I am new here. I already seached, but I did not find the right answer. Here my Problem: When I try to start Bluetooth I always get the message that there is not enough memory to start. It always happens when I first started wirless. Does anyone know, how to solve this Problem? Please help!!! By the way, I also have installed MS Voice Command.
Greetings
Peter
IMHO rom upgrade will solve this
Hi Explode,
I really would like to make an rom upgrade, but I think there is no rom upgrade at the Vodafone Site.
I played araound a little bit and found out, that it has something to do with wireless. When I activate wireless without connecting to the Internet to catch my emails, everything is OK. I can activate BT. After I have connected to the Internet and try to start BT I get this message.
Any idea?
Thanks
Peter
Related
When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900
Sorry to annoy everybody, I have had my M2000 a while now and there are a few things I would like a hand with.
1) I unlocked the M2000 and am currently using it on O2 pay and go. However I cannot use GPRS, if anybody could help me out by telling me settings and/or how to connect properly I would be very grateful!
2) I am running Windows Mobile SE Version 4.21.1088 (build 14132) are there any upgrades possible at all to be able to use Windows Media Player 10? I don’t mind upgrading operating system as long as it doesn’t cost too much.
3) Is there a way to back up just my text messages from the M2000 so I can have them saved on my computer and/or my 1 GB SD card?
4) Finally (sorry about this) does anybody know why sometimes when I make calls I can’t hear the dial or the person talking but they can hear me? I have checked the volume (I'm not that dumb) but resetting it is the only thing that works, which is pretty annoying.
Thank you very much for your help. I know there are probably a million listings with these answers but if you could direct me to them or give me your own verdict I would very much appreciate it.
Thanks again.
1. do a search in the forum maybe excluded to the networking it forum
search string should be something along these lines "gprs AND payandgo"
or something like that
2
read this
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
3. again search for something like "SMS AND backup"
Thanks for that Rudegar, if anybody else can help me out on this one too, I would really appreciate it. You gave me a link to download WM5, are you currently using WM5, and would you recommend it? I have no programming experience really and it looks quite complicated to install so much so I don’t know what some of the files are etc. will there be an easier version where all you have to do is click a button and it will auto install? You’re the clever one here so ill do whatever you recommend, ill take your word for it. Thanks again Rudegar, if anybody else can help please do.
Thank you.
I have had my M2000 for about 2 months and for about the last month i have also been have the same problem as number 4, where people i call can hear me but i cant hear them, when i fiddle with the volume slider on the side i can sometimes (only sometimes) hear a split second of sound from the other person, its SO annoying having to reset
could be a radiostack issue
maybe an upgrade of it will fix it
also had some issues with my xda2 when people call it sometimes take awhile before they can hear me
the cause of that is bluetooth tools which seem to be trying to direct my call to my bluetooth headset
dont matter if i have a bluetooth headset though it still try take about 10sec before they hear me then
Hmmm, glad to hear I'm not the only one with that problem. It is really annoying though having to reset it when i need to make a call. I'm worried about using a radio update as I don't have a clue about who has made it and what it will do especially if its a con. Where can i go about getting a trusted Radio update? Talking about updates, is there a ROM update available?
Guys install this cab file it will fix your problem..
Or while you don't hear the other party just turn on the BT then turn it back OFF this will solve..
read these pages
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
there you get all you need to know about upgrades of all kind
I have taken a huge risk in installing WM5... Well I'm doing my best anyway. I need some help though.
I have so far got to re-partitioning and formatting my device but whenever I press format an error message comes up saying "Error FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" what the heck does that mean? can anybody help me out?
Big thanks to everybody who has helped me out so far with this and for anybody elce if you can help me, please do.
Thanks.
Anyone know if it is possible to remove a cab file like this after I have installed it? I've loaded it and it seems to have screwed up my pocket pc.
Thanks,
Cian
PHEW!!
I'm so glad i didn't install that cab. I was weary to start with and I'm glad i didn't it appears to be some sort of intruder on a pocket PC which jumbles up the settings. Just for anybody elce who is about to download it, take some advice, DONT PLEASE!!! I'm trying to upgrade my ROM but orange are crappy and dont supply ROM updates yet. Ill try the I-Mate Update. Fingers crossed. Thanks again to everybody who's helped me out!
Hello there,
there are 2 big problems i have found with my Qtek 9090 since i bought it about 3 days. Its kinda soon to find out this big bugs, so i would like to know is these are general people issues or they are happening only to myself...
1.- somehow after some standby time, i can't hear neither do the caller hear what im saying tru a conversation. This is solved by soft reset the device... also founded in this forum that by enabling bluetooth all time, this issue can be ignored and the phone works quite well... (stable)
2.- when im connected to GPRS, speak about MSN, IE or Mail .. and i make a call (don't iven make the call during 5 seconds) i imediately lost the GPRS connection and wont be able to reconnect to it ... i always receive an error saying " unknown error found ... try to reset the device as the owner manual indicates .. something like this... "
in fact i have to soft reset each time to get GPRS working again.. and im really sad by doing this all the time ... but i dont know if anyone else has this problem, please let me know any information that could be helpfull, i realy apreciate.
Thanks in advance.
Rodrigo Ventura R.
I had the same problem with not being able to be heard during a call. I upgraded my ROM and the problem went away.
Not sure about GPRS.
i have qtek 9090'... in
spanish... what rom should i download. actually
have rom 1.40.
thanks in advance.
I would try this one:
Qtek ESN DANGA304 1.40.03 1.40.158 1.12.00 Download Thread 2
from wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Follow wiki for installation walkthrough
Hi all. I searched please don't him me!
Strange WM6 issue with both these products. Sometime they connect and life is fine, untill I am guess the radio goes to do some kind of data retrieval and then WHAM my computer freezes solid. My PPC does not freeze. I can unplug it. But my PC is locked solid, no ctl+alt+del nada. Have to power it off.
It seems to be an Activesync/PPC data request issues. I am running AS4.5 on my desktop.
Just wondered if there was a setting, check box, reg setting to stop this. Not too sure I even know what it is.. Also wondered if anyone else experenced it.
I apologize if there is a simple answer. I searched under trueconnect and did not find an answer... Thank you.
I use version 2.0.0.0 TrueConnect, and faria/CUSTEL roms, no problem at all.
Try re-install or sth I suggest
Thanks for the response. Looks like it could be the ROM. I will try to reflash with another but first re-install. Nice to know it is working for you!
Take Care!
Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge
thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..
Yet no solution...
info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?
Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...
have you done a doc-format? sometimes that can get rid of very peculiar problems.
-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.
To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now
folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...
no suggestions?
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion