i've just bought my friends XDA (the 1st one), i was wondering if by any chance i can upgrade it to windows mobile 2003 & remove the PPC 2002 on it?
my only problem with this phone is that it does not have BT & WM2003, but i guess that a software issue??
can it be done.
can someone please give me a link for this...
thanks
hyper said:
i've just bought my friends XDA (the 1st one), i was wondering if by any chance i can upgrade it to windows mobile 2003 & remove the PPC 2002 on it?
my only problem with this phone is that it does not have BT & WM2003, but i guess that a software issue??
can it be done.
can someone please give me a link for this...
thanks
Click to expand...
Click to collapse
Yes you can upgrade to WM2003 but about the BT this is a Hardware issue thus you cannot get an BT SD because it won't work the unit does not support SD/IO.
I recommend from you do not touch the "RSU" leave it as its .
How to upgrade to WM2003 goto http://lumpistefan.dyndns.org and cook your rom
then here's the safest way how to install it to your ppc http://forum.xda-developers.com/viewtopic.php?t=3274
Good Luck.
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
now only if we can get the english orange rom aswell....
BeyondtheTech said:
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Click to expand...
Click to collapse
I am currently using the Jasjar ROM / Extended Rom and the O2 Radio rom. No real issues so far. I am not sure I should try the update of the Qtek 9000 ROM looking at your comments above.
But is in Italian or English? thx
Unit only display "Serial v1.00" after Qtek ROM fl
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Try to reflash again, but this time only use the Radio Rom 1.04.02
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
stanthebiker said:
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/viewtopic.php?t=34552&highlight=
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Hi,
take a look to your pm or look at this:
http://forum.xda-developers.com/viewtopic.php?t=33191
Teja
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
michaelg said:
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
Click to expand...
Click to collapse
That is good news. Please let us know how the ROM of the Qtek performs. Currently I am using the Jasjar rom with the O2 rom. No real issue so far.
michaelg said:
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
Click to expand...
Click to collapse
If you have WinRAR or WinZip installed, right-click on the executable and choose Extract to [folder]...
Then you can throw in the MaUpgradeUt_NoID.exe file in the same folder and run it.
Someone also said you can add a line [CHECKCEID_TYPE]=1 in the RUU.conf file using Notepad, but I don't think it made a difference for me.
Hi,
Actually the last ROM I flashed was the JasJar so I'm back to square one, but I intend to try the QTek again in a couple of days (just need to settle the nerves a bit after the horror of owning an expensive brick for several hours).
In regards to unpacking the .exe files, I stumbled across that trick with WinRAR myself and I was a little surprised myself. That would make upgrading from other sites so much easier especially with access to the NoID installer.
I might try the NoID and the RUU.dll trick to bypass country code to see if both work (if my heart can stand the strain of more repeats of the brick event).
At the moment I've got a prepaid vodaphone SIM (here in Australia) and I'm working on setting that up. I've been advised that full mobile broadband is only available for billing customers so I'll have to wait until I can visit a shop to sign up and try that.
If anyone has the settings already for vodaphone let me know!
Michael
MDA PRO Qtek ROM
at the moment i am using this QTEK rom.
Just upgraded my MDA PRO and now i am using it.
It is one of the best roms because no programs/logos of O2 / T-Mobile etc. And it runs very fast, dialskin is normal windows (not the one of O2)
I am very happy with it at the moment,
only thing i want is an sim unlock tool so i can use my vodafone sim in the phone!
I AM IN HELL PLEASE HELP!!
Hey guys.
please be gentle with me . . ok so i got the rom . . .
tried to do the upgrade - the damn thing is stuck on the splash screen and will NOT progress
just shows
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
Now I got the ma upgrade no id thing - but cannot use the bloody thing now!!!
please help, if my mrs finds out she will chew me up!
pleeeaaassseee help!!!
cheers
lr
RADIO v1.03.00 required!!
Hi!
Can somebody extract the QTEK 9000 shipped RADIO v1.03.00 out and post here?
The reason being if after upgrading to the RADIO (from Dopod 900) v1.04.02 and finding it unsuitable later on I would like to re-flash it with the original shipped RADIO.
Thanks
http://www.beyondthetech.com/downloads/phone/upgrades/
I put the JASJAR, QTEK, and XDA EXEC Upgrade Utilities there. Just download the one you want, right-click and extract the files with WinZip or WinRAR...
I'm stuck pon the accursed splash screen - tho i can get bootloader up .. any ideas what i can do?
RE
Hi BeyondtheTech
Thanks.
One question. How to flash the RADIO only?
Thanks again
Hey Guys,
I don't know if any of you gurus would find a moment to help me out... But I got an spv m5000 (orange's Universal) but just the phone and a usb cable. No software, earpiece etc. NOW, I'd like to put on the qtek9000 pocketpc software, is this available for free? Is this what you guys call a ROM? Basically, I wanna know if its safe to delete its present OS and try and install the qtek one... AND how do you do it...? Thanks a bunch! Lastly, is there a free voice recorder app?? Orange's doesn't come with one... so does the qtek come with one?
THANKS A BUNCH,
N. Madden
I think you shoud read this first, because it's a lot to explain:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
welcome among us!
Hey the link has been great, but I'm still confused as to if its safe to try and flash the qtek rom.... not having any backup software...?
you may try to back-up your contacts and appointments to pc with activesync and then reinstall the rom and start from the scratch with new software or you may try a back-up software like sprite back-up or spb back-up...
I have updated my ROM many times without problems, but I have read most of the topics about it before doing that operation for the first time.
I'll suggest to try Helmi's or Indra's AKU 3.3 ROM with radio 1.13.00 or 1.14.10
Cheers!
I have been looking to various threads about how Blackberry Connect 4.0 and it is being picky on device and rom versions.
I noticed there is a Blackberry Connect 4.0 download available from Dopodasia.com site for D810. Has anyone tried this on a WM6 P3600?
Also, if anyone has the files, can you post it somewhere and I can download it? I'd like to try couple of things with them on my unit. I need the specific Blackberry Connect 4.0 client for D810, I already tried the one for Hermes and of course it did not work.
TIA,
PalMop
D810 not working...
Hello
I have already tried this, but no success and I throw it away... :-(
Roman
I was looking for the same information. Please have a look on this :
http://forum.xda-developers.com/showthread.php?t=310328&page=2
Thanks guys. If any of you still has a copy of the cab, I'd like check few things out with it. If so, please email to [email protected] or upload it somewhere and let me know.
Cheers,
PalMop
hi guys, i'm sorry for such a lame thread but i've just installed a new version of WM6 into my BA and now when I put it in the cradle it does not connect to the Pc and says that the USB connection is no longer valid or does not exist, but yesterday with wm2003 it worked.
can any1 help me please?
i installed the WM6 according to the guide here on these pages.
bro i also have the same prb.......
by the way can you send the link from where you download WM6.
thx
solved
problem solved by installing helmi's WM6..so for anyone who have the same problem install WM6 from this forum..it can be found in BA WM6 seciton.