Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
HI all,
yesterday my Orbit crashed. Whenever i try to turn it on, it gets stuck, and only shows the first 2 lines when loading, and does not show the GSM version and OS version, I tried to do a hard reset, nothing helps, it just keep stucking on the 1st screen with the first 2 red lines.
Anyone any ideas ???
Thanks
Worth a Try
You might just have a go at putting it into bootloader mode and flashing with a new or the same ROM.
I wouldn't like to suggest it would definitely work, but it'd be worth a go.
How do i do that ?
When in doesnt recognize a connection ?
igal said:
When in doesnt recognize a connection ?
Click to expand...
Click to collapse
It may be able to make a connection in bootloader mode. Like I say, it may not work, but have you tried it? Have you got a better idea?
igal instructions how to go into bootloader mode are in the first thread of the forum. You dont need an activesync connection just connect via usb.
As Mark has said above Activesync connection is not required for "connection" Bootloader mode activates a USB connection which allow ROM flashing.
Use an official O2 Rom or similar, which AFAIK does not require USPL'd ?
Check this thread, which succesfully fixed my bricked Orbit, Remember your on your own though, but if it is knackered now it can't get worse....
My instructions use the official German Rom to get it back up and running, as the English version had not been released. Once you get back up and running you can use any of the other cooked ROMS that are about.
http://forum.xda-developers.com/showthread.php?t=312495
DISREGARD the bit about WINRAR, just get an official ROM, stick your handset in bootloader mode and run ROMupdateUtility.exe
Report back on how you get on.....
I went in to..
Bootloader mode. and got the RGB screen with usb connection, but when i try to flash ( both the rom im using now B&B 4.1 and also an official ROM by O2 ), it quits after 3% altough i have a CID unlcoked by imei-check, and i flashed like 10 times before...
any ideas ??
Thanks!
You must use the factory rom specific to your device including language - did you?
Yes i did.
Not working....
Hi Igal,
which rom eaxctly did you try to flash with to rescue your Artemis from the bootloader?
Rgs
Cyber
I used O2's rom
I downloaded the official rom of O2 ( Windows Mobile 6 ). Once it told me "Invalid Vendor" and the other time " Image corrupted " ( I have O2 XDA ORBIT ).
Are you in the uk using a rom from 02 UK?
I had a similar problem like you are having and managed to rescue using the HTC WM5 standard rom.
Im not in the UK, But
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
igal said:
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=318696&highlight=mobile+5
I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!
this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..
i tried all of that but not working
What error is it ?
i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader
Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.
hey, are you usin' Windows Vista
no XP SP2 , but as i told you i think i installed rom not for universal
also my screen is dead nothing at all only black no serial or usb on the screen
aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..
thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..
ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom
every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?
Oops! I omitted the quote
aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.
i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm