Related
What is it?
about password
I do not know, but have you got the password for it?
Try reading Helmi's recent posts.
Also, use great care in what you download from the ftp. There have been quite a lot of malicious apps (ie wipe harddrive type stuff) on there, undetectable to a virus killer. Use a sandbox or disassemble anything suspicious.
Be careful.
V
What is password ?
Don't know about the password. Don't know if anyone does know it.
havoc99 said:
Don't know about the password. Don't know if anyone does know it.
Click to expand...
Click to collapse
Its an iso CD image. WM5 it says so it is.... any more explanation? I unpacked it but its not of any use to me... its more of use to ROM builders and xda-developers
nuclear said:
Its an iso CD image. WM5 it says so it is.... any more explanation? I unpacked it but its not of any use to me... its more of use to ROM builders and xda-developers
Click to expand...
Click to collapse
So , what's the password to decompress the .rar ?
TofClock said:
So , what's the password to decompress the .rar ?
Click to expand...
Click to collapse
I was told not to tell anyone the password
nuclear said:
I was told not to tell anyone the password
Click to expand...
Click to collapse
Interesting. So much for a shared community of users and developers alike!
havoc99 said:
Interesting. So much for a shared community of users and developers alike!
Click to expand...
Click to collapse
Thats the on going test for new ROM, I guess. There are many on going ROMs that are locked to avoid newbies bricking their phone. Thats for the community's good.
hanmin said:
Thats the on going test for new ROM, I guess. There are many on going ROMs that are locked to avoid newbies bricking their phone. Thats for the community's good.
Click to expand...
Click to collapse
Yup I knew some people would stumble accross the stuff that we upload to the server. Well that stuff is only for internal use.
Everybody, please take a look @ this! I don´t know if it has been posted here anywhere, but.. (well, I don´t keep searching).
Regards
joeskull said:
Everybody, please take a look @ this! I don´t know if it has been posted here anywhere, but.. (well, I don´t keep searching).
Regards
Click to expand...
Click to collapse
Good find Joe, I will test this
joeskull said:
Everybody, please take a look @ this! I don´t know if it has been posted here anywhere, but.. (well, I don´t keep searching).
Regards
Click to expand...
Click to collapse
Yes it has been posted here
http://forum.xda-developers.com/showthread.php?t=586654
Note that the current version is not compatible with Windows Mobile Standard. Version 2.0 will bring compatibility with non touchscreen devices.
link8506 said:
Yes it has been posted here
http://forum.xda-developers.com/showthread.php?t=586654
Note that the current version is not compatible with Windows Mobile Standard. Version 2.0 will bring compatibility with non touchscreen devices.
Click to expand...
Click to collapse
OMG ...great...It didn't work for my excalibur but it is working with my kaiser...
Hi, nice post..
I've tried to install in my C720W, with 3VO.3.00.112509 ROM.
But I could not run this app, there is an error message like this:
An unexpected error has occurred in RemoteAccess2.exe
Could you please help me to solve this problem?
thanks
mettabud said:
Hi, nice post..
I've tried to install in my C720W, with 3VO.3.00.112509 ROM.
But I could not run this app, there is an error message like this:
An unexpected error has occurred in RemoteAccess2.exe
Could you please help me to solve this problem?
thanks
Click to expand...
Click to collapse
Read 2 posts above....
It's been a while that I promised a version of WIFI Remote Access compatible with Windows Mobile Standard.
It's now done with the version 1.7r2 :
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
link8506 said:
It's been a while that I promised a version of WIFI Remote Access compatible with Windows Mobile Standard.
It's now done with the version 1.7r2 :
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
Click to expand...
Click to collapse
Thank you very much, so this version still not compatible with Non-Touchscreen? As U posted before, you mentioned that version 2.0 will be. I'm still correct? Thanks again for your contribution.
gmaniac2008 said:
Thank you very much, so this version still not compatible with Non-Touchscreen? As U posted before, you mentioned that version 2.0 will be. I'm still correct? Thanks again for your contribution.
Click to expand...
Click to collapse
Changelog:
Version 1.7r2 beta2 : (2010/05/26)
-now compatible with Windows Mobile Standard (non-touchscreen devices)
-may also be compatible with any Windows CE device (untested)
Click to expand...
Click to collapse
Thats from his site, so I guess it should be compatible
no luck
It didn't work for me. After installing, I get a crash and the option to exit or see the error message. Too bad I can't cut and paste that error message...
gmaniac2008 said:
Thank you very much, so this version still not compatible with Non-Touchscreen? As U posted before, you mentioned that version 2.0 will be. I'm still correct? Thanks again for your contribution.
Click to expand...
Click to collapse
finally it's been introduced in version 1.7r2 since there will probably never be a 2.0 version...
gpmartinson said:
It didn't work for me. After installing, I get a crash and the option to exit or see the error message. Too bad I can't cut and paste that error message...
Click to expand...
Click to collapse
that's weird
I don't own a Windows Mobile Standard device, but I tested on the emulator and on a friend's device 3 days ago (although I did some very minor changes since then) and it worked.
without the error message, it's gonna be hard for me to debug
gpmartinson said:
It didn't work for me. After installing, I get a crash and the option to exit or see the error message. Too bad I can't cut and paste that error message...
Click to expand...
Click to collapse
I just realized that you probably installed the version 1.0w! (which is very old, but still downloadable from my site)
make sure you have clicked on the appropriate link to download the latest beta version.
I can confirm that it works on windows mobile standard devices!
Hello everybody,
I would like to share with you this working/booting version of android. Because I read many people have trouble, getting the phone work, or problems with looping boot. I putted this together, with the right zimages and rootfs and an working startup.txt. everything is pulled together from this site so the credit goes to the other ones. But I think it is nice to have an zipped build of android 2.1 ready to go for Topaz!
http://www.megaupload.com/?d=NRXPN3FV
The version is without sense.
Extract the rar to an empty sd card and run haret!
Have Fun!
How is this different from any of the other builds on this site?!?
To the untrained eye it would appear that the ones that are located in the (obviously) main thread are somehow broken or not working... People have issues, we do our best to help them hash it out. Threads like this are just going to create more confusion.
because it's copy and play, usefull for members who don't understand how to compile everything together, this is an good build, even usb works!
Unclassified said:
because it's copy and play, usefull for members who don't understand how to compile everything together, this is an good build, even usb works!
Click to expand...
Click to collapse
A) What are you talking about USB works?!? Are you saying that YOUR build has things that work in it that other builds do not?
B) The others are "copy and play" as well... I haven't compiled a kernel in months, but I still get updated packages. Just copy them to the SD... how is yours easier again?
that was what i was saying indeed, things work what on other builds does not, but enough i understand you don't want it
Unclassified said:
that was what i was saying indeed, things work what on other builds does not, but enough i understand you don't want it
Click to expand...
Click to collapse
Somehow I doubt it. So what works in your build that doesn't in the main builds? Mods, can we please delete this thread entirely?
Unclassified said:
that was what i was saying indeed, things work what on other builds does not, but enough i understand you don't want it
Click to expand...
Click to collapse
How are you having USB working? afaik the system is read only. And you can't mount USB as Android is being run on it.
Be abit more specifigc about which USB functionality you are referring to
This forum is for the Raphael, not the Topaz. Stop wasting everyone's time.
babijoee said:
How are you having USB working? afaik the system is read only. And you can't mount USB as Android is being run on it.
Be abit more specifigc about which USB functionality you are referring to
Click to expand...
Click to collapse
you can use your sd card as an diskdrive so you can add or delete files without having to boot to winmo
i didn't know i was posting in the wrong section, sorry please move to topaz android
regards
thank you for your work
thank you for trying tho
Just wondering if anyone was working on getting this ported to our phones? Works on the Desire and few others via this thread:
http://forum.xda-developers.com/showthread.php?t=772795
They also have our phone on the wiki as showing in progress.
http://psfreedom.com/wiki/index.php?title=Device_compatibility_list
It's listed even two times! They have to make up their minds about the used usb controller though *fg*.
I wonder who is actually working on it? I have watched the thread all day.. I see its listed, but no proof of anyone actually working on it. I guess it just listed because of the usb controller it uses is compatible..
Anyone know what may be different between our diamonds and the HD2? They have it running on the HD2 now
http://forum.xda-developers.com/showthread.php?t=777120
Please someone, help us !
mysticg said:
Anyone know what may be different between our diamonds and the HD2? They have it running on the HD2 now
http://forum.xda-developers.com/showthread.php?t=777120
Click to expand...
Click to collapse
I hope that the problem is only to recompile the code for the Diamond hardware...
(also on Diamond we can run haret.exe)
It´s Done
PSFreedom Diamond port is READY!!!!
http://wiki.psfreedom.com/wiki/HTC_Raphael
Thanks to developers who make it possible.
Let´s try it...
The link it' s wrong
Denial84 said:
The link it' s wrong
Click to expand...
Click to collapse
Try later... the link is correct...
Trying now. If this works, I can finally return my TI 84 calc.
After following the guide and getting android installed i get the following error trying to insert the module "insmod: can't insert 'psfreedom.ko': invalid module format".
im using the newest xdandroid i could find here on a diamond100
actually dmesg returns "psfreedom: version magic '2.6.27.46-01162-g741ab49-dirty preempt mod_unload ARMv6 ' should be '2.6.27.46-01130-g0ac6681 preempt mod_unload ARMv6'"
nevermind... apparently i missed an important step
OK
I tested on my Diamond.
It's ok for me.
Now I'm tested the fixed version with backupmanager.
I'll update soon.
NB
The first boot is very slooooooow.
I have install and run Psfreedom on my old Diamond GSM.
I dont have PS3 right now.
But it looks like working cos.... when I type "insmod psfreedom.ko" and press enter I have next line "#" no any errors and messages.
And at that moment my PC recognize "Unknow USB device". So I think that something is emulating on my Diamond.
One more thing!
When I copy file "modules-2.6.27.46-01162-g741ab49-dirty.tar" to SD
I have renamed it to "modules-2.6.27.46-01162-g741ab49.tar" and replace existed old one.
I have XDAndroid 2.2 (rel 1.6) no any updates.
forum.xda-developers.com/showthread.php?t=732362
So you can try! )))
bastardociccio said:
I tested on my Diamond.
It's ok for me.
Now I'm tested the fixed version with backupmanager.
I'll update soon.
NB
The first boot is very slooooooow.
Click to expand...
Click to collapse
the fixed version? Where??? O_O
Di1Ly said:
One more thing!
When I copy file "modules-2.6.27.46-01162-g741ab49-dirty.tar" to SD
I have renamed it to "modules-2.6.27.46-01162-g741ab49.tar" and replace existed old one.
Click to expand...
Click to collapse
I didn't do that... but PSFredoom works well
I have to rename the modules?
Denial84 said:
the fixed version? Where??? O_O
Click to expand...
Click to collapse
I modified the psfreedom.ko by myself
Is very simple with an HEX Editor.
terminal say me invalid module format when i try to load module .ko
bastardociccio said:
I didn't do that... but PSFredoom works well
I have to rename the modules?
Click to expand...
Click to collapse
Did U check it on PS3????
I dunno but installation step need to replace zImage/modules.
So I think to rename and replace it.
Di1Ly said:
Did U check it on PS3????
I dunno but installation step need to replace zImage/modules.
So I think to rename and replace it.
Click to expand...
Click to collapse
like I said it work well (with PS3 of course)
Now I'm testing the fixed version.
bastardociccio said:
like I said it work well (with PS3 of course)
Now I'm testing the fixed version.
Click to expand...
Click to collapse
right now work XD when i insert module nothing happen it's normal? :|
two problems...
why i must connect usb to pc when i start haret?
i have cryogen 6 installed it's a problem?
Hi developers,
i have a big question:
I read some time ago, that it is possible to install android on NAND of the HD2.
My question is : is it possible to install it on the NAND on the Touch Pro?
Because it is really slow, if i run android over MicroSD card, and it would be awsome ,when android runs faster.
Best regards,
BikerBoy030
At the moment (and to my knowledge) the answer to your question is no. User e334 tried but failed and bricked his phone. You can read more about his attempt in THIS thread. He was attempting to find out a few values that are apparently required but he did leave a few hints of his findings in that thread.
By the way, what version or build (neopeek-variants or xdandroid) are you using and have you updated everything to reflect the latest that is out and relevant.
brick !!! too sad
So, is this the end of hope for NAND on touch pro ???
pls somebody told me !!!
For now, yes :enter sadface of choice here: However, the xdandroid dev team are steadily working at improving stability and adding features some doubted at first; such as camera which is, in testing phase atm. The only thing I can say is that, "it ain't over till it's over!"
n-Joie! (Enjoy)
BikerBoy030 said:
I read some time ago, that it is possible to install android on NAND of the HD2.
My question is : is it possible to install it on the NAND on the Touch Pro?
Because it is really slow, if i run android over MicroSD card, and it would be awsome ,when android runs faster.
Click to expand...
Click to collapse
Just FYI, NAND will not provide any improvements in speed. The optimizations really need to happen in the system, moving to NAND will not solve those problems.
The HD2 guys had a ridiculously complete port of Android when they were still on Haret. We're still not near that stage.
They have it easy, they just rip builds from Desire, etc...
thanks for the fast answer:
that is really sad, that he briked his phone....this is such a sweet phone
I used xandroid, updatet all and could use all programms etc.
But it wasn't smooth...it stocks a bit at all,what it did.
It feels like it used a "bullet-time-mode"
Maybe it would be enought if i willl overclock it to 710 mhz this COULD be enought, but i didn't tested it.
Wich version is more smooth: neopeek or xandroid?
Regards:
bikerboy030
To my knowledge, OC'ing will not help stability. If anything it will make it more unstable. Neopeek builds seem smoother but requires more setup time upfront (multi-partitions and what not). XDAndroid builds may seem rocky at first but are much quicker to setup and it has a nice plug-n-play feel.
n-Joie! (Enjoy)
i had no problems with the stability, it was only too slow.
than i will try neopeek, maybe it feels better.
the problem is: a good friend owns a desire z, overclocked to 1400mhz...that is smooth.....
but if the touch pro works smooth, it would be fine
Well, i can be totally honest to say as far as speed, that XDA android runs quicker then WM does even on my touch pro. I am running wm6.5.5 NRG rom (jan.4), which is pretty zippy to a month ago version of 6.5.5, noticably, but android is actually visually faster. Now that camera is working fine, battery i get around 7-8 hours with little less then normal usage, and would honestly use it SOLELY if it didn't randomly drop data and needed a reset to fix (which i usually just stay in WM when it happens.), but ALSO mostly since at work (IT Tech) i use tethering a lot to grab a driver almost daily (our net connection is 'clear' and is a bit worse in speed then my phone. SAD yes.)
Hmm ... I'm one of those people who eagerly await with great versions of NAND. What exactly is needed to it came to Raphael? Of course, I'm not asking for what must have been fixed and asking, I assume that in theory it already is. Let me add that I've read about, whose founder bricked his Raphael.
Bootloader is required.
Corias said:
Bootloader is required.
Click to expand...
Click to collapse
Ok, I'll ask differently. What is needed to create this Bootloader for Raphael?
GoldAngelo said:
Ok, I'll ask differently. What is needed to create this Bootloader for Raphael?
Click to expand...
Click to collapse
Knowledge of how to write a bootloader? What do you mean?
We have one called tinboot that dzo wrote for the vogue guys. That's what the RHOD is using, but A LOT of work needs to be done to get it to work on other devices. It's not even a full NAND flash for the RHOD....
arrrghhh said:
Knowledge of how to write a bootloader? What do you mean?
We have one called tinboot that dzo wrote for the vogue guys. That's what the RHOD is using, but A LOT of work needs to be done to get it to work on other devices. It's not even a full NAND flash for the RHOD....
Click to expand...
Click to collapse
I would like to know what is needed to version NAND and how this process (creating nand and tools that you need, such as the bootloader and other ) should follow you. Of course, theoretically. Perhaps someone from another country would take on this (not everyone knows looks at XDA;-) maybe after the publication of the national forums that someone will take).
GoldAngelo said:
I would like to know what is needed to version NAND and how this process (creating nand and tools that you need, such as the bootloader and other ) should follow you. Of course, theoretically. Perhaps someone from another country would take on this (not everyone knows looks at XDA;-) maybe after the publication of the national forums that someone will take).
Click to expand...
Click to collapse
I'm no dev, so I won't be able to help you out directly. But look up tinboot, and look at what us TP2 guys have for a NAND bootloader thus far.
ACL has a GIT repo for our NAND tree that is publicly available as well.
We started talking about Raph and Diam nand in the Blackstone thread somewhere around here: http://forum.xda-developers.com/showpost.php?p=11051880&postcount=124
I've compiled the kernel for blackstone-nand and will try to flash this onto my diamond tonight or maybe tomorrow. Wish me luck
detlef25 said:
We started talking about Raph and Diam nand in the Blackstone thread somewhere around here: http://forum.xda-developers.com/showpost.php?p=11051880&postcount=124
I've compiled the kernel for blackstone-nand and will try to flash this onto my diamond tonight or maybe tomorrow. Wish me luck
Click to expand...
Click to collapse
I wish you a lot of luck
If you succed please share your values,maybe we can make it to boot ext2 partition bulids
Is 512 MB of Raphael's internal NAND enough for Android?
Corias said:
Is 512 MB of Raphael's internal NAND enough for Android?
Click to expand...
Click to collapse
More than enough, I thing the G1 had like 192 or something.
arrrghhh said:
More than enough, I thing the G1 had like 192 or something.
Click to expand...
Click to collapse
Yeah,a build is about 150 mb