:\Archivos de programa\Windows Mobile 6 SDK\PocketPC\Deviceemulation\0C0A":
The image for Hermes is: PPC_ESN_GSM_VR.BIN (I'm not 100% sure)
- Download Tadzio's imgfs excelent tools in:
http://forum.xda-developers.com/showthread.php?t=298327
- Unzip the tools along with the image in any folder.
- Rename the image to A.BIN (to make the next commands easier to type).
- Open a D.O.S. command window and perform these commands:
> NBSPLIT -emu A.BIN
(it generates two files: A.BIN.EXTRA and A.BIN.PAYLOAD)
> IMGFSFROMNB A.BIN.PAYLOAD IMGFS.BIN
(it generates the file IMGFS.BIN)
> IMGFSTODUMP IMGFS.BIN
And that's all. Files are dumped in /Dump directory. NOW IT'S TIME TO TRANSLATE!!!!!!!!!!!!!
ey man, glad to see you here
Thanks.
Edit: A little advice, in the great last post by VivaErBetis, when i use NBSplit, i must put -emu in small to work.
WHOOOOOOT DUTCH ALSO!!
Gonna try this..
but not now im going away for a few days..
dutty said:
actually i ve had these images for a few weeks or so.. the build in the sdk refresh is exactly one build lower than our current release.
using this build would be a step backwards..
Click to expand...
Click to collapse
maybe i am mistaken then........
the build i have is the latest one available, its only 4 days old.
I have original rom form o2 and I would like to decode it, to get office app. Rom is delivered as single .exe file. Does anyone know what to do to get .nbf files from .exe or maybe there is other way to get mobile office.
Winrar... Right click on .exe and select extract to here.
Psi
qrac said:
I have original rom form o2 and I would like to decode it, to get office app. Rom is delivered as single .exe file. Does anyone know what to do to get .nbf files from .exe or maybe there is other way to get mobile office.
Click to expand...
Click to collapse
Here is it. Ready to use Only for WM5(does not contain onenote)
Code:
http://rapidshare.com/files/59828257/office.zip.html
PsiDOC said:
Winrar... Right click on .exe and select extract to here.
Psi
Click to expand...
Click to collapse
This ll extract only the nbfs and upgrade utils
I know mate. Thats what he asked for in the question. I thought he had the tools to extract from the rom itself.
Psi
thx for help. Is there any version of office for wm 6.0 ?
I tried m9editor and ManilaEditor 0.2, and both canceled trying to install them. Could it be that I have TouchFlo V3? Is there another editor for V3?
Thanks in advance.
cbasualdo said:
I tried m9editor and ManilaEditor 0.2, and both canceled trying to install them. Could it be that I have TouchFlo V3? Is there another editor for V3?
Thanks in advance.
Click to expand...
Click to collapse
where were you trying to install them? on the phone? you do know that these 2 apps are to be used on your PC, right? i don't recall an installation process for the PC. i simply copied to a folder on my PC and created a shortcut to launch the apps.
Thanks Cortez, at first I didn't know that m9editor was supposed to be run in the pc. I tried it but again it returns an error code: 0xc0000135.
Same error happens with Manila Editor 0.2.
cbasualdo said:
Thanks Cortez, at first I didn't know that m9editor was supposed to be run in the pc. I tried it but again it returns an error code: 0xc0000135.
Same error happens with Manila Editor 0.2.
Click to expand...
Click to collapse
don't know for sure but you might have to install the Microsoft .Net software from MS. check the threads that support both tools to confirm my suggestion.
Are you saying there is a .NET 3.5 framework for the PC???
What I have and installed was a .cab for the phone. I'll check it ...
Hi,
The attached cab file contains an exe file, common to all wp7 roms.
It is verified that can be sent with an e-mail and then can be downloaded to the e-mail sender windows phone device.
There is no need for any other app in order to do the task, you can try it, it is completly safe.
Regards, ansar.
can we do this for all cabs ? i mean XAPs ?
hdubli said:
can we do this for all cabs ? i mean XAPs ?
Click to expand...
Click to collapse
Hi,
Did not try it yet but i think it will have no problem.
With xap in order to work one should include the required .xml files too.
May be it is important to test if hubs can also be passed this way, although are large sized.
But if it works for hubs etc, other brand devices like Samsung can be benefit too.
Regards, ansar.
ansar.ath.gr said:
Hi,
The attached cab file contains an exe file, common to all wp7 roms.
It is verified that can be sent with an e-mail and then can be downloaded to the e-mail sender windows phone device.
There is no need for any other app in order to do the task, you can try it, it is completly safe.
Regards, ansar.
Click to expand...
Click to collapse
whats the use of this? its not installable
blutz said:
whats the use of this? its not installable
Click to expand...
Click to collapse
Same thing here...
It's a the Windows Phone 7 forum, not the Windows Mobile 6.x forum.
Thanks
victorc2 said:
It's a the Windows Phone 7 forum, not the Windows Mobile 6.x forum.
Thanks
Click to expand...
Click to collapse
Have you read it right the first post of Ansar??
Maybe not but I can't install it on my WP7 device.
If I remember .cab is executable program for WM6.x
So I don't understand why he put it here if it's not installable.
WP7 cabs
Hi,
For your info, in all windows phone 7 ROMs there are 2 cab files included, these:
1. In OEM packages there is a special package (folder) named OEM_8x50_OS
... Inside this package there is the 1st cab named oemavatar.cab
2. In SYS packages there is a special package (folder) named MSAvatar
... Inside this package there is the 2nd cab named msavatar.cab
Both cabs have been verified that can e-mailed and then downloaded in the window phone 7 device.
The cab i included in the attachment in post #1 is made by me for testing purposes.
It includes an exe file that there is already inside the ROM of any windows phone 7 device.
It is also tested that the famus Totalcmd.cab can also be e-mailed and downloaded by the device.
Of course Total Commander cannot be executed by the wp7 device due to its header that is addressed to wm devices.
Next tests will include xap files like those of the system xap that are responsible for the Metro UI.
Regards, ansar.
"Can't open atachment
The file you are attempting to open is not a permitted file type"
ceesheim said:
"Can't open atachment
The file you are attempting to open is not a permitted file type"
Click to expand...
Click to collapse
Hi,
This is due when you try a second time, not the first one.
Regards, ansar.
ansar.ath.gr said:
Hi,
For your info, in all windows phone 7 ROMs there are 2 cab files included, these:
1. In OEM packages there is a special package (folder) named OEM_8x50_OS
... Inside this package there is the 1st cab named oemavatar.cab
2. In SYS packages there is a special package (folder) named MSAvatar
... Inside this package there is the 2nd cab named msavatar.cab
Both cabs have been verified that can e-mailed and then downloaded in the window phone 7 device.
The cab i included in the attachment in post #1 is made by me for testing purposes.
It includes an exe file that there is already inside the ROM of any windows phone 7 device.
It is also tested that the famus Totalcmd.cab can also be e-mailed and downloaded by the device.
Of course Total Commander cannot be executed by the wp7 device due to its header that is addressed to wm devices.
Next tests will include xap files like those of the system xap that are responsible for the Metro UI.
Regards, ansar.
Click to expand...
Click to collapse
the cabs on the rom are not installable CE cabs,.. they are plain archives, but they are also cannot be opened with your method.
do you know something we don't?
ceesheim said:
"Can't open attachment
The file you are attempting to open is not a permitted file type"
Click to expand...
Click to collapse
I have the same message.
If I put it in a zip file I've got an error that can be translate as "Unable to open file. It may be damaged or of an unsupported type."