Hello, a friend of mine has Hermes, I have a prophet (wm6) and i want to flash his Hermes.
Is there an official wm6 rom in english for Hermes?
Also is the procedure the same as prophet?
Thanks!
Dunno...not got a prophet.
Smiffy.
P.S. - check out vanx's upgrade guides in my sig
where can i find the official roM?
May I humbly suggest you look at the stickies. You may see that there is one called "Official WM6 ROM links" or something similar.
todd_jg said:
May I humbly suggest you look at the stickies. You may see that there is one called "Official WM6 ROM links" or something similar.
Click to expand...
Click to collapse
Aye, 'official' WM6 out for Hermes.
Procedure different for each HTC model (usually), i.e. don't use Hermes Rms OR instructions to upgrade another devie, etc. Look at the 'Windows Mobile 6' threads sticky and check out mrvanx's guide - has all your answers matey.
WM6 Hermes threads: http://forum.xda-developers.com/showthread.php?t=299591
MrVanx's guide: http://forum.xda-developers.com/showthread.php?t=299462
Enjoy.
Hi I have a Kaiser and I can pimp it fine, however looking briefly on the Artmeis section my friend has asked to upgrad hi windows 5 to windows 6.1.
Do I..a) just install the rom in the upgrades section i.e cube version
or..b) is there something I have to install first before doing a rom upgrade.
i.e on the kaiser I had to install Hard-SPL before upgrading, is there something similar that needs to be done..
If the above 2 steps need to be done or just one step can someone please send me a link to those relavent files....I think the title and question put accross is a worthwhile thread for newbies and they can pick it up easily if all the information is replied to in this thread.
Many thanks
A hard-uspl-like program is included in Meschle's and Toms roms. Just execute step1.bat (which is USPL), reset, then step2.bat (which is the actual flasing of the rom).
have u got a link direct to these roms please, it will be like one page read up for newbies with all the info on this thread
Meschle's Touch ROM
Hi everyone!
Here's the deal! I'm no noob to flashing, cooking and HardSPL as I'm positive there are plenty of users who are swimming in the same pool.
Moving from another device's forum (Trinity) to the Diamond forum is quite a shock. So many posts, so many threads.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
For instance:
I'm running an old version of Radio and Official Diamond ROM (Stock), 1.00.25.03 Radio and 1.37.479.3 WWE ROM.
Bootloader version is:
Code:
DIAM100 64M
SPL-1.37.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I'd like to first upgrade to another Official ROM, like RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1.
No info on following:
- changing an original to another original ROM: is there need for HardSPL?
- changing a supposed EU original to an Asia original ROM: is there need for HardSPL?
- if there is need for it when upgradin ROM, which one to choose based on bootloader info?
- if there is need for it when upgradin Radio, which one to choose based on bootloader info?
etc.
I can live with my new device with stock ROM, I can tweak it, no problem.
But it is my strong belief that a detailed tutorial/description/info/guide thread could get a nice sticky.
Something that would make new users like:
"Oh, I just bought a Diamond, I read this sticky, compared my bootloader info with the ones stated in the thread, checked my ROM and Radio, checked my new ROM and Radio which I want to flash, so I need this/I don't need any HardSPL and it worked"
Yes, call it spoon-feeding, but while looking at the Forums and reading and searching, there's so much clutter some can't even find the Search button!
My two cents!
I totally agree !!! We are needing that "tutorial for dummies"
Im new to the Diamond forum too, had a tytn for ages though.
I found everything i needed to know on the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
geistteufel said:
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
Click to expand...
Click to collapse
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
tnyynt said:
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
Click to expand...
Click to collapse
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
andy2111 said:
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
Click to expand...
Click to collapse
I know that, remember, I'm not a n00b.
First, I have no updates in my registered Diamond e-Club account.
Second, this is what I am talking about: You said:
You don't need HardSPL to flash an official ROM.
Click to expand...
Click to collapse
Other peoples opinion:
omaga said:
You need hardspl on every one, and all are offcial roms as they were downloaded
only the rom you can download from your own HTC e-club site dont need hardspl.
Click to expand...
Click to collapse
Contradictory information?
Now since I don't have any updates in my own e-Club, there's the HardSPL option with other (even Official) ROMs.
Question is: which one? (1.23, 1.24, 1.34, Developer edition, Hard-SPL-Diamond-OliNex, HardSPL_OliNex138_Signed or RUU_Signed_1_93OliNex_HSPL_UnsignedEdition).
This is crazy!
Maybe that's the difference then - perhaps ROM downloads via the e-club are treated differently, although I can't think how.
Seems that Cmonex and Olipro are the SPL experts here (I'm sure you've already seen this http://forum.xda-developers.com/showthread.php?t=400402) so maybe they're the best ones to help.
If it helps I updated to HardSLP 1.4 and ran quite happily on my stock ROM before upgrading to Dutty's ROM. I guess it's down to how adventurous/risky you want to be.
Good luck.
1. look at the next posts, i blew it on this answer..
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
here, an answer from THE expert:
http://forum.xda-developers.com/showpost.php?p=2484533&postcount=143
2. if i convinced you to hardspl then go to the unsigned version:
http://forum.xda-developers.com/showthread.php?t=400950.
i am using it from the beginning (2 month at least) and i flashed my diamond 4 times without any problem at all.
3.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
Click to expand...
Click to collapse
already there, in almost each ROM thread.
i think all cooks start their thread with the warning (hardspl first!) and a link to the recommended hardspl.
bepe is "all signed" so he never mention which hardspl.
others, for example:
dutty's choice of hardspl: http://forum.xda-developers.com/showthread.php?t=408621
[WM 6.1] NEW SWIFTBL WWE DIAMOND ROM V5.0 - CE OS 5.2.20273 (BUILD 20273 AKU 1.3.3)
http://forum.xda-developers.com/showpost.php?p=2312249&postcount=2 or http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1first
DIAMOND PROJECT ROM Release V3.2 [WWE/GER/ITA/FRE/RUS/ESN]
http://forum.xda-developers.com/showthread.php?t=408621
i wonder what happened to you.... learn from post #3!! you are a ROM cook...you are the "uber" user! we should ask you questions
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
vrstu said:
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
Click to expand...
Click to collapse
i think you are right. never thought at this scenario.....
usually i don't buy my pda branded. no plan, no 3 years, free as a bird!
thanks for bringing it to my attention.
yeah, hard-spl to allow you to flash ROMs from other regions..
technically you shouldn't need it to 'protect' your device since its an official ROM upgrade, but then again you're trying to flash an upgrade that's not from your region so not too sure how that affects your warranty.. i would stick with hard-spl no matter what.
Although you may experience better results with certain ROMs using a certain SPL (this hasn't been clearly shown on the diamond to my knowledge) seems like the SPL is more tied to your hardware (why certain people get screen flicker and fuzzy fonts after flashing.. wrong SPL). so it stands to reason if your hardware doesn't change, you *shouldn't* have to change your SPL just cause you're flashing a new ROM
KukurikU said:
1. you don't need hardspl when you want to flash an official ROM.
if you should need one then HTC should release it with the ROM. no such thing!
HTC release official ROM "like it is" for all ppl even for the ones that never heard of hardspl. simple logic.
if you buy it branded look at the next two posts!
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
Click to expand...
Click to collapse
I have experince now with 3 HTC devices: 1. i had Trinity with wwe rom when i bought it-> try to put it to my language (Finnish ROM) didnt work, used hardspl-> it worked
2. Polaris with wwe 6.0 rom, tried to update to the latest wm6.0 rom which was a rom from Singapore, no succes-> put hardspl in device->it worked
3. In my Diamond i put hardspl right away(after 2 hour use), so that one i didnt test at all, based on my previous experience I didnt even try to flash the official 1.93 rom witout hardspl
So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience
[/QUOTE]So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience[/QUOTE]
From my experience from the diamond, you have to flash hardspl onto your handset before you can use 'other region' roms even when it is 'official'.
I have a HK WWE handset and tried to flash my rom with the first upgrade rom from SEA, and it wouldnt flash. it would say my handset is not from the correct region.
i flashed a hard spl afterwards and it worked.
So from pak1234 experience we can make some conclusion? its the same experience I got with Polaris and Trinity
Noob Agony
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
bluntyeyedfool said:
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
Click to expand...
Click to collapse
congrats on yr first successfull step (english language on yr swiss locked diamond)! perseverance and good reading skills pay back.
welcome to our forum!
from yr post i can understand that you started as an intelligent user/member of this forum (as opposed to noob) by using this forum accordingly with it's rules.
there are stupid questions. if one of the next is called by somebody "arrogant response" then he'll have to adjust or just grow elephant skin (i can name a few that already did):
1. "search, this was already posted". (most used)
2. "read the manual." (almost an insult)
3. "read wiki." (friendly, useful advice)
4. "most of the polls are useless." (no comment necessary)
5. "comparisons between any other ppc and diamond does not belong here, this a diamond only forum." (sadly not enough enforced)
a noob is not somebody with a low count of posts. a noob is somebody with a noobish attitude (total disregard of the forum's rules and it's members, wanting everything now, ready, chewed and put in his mouth).
respect the forum and it's members and you'll get respect and help beyond yr wildest dreams.
yr PS only confirm all from the above.
i prefer not to comment yr horses-payback threat
noob here
Hello all, noob here, just got my diamond via vodafone NL.
The device is sim locked contrary to what the agreement with was.
The current rom running on it makes this device incredibly slow, my brother has an p3300 which works way faster than my diamond (but does not look so nice).
This made me start looking for a solution. I've been reading this site for three full days and I'm still very confused, everything and it's contrary is written here, how is one supposed to draw a conclusion?
With that said I would like to see a well written tutorial in plain english and that does not assume the reader is a techie.
It should explain:
- How to backup the original ROM and hardSPL
- How to flash a new rom and avoid issues with screen flickering and so on
- How to restore the original ROM and hardSPL in case the device needs to be send back for repair
- Clarify what to do with radio roms
- How to unlock a device to be used with any sim card (ok this already exists, i've seen the sticky)
Thanks
One more question to be added
- Why would you need a CID and security unlocker?
I thought it was just another name for sim card lock but apparently not.
tnyynt said:
I have no updates in my registered Diamond e-Club account
Click to expand...
Click to collapse
You should go to Support section of their site, that is where they post ROM updates apparently. e-Club has only ringtones.
I am searching for the generic HTC WM6.1 ROM for my Artemis. Can anybody help?
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Great! Thx a lot.
U need more knowledge about PDAs
I am asking for HTC P3350 [Love]
there is many differences in HTC P3300 and P3350...
so read carefully.....then reply
@snggwt you're no OP here, but ok.
If you had used the search, or even google and searched for "P3350 default rom" you would've found this thread, with this download.
I guess that is what you want, isn't it?
Downloading.... plz wait
hi,
thanks a lot...
will try soon..
There is no official release for shipped rom for Love.
That thread is from a rebuild love dump i think, but it's not 100% garantied.
Artemis (P3300) Original WM6 Italian
I've tried to download the wm6 from this link http://wiki.xda-developers.com/index...temis_Upgrades
but the italian file requires a password?!?!
Is the TOMTOM navigator includeded as in the original ROM from factory?!?
Thanks
I have HEMR200 from Swisscom with German laguage. OS 5.1.195 (Build 14955.2.3.0) 1.20.166.4 06/07/06. 1:00 SPL IPL 1.11. I need english language.
I have never installed os on htc and i need help. I searched on this forum, and found some topics but they are very complicated for me. If someone has a simple solution please help me.
This Guide is what you need :
http://www.mrvanx.org/thg/
first "Hard SPL" update, then the other ones
Do read the guide, the wiki, and make sure you have hard spl.
Then the easy thing to do is flash (just run) either the at&t stock rom, or the htc stock rom.
That way you can get the phone up and running. then decide if you want to go for a custom rom.