Related
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
Remove the battery for 5 minutes and re-insert it back..see if it will fix it or not.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
what bootloader version are you running?
Many thanks trashcan for your quick response. I have removed the battery for 5 minutes, the screen was still showing that last image. I keept the battery out for 15 minutes untill the screen was totally off. Reruting the battery resolved the ****ing issue, thanks again.
Also thanks to walshieau, the device has IPL-1.01 and SPL-1.40.Olipro.
Regards.
Regards.
The bad part of the news is that the white screen is still comming!!!
Any clue?
Regards.
I thought of sharing this with you
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
attot1239 said:
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
Click to expand...
Click to collapse
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
LegolasTheElf said:
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
Click to expand...
Click to collapse
not quite, the ROM image affects some devices, I'll redo Black 2.0 like I redid LVSW if this keeps happening.
It is getting worse now ... I do not know what is happening
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
attot1239 said:
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
Click to expand...
Click to collapse
yeah... flash my patched LVSW with CustomRUU
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Yeah, that works!! That is how I solved my whitescreen.
thx Olipro!!
Many thanks Olipro for your continued help.
I have gove through your topic on the white screen and I posted you a reply there. The megaupload site is blocked in my area, if possible please mirror it on another site, i.e. 4shared.com
Regards.
I have exactly the same White Screen symptoms and more recently, the 1 mm screen shift problem too. I removed my battery for 15 mins and the screen shift temporarily went away but on the next reset, it is back :-(
I have SPL-1.40 Olipro but am unable to download the LVSW to resolve White Screen as Megaupload never works in my area. Can someone post that ROM to Rapidshare please.
Thanks a ton!
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Where can I get the CustomRUU? The device is now on the BL screen and the tools are being able to communicate with it.
Regards.
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
YES This was my first solution
http://forum.xda-developers.com/showthread.php?t=298520
bcrx7 said:
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298520
@BCRX7- After the WHITNESS from LVSW and then black1.2 I used this QTEK rom. It got rid of the white screen. Then I used Olipro's modified ROM. I am now running BLACK2.0 with no problems. Props OLIPRO and JasJammin!!!
i solved my white screen in a different and strange way, but easy
you may not believe it, but i did it, i solved the problem of my white screen in a very simple way.
i put my hermes in the fridge for 20 mins at 2C and i keep it on and put it over night.
(no charging, no sync, .... nothing)
this is the way how i solve it.
try it at your home, and tell me what happened to it.
thanks for all.
Hardware or software issue?
Hi,
Did anyone figured if white screen is hardware or software related issue? I wonder if there is anybody that doesn't got any whitescreen since they upgraded to WM6. I observed that the number and the severity of the white screens was different depending of the cooked ROM used (I have Olipro 2.10 SPL, Radio 1.50). Unfortunately I didn't count the white screen number for each version in order to choose the right one
I want to be sure I have tried all software methods before I will send my Hermes to the mobile operator for a replacement (if it is a hardware issue). Thanks in advance for any suggestion!
Hi all.. I had the same prob and it developed into this: http://forum.xda-developers.com/showthread.php?t=303872
So its a HW problem... You can get it back to normal by hitting(yeah not the nicest thing to do with a toy that has high price tag) the phone when its turned off completely -if its hibernating it doesnt work. If you have warranty time left -get it fixed. If not -you can try opening the hermie and doing whats told on 8th page in thread I mentioned. I got mine fixed by changing the front keyboard circuit board..
I tried to do a firmware upgrade (HA_VZW_207_117_01167_A12.exe from Verizon) on my BA using ActiveSync 4.5 from a Vista Ultimate workstation. The upgrade process stopped and now I have dim screen with the word "Serial" at the top and "v1.02" at the bottom. The BA does not respond to any buttons, hard resets, battery removal, etc. What did I do, can it be fixed, and how do I do it? Thanks for any insights and help.
more on Serial v1.02
I should have added this:
I have tried holding Power + Record + stylus in Reset hole, but when I do, the screen display does not change, still Serial v1.02.
I get the "bedunk" sound when I put the BA in the cradle but no light on the BA indicating that it is charging and no indication in ActiveSync that the BA is connected.
When I run the upgrade firmware program, I get a Error 101: Connection error.
Problem is Vista?
Just got everything to work on an XP workstation. Maybe it is a Vista problem thing.
Verizon should have posted an instruction how to upgrade under Vista environment...try searching their forum. It has to be somewhere!
bruceeanderson said:
I tried to do a firmware upgrade (HA_VZW_207_117_01167_A12.exe from Verizon) on my BA using ActiveSync 4.5 from a Vista Ultimate workstation. The upgrade process stopped and now I have dim screen with the word "Serial" at the top and "v1.02" at the bottom. The BA does not respond to any buttons, hard resets, battery removal, etc. What did I do, can it be fixed, and how do I do it? Thanks for any insights and help.
Click to expand...
Click to collapse
The same thing happened to me when I tried to upgrade my phone to WM6. What I did was to restart everything and resume upgrading. Hope this help.
I had same problem, and I solved it applying original rom update for appropriate device.
Using other rom updates it was giving errors or it was not working at all.
My PDA is Blue Angel - QTek 9090 and I used BA_WWE_14000_147_11200_Ship.exe
Now is everything working
Hope it will help you, too
Regards,
flo77is
Hello,
I hope someone could help me with this because I have been reading this thread:
http://forum.xda-developers.com/showthread.php?t=329079
for more than 3 hours.
(I started reading at 10pm and now it is 1:42am)
and read through every single post (and even every single word).
However, I am still having a problem with upgrading my IPAQ hx2495b
Basically, when I tried to get into the white screen boot loader mode, the screen faded to white and then nothing happens. I do not see any icon (or any graphical shape appear whatsoever) to indicate I am in the boot loader mode, it was just white.
I pressed the contact+iTask+reset button, which I believe is the correct combination.
And the screen shows no reposnse when I pressed and held the calender button.
I was be able to format PS though.
And when I tried to run the update program, it simply said the program failed to connect to ActiveSync.
My current bootloader version is 1.02.00H and I am running on Windows Vista Service Pack 1 using the Windows Mobile Center.
Could someone please let me know what I should do? Many thanks!
Regards
Anyi
OK, problem solved, I just have to work with the white screen! Welcome WM6!!!!!
Really
How id you fix it
you pretty much have to just do everything blindly and hope things will work, which turned out to be the case for me. Good luck!
Try Tommy's ROM http://forum.xda-developers.com/showthread.php?t=383173 , it's 6.1 and it's faster (as far as i can tell) than 6.0.
zhuanyi said:
Hello,
I hope someone could help me with this because I have been reading this thread:
http://forum.xda-developers.com/showthread.php?t=329079
for more than 3 hours.
(I started reading at 10pm and now it is 1:42am)
and read through every single post (and even every single word).
However, I am still having a problem with upgrading my IPAQ hx2495b
Basically, when I tried to get into the white screen boot loader mode, the screen faded to white and then nothing happens. I do not see any icon (or any graphical shape appear whatsoever) to indicate I am in the boot loader mode, it was just white.
I pressed the contact+iTask+reset button, which I believe is the correct combination.
And the screen shows no reposnse when I pressed and held the calender button.
I was be able to format PS though.
And when I tried to run the update program, it simply said the program failed to connect to ActiveSync.
My current bootloader version is 1.02.00H and I am running on Windows Vista Service Pack 1 using the Windows Mobile Center.
Could someone please let me know what I should do? Many thanks!
Regards
Anyi
Click to expand...
Click to collapse
Hey guys,
Long time member, but first time poster . I got some good news for you iMate users out there. I was able to get the new WM 6.1 ROMs for both the iMate Ultimate 8502 and 9502, though I was told these were still considered beta ROMs. They are for the Australian market I assume as the Telstra logo displays on the boot up.
I've been using it on my 9502 for the past day or two and it seems to have fixed the following issues:
SDHC is supported now
MS Voice Command is working
GPS does not have to be turned on manually anymore
Camera program memory leak seems to be fixed. I will have to do more testing.
Ongoing issues:
Free Program Memory is still 33 MB after a hard reset
The ROM also seems to fix alot of software compatibility issue I was having. Like some of my SPB software that I normally use is now working without any freezes or heavy slowdown. It also seems to run a bit faster, especially when you slide out the keyboard. Anyways, give it a try. Hope this helps.
iMate 8502 : http://www.megaupload.com/?d=NU4R6EWA
iMate 9502 : http://rapidshare.com/files/129807567/Ultimate_9502_V.01.73_NO_CP.rar.html
Great! Thank you!
Nice.
I went to run the update but it requires a "ROM unlock code"
Anyone know what that is?
Thanks
Dave
Re: ROM unlock code
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan
Has anyone run this beta as yet ? Keen to see what the opinions are. If WM6.1 doesn't make the device any more stable then ebay here we come which is a real pity I must say.
Just installed and it works better but yet to install my other software. GPS is missing from the wireless manager but I assume that is because GPS is now always active.
Now there is about 50mb free after hard reset. Might be some more once I get rid of the other start up shortcuts.
BTW I have an 8502 and thanks to the OP. Looks like we may be into a winner here, finally............
milanvot said:
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan
Click to expand...
Click to collapse
There it is!!! Thanks! Sheesh iMate is tough :-\
-D
Got it up to 6.1 and it is true the GPS is good to go without a turn-on.
However, with this rom I am NOT able to launch iGo 06 or iGo8. Anyone else have this issue and/or a solution? Note: It was working on the old rom.
Thanks
-D
Please help me....
I have i-mate 8502
I did the upgrade BUT before it I lounched Sprite Backup to save all phone data and settings.
After ugrading to WM 6.1 I lounched Sprite Backup again and... now I have only i-mate blue screen (i-mate sign on it) and phone doesn't go any further....
I would flash it again but my pc doesn't see it now at all.
Maybe you know some way to bring my i-mate back to life?
Please help.... Did i brake it?
Not sure why Sprite would cause that for you. I installed Sprite backup NP. I even, backed up, hard reset and restored with Sprite and not even an error.
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D
Taking battery out for 3 hours didn't work...
What else can I do?
Help please...
BIG Problem
Hi,
I've run the upgrade program and it worked fine until the first reset... Now I see the message "Please reconnect to PC and run the upgrade again"... I did this 10 times and nothing... I keep getting the "Connect fail" message from the setup file... The problem is that Active Sync dosen't see anymore the phone connected and I don't think it can anymore... that message seem to be from the bootstrap program or something like that...
Please help...
George B
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
Can someone post another link? The original is not working at the moment. Thanks in advance
martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!
imate 8502
OK, I got an XP machine and did the upgrade, went smoothly in about 15 minutes.
Overall I would say it is a worthwhile improvement.
Changes/improvements:-
* PIE scrolling fixed - much smoother, now with zoom
* PIE doesn't freeze any more
* Auto GPS enabling is nice
* Camera seems to start faster
* Threaded SMS is really good (and MMS is integrated now into one account)
* Seems to now stop notifying "SMS Sent"
* Overall perf seems better
* Wireless manager is simpler (I hated the old "solar system" UI)
* Phone settings includes Network Time setting and "battery saver" HSPA setting
* Can change default phone number (w, h, m) from the phone contacts app
Things not fixed:
* Voice call volume appears to be the same
* Select and hold with center button on email attachments still tries to open them (instead of offering to save like every other PPC I have used)
Not tested:
* SDHC support - I don't have a card
Best of all is that it appears to not have introduced any new bugs (fingers crossed).
I am sure I have spoken too soon ...
One thing I did notice was SPB Backup 2.0 stops the phone from rebooting successfully (just stays on Windows Mobile screen forever) if you have scheduled backups on. Seems as if it doesn't like something in the notification queue - so just backup manually. Not sure if scheduled backups on SPB Backup 2.0 worked properly in 6.0?
CrozB said:
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D
Click to expand...
Click to collapse
did u try GPSgate? some GPS programs need it!
rafaldabrowski said:
martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!
Click to expand...
Click to collapse
I'm glad to hear that....unfortunately i live in the galaxy far faraway...
martin_yo said:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
Click to expand...
Click to collapse
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it
mrloopy said:
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it
Click to expand...
Click to collapse
You may be right but in the spirit of trying everything you:-
1) PRESS AND HOLD "Fn and Green" buttons
2) WHILE KEEPING THEM PRESSED press and release the reset hole with stylus
3) CONTINUE HOLDING the Fn and Green buttons until the white reset options screen appears
Fingers crossed for you - if this doesn't work then you are right, time to send it back.
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
NJDubois said:
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
Click to expand...
Click to collapse
Okay do this, make sure the phone is off and hold the camera button down for about 5 seconds... this button is located to the right of the keyboard. While still holding it down plug in the phone to the usb and now you should see a tri-colored screen come up. Now you can load the original rom the phone came with... The official roms could be found in the link below... called "official roms" and just download the t-mobile rom... and now you can flash your phone with the original rom...
stonersayswhat?
gixxum said:
stonersayswhat?
Click to expand...
Click to collapse
quis-ego....
anyone seen the other half of my thought from the other night? anyone?
Ok, I had found a forum post saying to hold down the SYM button, but couldn't get it working untill I read your reply. Much thanks, the phone is on, and giving me the red green blue screen. I hear the windows alert saying a USB device is plugged in, but active sync wont pick it up. So I'll post about it here, and while I dig through the internet trying to find my cure, I will hope that someone will know what my next step is.
Much much thanks jdoggraz! At least now I know my phone isn't completely dead!
Nick
jdoggraz already told you what to do. YUou do not have to wait for active sync to pick the phone. Just run the exe for the orginal rom.
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
[EDIT]
I have found something about a program called Mtty.exe, and also a UNI_ExitBootLoader But I get a "un able to connect to usb" error with both programs when I try to connect. But, once again, every time I plug the phone into the computer I hear the alert saying a usb device has been attached??
[Another Edit]
I just noticed in Device Manager, under Window CE USB Devices, that my Smartphone USB Sycn Has that nasty Yellow explanation mark next to it.
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
?
NJDubois said:
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
Click to expand...
Click to collapse
why are you resetting it? you were at the bootloader screen in your last post...right where you needed to be. now you are 2 steps back?
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
NJDubois said:
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
Click to expand...
Click to collapse
pass the hookah brother..i wanna hang out in your world
puff, puff, give... man!....you're [email protected]#ing up the rotation!
An update.
I have gotten wm5 installed and working on my phone. I can't for the life of me get the 6.1 update to work. I get the agreement, press the center button and it goes back to the OS, the phone then locks up, and I have to restart it to re sycn.
This is very time consuming! The phone takes for ever to start. I also want to note that I upgraded my last dash with little problems, but this dash has been nothing but a head ache. WHY?!?!? I am not looking forward to being stuck with this phone.
Thanks everyone, for all the help. I went a little off course last night, I was falling asleep trying to get this thing working.
puff puff pass
nick
[EDIT] Why wont the screen go almost white after i click the middle button?!?!?!?!?
It works, YAY!!
Thank you soooo freaking much, everyone!
NJDubois said:
It works, YAY!!
Thank you soooo freaking much, everyone!
Click to expand...
Click to collapse
No problem, so what exactly did you end up doing?
damn! it's "cashed"!
pudgedaddy said:
damn! it's "cashed"!
Click to expand...
Click to collapse
hahaha