Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
I understand that you hadn't to hard reset the jasjar after upgrade it with this radio. Please confirm and if is any tricks to apply.
As you can see below, I have radio 1.04.10 installed. Anybody know the differences between these 2 loads?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
No tricks, no hard reset, just a normal radio upgrade...
Hello
Has anybody tryed this on the Xda Exec?
Regards
Gigino
ncruz said:
No tricks, no hard reset, just a normal radio upgrade...
Click to expand...
Click to collapse
I don't know what pocedure you guys use, because to me happens allways the same... have to hard reset it, upload the original ROM and following it upgrade to the latest radio...
Can somebody explain the complete procedure without having to hard reset it?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Where did this version of radio rom come from? Can anybody who has done the upgrade comment on the version? anything better or worse?
gigino said:
...
Has anybody tryed this on the Xda Exec?...
Click to expand...
Click to collapse
I've been using radio: 1.06.00 since Tuesday or Wednesday without problems. Hasn't fixed nor broken anything as far as I can see.
Radio 1.06.00 was issued as part of the recent German MDA update.
[No message]
Yes, ist working, had to do the update several times, like 10x, before it was installed, soft reset ......and.....IT'S ALIVE
thanks
Thanks, ncruz! the radio upgrade on my MDA Pro worked flawlessly on the first attempt. My device information now shows:
ROM version: 1.13.69 WWE
ROM date: 10/12/05
Radio version: 1.06.00
Protocol version: 42.37.P8
ExtROM version: 1.13.162 WWE
I was hoping the radio would solve a couple of issues I've mentioned on this thread:
http://forum.xda-developers.com/viewtopic.php?t=38876
but, unfortunately the wireless manager and bluetooth issues still persist.
Hi,
Removed SD and SIM cards.
However, as with my all Universal previous ROM upgrades (only Radio till now), I got several errors (114; 150;...) till succed. About 15 and long attempts.
Did you experience a similar problem?
Could it be related with device bootloader version (mine is v1.00). Does someone has a newer one?
Between some attempts and errors, I need to 'soft reset' or 'cold boot' in order to get a different error, and finally a succesfull attempt.
I've a Qtek 9000 with a TMN SIM (Portugal) and it works fine after upgrade.
Just in case, I want to give up in future similar operations, does someone knows how to get rid of the bootloader? Does an Hard Reset resolves? Is there any other way?
Error 114: Radio ROM update error
Error 150: ROM upgrade utility error
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Tuningszocske said:
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Click to expand...
Click to collapse
I've noticed 2 times now (with hard resets between) that sometimes when I receive a call, my Contacts open and I can't close them. I can click the Start menu and run another app but then Contacts is brought to the front again. After enough clicking to close Contacts, the upper right corner quickly alternates between "OK" and "X" and I end up having to soft reset.
One thing that I did do differently is that I performed a soft reset prior to O2's extRom installation. Are there any 'fixes' in their extRom that I might need to manually install?
I'm thinking about going back down to 1.04.00 as I didn't have this problem prior. But I'd rather not downgrade.
I'm down?grading to 1.04.10 now....
Re: Radio 1.06.00 Upgrade - borged
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Re: Radio 1.06.00 Upgrade - borged
eappel said:
....I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
Eric
Click to expand...
Click to collapse
It's looking for a serial (not available on Universal) or USB connection, so you'll need to connect to "ActiveStink" via USB cable. The "Serial" will normally change to "USB" when you plug USB in.
Unfortunately, I've never tried it with an *un-partnered* device stuck in bootloader mode - hopefully somebody else has.
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Can u let me know whether i can upgrade on dopod 900 in singapore or this upgrade is restrict to a particular country.
cheers Taurus
can be used for Dopod 900 also...
the radio update is for all models of HTC universals...
Re: Radio 1.06.00 Upgrade - borged
eappel said:
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Click to expand...
Click to collapse
You have to instal complte original ROM, the one that came with the phone,
just conect the phone with usb, start upgrading your phone, and wait for 20 minuts to be done
thats how I manage to fix mine 8)
I Removed the Radio 1.06.00!
I had a lot of problems with Messagin. I losed all my internet account/Configuration, my SMS ....
It was a problem with the Radio 1.06.00"
i have strange problem here:
my phone start to act like i'm pushing the ****ing volume button up so it looks like teeeeeeeeeet teeeeeeeeeeeeeet repeatly then it silnce again :s
i dont know whatis wrong here?
and can i assign this key to anything else and not for volume
My Mobile is using WM5
Informatios:
Device : iMate PDA2K
ROM Version : 5.04.09 WWE
ROM Date : 11/02/06
Radio Version : 1.12.00
Protocol Version : 1337.42
ExtROM version : 1.4
regards
i just bought used BA,where at first the wifi connection is working.the problem was only when i used it online after half an hour an above, it will restart and soft
reset by itself.
And after several time it behaves like that,now it cannot connect to the internet.The device can find the connection,but when i tried to connect, the tower icon do not show connected signal, but on "wireless Lan manager", it shows the device are connected.The device still cant connect to internet.And it doesnt change even after i formatted it.
my BA :
WM2003 SE
ver. 4.21.1088 (build 15045.2.60)
ROM ver. 1.40.00 WWE
Radio ver. 1.12.00
Protocol ver. 1337.42
ExtROM ver. 1.40.923 WWE
Someone please help me with this probs...
i want DopoD M700 update
Try B&B4.3, u will impress with this rom.
Anyone know where I can get the Dopod M700 CHT Rom beside from DopodAsia? Thanks!
Does B&B4.3 for artemis / P800 ? the buttons are different..
M700 got different buttons alocation. No GPS.
I'm looking for WM6.1 Vanilla specific for Dopod M700 only
-
I'm using Dopod M700 too.
You can use Black & Blue 4.3 or 5.0 (but 4.3 is better) or the best one is Artemis Touch 4.01 (or maybe 4.02 better, I'm testing 4.02).
All of them work good with GPS
Those ROM is for Artemis & Dopod M700 is Love, so you have to change the button setting, it is so easy.
Ok, I found the Dopod P800W CHT Rom from somewhere and flashed my Dopod M700 by editing the hex file to match the Model ID. However, after flashing the Dopod P800W CHT Rom, my Dopod doesn't show EDGE connection but just GPRS. I'm sure that it was EDGE connection with my previous ROM. Anyone know how to get back to EDGE connection? My previous ROM and current ROM are:
Previous ROM:
LOVE 1.3 WEN WWE
Rom Date: 16/11/07
Radio Ver: 03.07.90
Protocol Ver: 4.1.13.51
Current ROM: (File Name: P800w_TW_CHT_WM6_Upgrade_20070713)
3.7.709.1 CHT
Rom Date: 21/6/07
Radio Ver: 2.67.90
Protocol Ver: 4.1.13.51
Ext_Rom Ver: 3.6.709.101
Even I flashed the radio Rom to 03.07.90 or 03.12.90, the connection still at GPRS status. Even the Model of P800W and M700 are EDGE unabled in Taiwan. Therefore, I don't know why the EDGE doesn't appear on my connection.
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Pardoon said:
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
Click to expand...
Click to collapse
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
lamjeff said:
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
Click to expand...
Click to collapse
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
tan880121 said:
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Click to expand...
Click to collapse
i have already update the spl to 1.11... btw, can u let me know how to go to serivce mode ..... coz right now i try to use usb cable to connect the pc... no response.... help help
y_bother said:
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
Click to expand...
Click to collapse
Thanks for your information... I have work on this machine over 10 hrs to search over the forum here.... at last i can flash it when i press record and reset button and at the same time connect with usb cable ...... after that i can flash it thru PC ...........
tks...
i have a jasjam
it has
black satin rom
rom date: 07/10/07
radio version: 1.41.00.10
protocol version: 32.74.7020.18H
i would like to upgrade to the newest wm6.1 rom...i am a complete noob so i would love a step by step guide...any help is much appreciated thanks
I have a rom
Check it out at http://www.coolthingsforcomputers.com/2008/04/15/hx2000-wm6-essentials-rom/
Download the file I give you a link to and start your pda in pre-bl mode by holding contact+itask+power and then press reset after about two second unhold these buttons) after that press calendar. Run the file hpRUU in that zip file and it will take like 20 minutes to reflash it to my WM6 ROM.