Hi,
I have an Wizard with IPL /SPL 1.05, I unlock CID, then upgraded to AK2U rom(IPL/SPL 2.17), then tried CID unlock with lokiwiz, unlocking failed with error:...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - internal error.
Click to expand...
Click to collapse
However, I still can 2sd all & write back the full rom.
So, my thinking is :
1) once the CID is unlocked, we can flash the pda with any rom & the cid remain unlocked after flashing.
2)To change language on AK2U rom,I think we can tried to downgrade the rom into IPL/SPL 1.xx, by using a same country/brand rom. e.g. downgrade a German Qtek AK2U rom with a German Qtek 1.xx rom, then unlock cid, we might be able to flash it into any other language/brand.
3) But what is the reason for the cid unlock fail? Is it due to the 2.xx IPL or 2.xx SPL? Or due to the os version? or combination of some/all reason?
4) Is the CID lock located in the IPL? or SPL? or OS?
Related
HI!
Have a question how could I see the phones cid?
hoho?
also the modell id, cid, etc
Its just so i can do a nbh signed for my version =)
thanks if you could help
Its for sweden 3 branded htc
I dont think you can see the cid, however a hardspl will disable the cid so you will be able to install any rom,,, you can also unlock the cid using software.. search forum for software
Hi to all , I found a new release of 2.03 rom for Israel , but they said that the rom can be flashed only if you bought the phone from them and when flashing it checks the IMEI number .
I tried to flash it and it gave me an error, so I went back to the old rom .
Is there someone who can help with getting out this IMEI check from the rom?
The link for this rom: http://rapidshare.com/files/201931770/RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
it doesn't check the IMEI but the CID (carrier ID) of the device.
You can do 2 things:
You can superCID it (giving it an master CID) so you can flash all OFFICIAL(only official) diamond ROMs.
This can be done with the olinex unlocker.
Or
You can flash the Hard SPL, which allows you to flash any diamond ROM to your device.
There is a sticky presenting several Hard-SPL versions.
Good luck and have fun.
I have Olinex SPL 1.40
do I need something else?
you'd need an unsigned H-SPL to flash the official ROM (is the version you are using signed or unsigned?)
Unsigned Hard SPL Diamond OliNex
in the bootloader it shows the following:
Security Unlocked
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Now it shouldn't be any problem to flash the WWE-ME ROM.
Try flashing it from internal storage (diamimg.nbh method)
Good luck,
EqX
I tried to flash it with the RUU and it gave me an error ,
do you think that if I'll flash it from the internal storage it would be ok?
P.S.
I tried to flash with RUU after I flashed the Unsigned Hard-SPL.
The ruu doesn't play nice..
unzip the exe
the big signed.nbh file is your image.
Then follow the instructions on:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Regards,
EquinoXe
Thanks , it worked.
You're welcome.
Regards,
EqX
Hi ;
Is it possible to upgrade, downgrade or reformat to bootloader?
My bootloader says 1.30.0000 is it possible to change this by the way cid unlock?
Thank you
Why do you want to change the bootloader ?
Thak you for reply;
I have cid lock and my device in bootloader mode I have to find original rom but I can not find if I can reformat or change bootloader may cid lock can delete. Just I am thinging.
hello,
i have a htc touch diamond from vodafone german, it was sim unlocked when i had it. now i wanna to upgrade to wm6.5.
questions
1- can i upgrade to a custom wm6.5 rom becasue it was simlockfree when i had it. hence i think there was no simlock therefore i can upgrade to a custom rom.
2-how can i know whether touch diamond has a cid , securty locked?
thx for answering
Go in bootloader mode (SOFT RESET + VOL UP)
If in SPL there's the word "Olinex", your cid is unlocked
SubSeven93 said:
Go in bootloader mode (SOFT RESET + VOL UP)
If in SPL there's the word "Olinex", your cid is unlocked
Click to expand...
Click to collapse
Actually your bootloader will say OliNex and the version.
If it doesn't, don't flash any roms as it means your device is not Hard SLP which is what protects your phone from getting destroyed.
Mine say's security unlocked in RED on the top of bootloader screen and spl-1.40.OliNex
wapvirus said:
Mine say's security unlocked in RED on the top of bootloader screen and spl-1.40.OliNex
Click to expand...
Click to collapse
You should update your Hard SPL to 1.93 found in my signature.
as i said the touch diamond was simlockfree when i bought it. also every touch diamond is securty locked? doesnt matter if it is simlockfree or not. i mean the bought touch diamonds hava always securty locked. in order to flash to a custom rom it needs to be remove the security, cid.
i did not use the olinex because it was simlockfree. how can i see whether it is cid locked or not.
thx
mikecarlone said:
as i said the touch diamond was simlockfree when i bought it. also every touch diamond is securty locked? doesnt matter if it is simlockfree or not. i mean the bought touch diamonds hava always securty locked. in order to flash to a custom rom it needs to be remove the security, cid.
i did not use the olinex because it was simlockfree. how can i see whether it is cid locked or not.
thx
Click to expand...
Click to collapse
No you don't need to have your device "Security Unlocked" as the purpose of this is to use other devices radios. No phones are bought retail with Sucurity restrictions unlocked. Don't worry as this is Not necessary!
What is necessary is to put 1.93 Hard SPL on your device to flash a rom.
i was traying to revert to stock by following the thread of mike1989 and apparently i did something wrong, im on s-on relocked bootloader and flashed a stock rom odexed (also by mike1989) and flashed stock recovery after that, now the phone cant recive any OTA's since ive flashed the 4.4.4 rom (world wide english version) and my phone is from france (CID: ORANG202) and i cant re-unlock the bootloader to flash a custom recovery
i also tried to flash a RUU (with the same CID) but no success it says :FAILED (remote: 12 signature verify fail)
i will be very thankful if anyone could help me!
Just go through HTCDev.com again to unlock the bootloader.
What if the exact file name of the RUU you tried?
What hboot, radio numbers?
If the RUU is indeed correct for your CID (for which I'm a bit suspicious, there aren't many RUUs for Euro carriers), you might have the wrong version. With s-on, the RUU has to be equal or greater firmware version than what is on the phone (no "downgrading").