Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!
Hi all,
let me start telling that reading through this frum gives me the feeling that this is a very nice place for information around htc-devices and I thank both creators and users of this site for such a good information-base.
Reading here convinces me that I am able to fulfill my wish to change the language of my VPA-IV (HTC Universal).
I am a Dutch person working in Russia. As I was living in Germany I optained the device there, hence the German language.
For me personally all computer stuff should be English, so I'd also like this device to be so. The fact that the keyboard is German does not disturb me too much.
As a Vodafone user, who has other provider cards as well, I immediately bought the unlock code, so the device is working with other GSM cards as well.
When I asked Vodafone (before I bought the device) if I could switch to English I was told that I should buy myself another Windows Software and they were not able to provide me with it. They were not able to provide any help, nor software for this purpose though.
When reading around the site here (as well as the ftp) I understood that Windows is not provided now. So my first question would be :
-Am I really set to go if I have downloaded the following files :
Jasjar_WWW_11353_137_10301.zip
MaUpgradeUt_noID.zip
Universal_Radinly_UPgrade_1.04.02.zip
Or do I need something more ?
Further I read about extracting the .exe file (f.e. Jasjar_WWW_11353_137_10301.exe) and put some files from there at certain places. I have WinRar but this program does not recognize the .exe file. Can I really extract files from this .exe ? How do I do this.
A lot of talking is here about a bootloader. If the device is in this stage, can I still access it ? (f.e. like seeing a harddrive in my PC's Windows Explorer or something the like)
As I will be stressed like hell (who does not, when he does this first time) when I see the bootloader screen, is there something I SHOULD or should NOT do to make sure all will be OK ?
Last but certainly not least I feel very eager to backup before I do this. Is there a posibility to backup my ROM in some way, save the files on some place for eventual return to the ROM and ExtRom I have now ?
I tried the Program TotalCommander. If I enter the Extended_Rom in the "directory" field of this program I see all files included in the Extended_Rom, same if I enter simply "Rom". Is a backup simply copying these files to my PC or is there more to be done ?
thanks for answering in advance,
Ruud
Hi,
I'm searching a german ROM...
if you have a little of your time to spend on it, i would be very thankful.
but first:
- about extracting the .exe files: Run WinRAR -> Menue: Open file... -> change 'All archives' to 'All files'
- about ROMs: Jasjar_WWW_11353_137_10301.zip is the only rom I would update, not the Radio.
- about bootloader: In this state you can't access your device (only updating the ROM)
- about backup: It is not easy. (How to d2s (dump) the ROM ) but I think Vodafone will shortly relase a update. So it will be possible to restor the device.
How to help me out:
- you will need a Storage Card.
- Download TestWM5.rar
1. Extract TestWM5.exe from TestWM5.rar and place it to you device.
2. At the device, use File Explorer to execute the TestWM5.exe
3. Click "button1" to start the dump process, the file will then be save to \Storage Card\Dump\
4. Copy the Dump folder out and then RAR or Zip it
This will include all files in your windows dictionary -> this is what i need
Where to place exactly ?
Hi bepe,
do not know if You are still available (or again). First your issue.
I logon to FTP from XDA-developers as to upload.
In the upload directory there is only a HTC-Wizard directory, not a wizard. Is this directory the one to place your file on ?
Is there a rule how to name the file ?
I will be dumping in a minute, can upload as soon as I have your answer.
Ruud
Hi bepe,
further to your issue.
1) I do understand that no private information is copied ? or should I do a hard reset before I dump for You ?
2) Whilst running your testwm5.exe from the root-directory of the storage-card I am being asked to agree your program access. This is normal, I allow. But why are there additional programs being opened I never heard about ? I denied them access and let the program run further !
After a lot of files running through the screen (very fast) it looks like the program stopped or finished. Now which file has been created for You ?
Explorer on the Universal does not show it, through my PC I looked as well, but do not see any big file, please explain.
Ruud
Hi Bepe,
one more reply to You :
Even if I allow the file mentioned to run (during the time your program is running), I am being asked again and again if I allow it again. The name is GAC_System.Data_v1_0_5000_0_cneutral_1.dll
Even if allow access all of the occasions I being asked, no file is being created on my storage-card, nothing to dump to You. Not even the dump directory is made.
What do I do wrong here ?
To my issue :
First I noticed that the radio update is available here only as 1.04.02
My system tells me I have 1.04.10 delivered from origin. If I do a ROM-upgrade, do I loose my "radio", or will it not be touched ?
Connected to this, can I dump my "radio"-files seperately ?
WinRAR. Issue solved !
Backup : I was at the buzzdev.net link before. But I actually do not even understand where I can get or see the task32 language he dumped on his screen. And I understand that I will not be able to restore it without help anyway. So this is not really the kind of backup I want.
The information about Vodafone, where does it come from ? when is something expected ?
Ruud
For security sake only.
I am getting nearer to make that final step ;-)
My Winrar was too old, I could unzip the .zip file to a .exex, but I could not unzip the .exe file further. Just downloaded the latest Winrar, now I can see all files included in the provided .exe file.
1) I understood that I should delete the original upgrade-file called ROMUpgradeUt.exe.
2) When I start the MaUpgradeUt_noID.exe in a seperate directory with the rest of the files from the .exe I get to see a different HTC device. When I continue, it will not recognize any of the versions from my Universal. I felt unconfortable to continue.
Can it be done without a problem ??
2a) I renamed the ms_.nbf AND radio_.nbf and restart the Utility, it still shows a photo of the wrong device, but it now does recognize the versions of Device CD image version : 1.13.56 Device Extended image version : 1.13.163 and Device Radio image version : 1.04.10
It confirms to change to CD image version 1.13.53 and leaves the extended image version : "empty" as well as the Radio image version : "empty"
Does this mean that by taking away the ms_.nbf and radio_.nbf files I can stop the device from upgrading the extended rom and the radio ?
Why I ask ? Because if I renamed ms_.nbf back and ONLY radio_.nbf is unavailable now, it shows to change the Extended Rom too, but the Radio image is still empty.
Finally if I rename ALL back, it shows to change all, but all version numbers are older once ;-(
Main question here is, can I leave radio_.nbf away, upgrade and hope for radio to be my version 1.04.10 ?
Ruud
Hi,
I'm back.
I'll PM you Upload information...
private information are not copied.
Only if you have saved private information in your /windows/ folder!
i have never being asked to agree for program access :?
...but I started it of the root-directory of my device.
what is the name of your 'Storage Card' folder?
I not realy have the info from Vodafone, but for all devices before there have been more than one update. But I can't tell when the first update is expected.
If you are trying to make a backup: you will need a terminal program
About dumping
So I have a complete "new" device now.
Did a hard-reset, after which I did not give any new information to the device.
I placed the .exe file You gave me in the \windows\startmenue before, after which it is asking tonloads of access requests.
Now I replaced it in the root-directorym Yes, no additional questions asked anymore, perfect, well NO. As there is no directory made on the storage card. I tried it once with the async active and once with the device seperate. No result.
Any ideas ?
what is the name of your 'Storage Card' folder in your root?
As the device is German, it is called "Speicherkarte"
and renaming is not possible (allowed)
OK this is the problem, I'm trying to get the Source code to change that.
found something: this tool will change the folder name from different languages to "Storage card" which is often needed for different tools
Understood.
About my question, as I am still nervously waiting (cannot start the upgrade before You got your data, can I ;-)
Did I understand correctly, that the file MaUpgradeUt_noID.exe is made for different devices from HTC and therefore I do not get a photo of the universal when I start the software ?
If I start the JASJAR_WWE_11353_137_10301.exe I DO get to see the Universal, but of course get the country error.
Did I also correctly understood I can take away the radio_.nbf from the directory and the update will handle both ROM and ExtROM but leave the Radio untouched ?
Will I be entering this "bootloader" status at all, as I do not need any further updates then ? Are there any resets after the upgrade which I SHOULD or SHOULD NOT make to get the device working again ?
Ruud
Hi bebe,
storage.cab works (be it only after a soft-reset)
The program testwm5.exe is much slower now, so the result is taking minutes now (if not tens of).
Looks like the perfect speed of the program while the storage card (at least for his eyes) was absent, was due to "saving into space"
Will upload asap.
Ruud
I'm loading JASJAR_WWE_11353_137_10301.exe its at 60%
MaUpgradeUt_noID.exe is a hacked version, of another device.
So the photo should not be important. (Please wait until i have downladed the file, I'm not realy sure jet...)
OK, I have to wait anyway, because TestWM5 is very slow now, I can see file after file and calmly read it. Before it was running before my eyes. I am afraid this is going to take ages.
We are on the same frequency that the dump I am making is from a device WITH Extended Rom installed. I was NOT soft-resetting during installation, so all Vodafone add-ons, are to be there now.
If You need the one without ExtRom as well, please tell me.
The upload works OK, I prepared a directory there, but uploading is to be done after longer waiting time.
Are You afraid the JASJAR file is not good ? I downloaded it because this one was proposed on this forum.
Ruud
Its not about the ROM its about the MaUpgradeUt_noID.exe I'm not sure if ths is the exe file to update a Universal.
I dont have a Universal only a Himalaya and my up UpgradeUt starts with HimUpgradeUt... .
Was this file mentioned in the readme of the JASJAR exe?
my download is very slow... 70%
I only downloaded MaUpgradeUt_noID.exe because it was proposed here (for the Universal).
I have no Readme.txt inside the exe
EnterBL.exe
GetDeviceData.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
Well and of course the original upgrade file ROMUpgadeUt.exe, but I was suppose to delete it.
Only file which I can read is RUU.conf :
[PLATFORM]=857873
[RADIO_TYPE]=2
[SECURITY_FLAG]=1
[DECODER_KEY]=1
[RADIO_FLAG]=2
[GETADDR_TYPE]=1
[JUMPCODE_TYPE]=1
[FORMAT_TYPE]=2
[SCREEN_TYPE]=2
OK, TestWM5 is finally ready, will do compressing and uploading soon.
Ruud
I appreciate if somebody with Qtek g100 (GPS navigator PDA) can dump the rom and upload it to the ftp..
I need it for changing CHT rom to English.
The way to do it is:
1. push Power+Record +Reset,
2. release reset, wait until screen start with White and than release both other - Power and Record. That will put the PDA in Boot load.
Once in Bootload, run the RomUpdate / Mtty , choosing USB , push Enter to receive the prompt USB>
3. type r2sd while SD is in the slot., the PDA will sump the rom.
4. when completed (back to Prompt). use NTRW by NTRW read p100ENG x:, while x is the drive letter of the SD card.
5. Upload the rom to the FTP.
Dopod p100 More details...
I have the "machine" for few days...
Playing with it , it seems that boot loader is the same as the ipaq 19xx.
I managed to dump the Chinese rom (attached ) using the monitor r2sd command.
When trying to flash it with the English version I get “Invalid ID”, it refuses to accept a flash of English version.
One way to help me is to patch the RUU to ignore country and the other one is to have a dumped of an English version.
I did not apply the procedure of NfbTools.. I do not believe that rom structure is the same as for the XDA.. shall I?
I will upload both files mentioned above to mthe ftp and appreciate help.
I have an I-mate PDA-N, it's my first PDA, but (after 2 months of reading about) now I'm able to do this.
Only one problem... I'm from Italy, and you want a ROM in english, I think
PS: excuse for my english
Hi, i have a SPV5000 and i can put a lot of kind of 1.13 rom inside, like Qtek or Orange.
But impossible to put any 1.30 rom (orange, qtek french or WWE).
I've tried a lot of solution like "put the radio first" ... rest after.
Do you know if it's possible that my hardware version refuse this 1.30 rom?
I think the guy who sell me the spv sell me a pre-serie .
Thanks
The first question I want to ask is: How do you perform the upgrade? Do you use the No ID Tool? If not, try using it. Here is an instructions I made:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file in one folder if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
Thanks for your complete response
Of course i'm using the MaUpgradeUt_noID ... i have no error message during the process but at the end after the hard reset i have black screen.
and to try to only flash the radio I renames other files .
thanks
I steel don't enderstand ....
Do you think the bootloader version is important ?
i have the O.56
SEB152030 said:
Do you think the bootloader version is important ?
i have the O.56
Click to expand...
Click to collapse
It won't hurt to try and update using Boot Loader Mode.
What do you mean "0.56"?
when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56
SEB152030 said:
when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56
Click to expand...
Click to collapse
You might be right. Your exec must be one of the earlier version. I remeber some time ago, someone asked the same question you did. Maybe someone else can help. Have you tried upgrading it using my instructions?
thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....
SEB152030 said:
thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....
Click to expand...
Click to collapse
I believe you need to find out how to upgrade the "Serial USB" application on your Universal for the No_ID Tool to work. Other than that you probably need a version of the No_ID Tool that works at an earlier version of the "Serial USB" version that you have. I'm sorry too, if I didn't help.
im using a tytn and getting errore message
dows the official upgrade is for tytn or doopod ?
anyone can help ??
i try using hard sspl and still .. same
I think it may be because it is a rom for Asian networks... I got a similar error, and will have to manually import the settings for my network providor... other than that, everything else went fine...
I believe there are cabs kicking about this forum to auto setup for various providors.. I think it is trying to auto detect your vendor, and if not Asian, is returning the error
I think thats all the error is showing...
If you've downloaded one of the other cooked ROMs on this site, you should have an exe file called RUU_wrapper.exe.
Now, install WINRAR and right click on the dopod rom and choose extract and it will extract various files, one of which will be another exe file. Extract this exe file again and you should end up with a file RUU_Signed.nbh - this is th only file you'll need out of the lot.
You can delete all the other files from the dopod ROM now, just keeping the RUU_signed.nbh. Copy the RUU_wrapper.exe file into the same folder and run it and you will flash the dopod rom to your phone nicely - just make sure you're HARDSPL first!
Now, you could be even smarter at this point and use dutty's good nbhtool if you like to "unwrap" RUU_signed file and remove the IPL \ SPL (though with HARDSPL, I'm not sure this is necessary) and the Radio part if you like (and the boot splash screens if you're so inclined and then use it to wrap it all back up again.
HTH,
Smiffy.