Hi all,
I have installed phm regedit and resco registry editor,
I can modify registry settings except this value (form 0 to 1)
HKLM\System\VoIP\SIP
EnablePort5060 = 0
the phm reg editor says "unable to perform this action"
resco doesnt give any message but it doesnt modify the entry
any ideas, why I cant change this entry?
I already did a hard reset, didnt help.
thanks in advance.
solved it.
I had to install the security configuration manager and change the securty setting.
Hi all,
When I click on a favorite as a file in explorer (windows\favorites), I get Opera open up but in the address bar, I just get a location of the file rather than the web page that the file points to.
Hopefully that makes sense!
Can anyone help with this?
Thanks
Wayne
Come on guys.....
I've found this and if you go down the list and find \urlfile\Shell\Open\Command : REG_SZ it shows the necessary registry entry that is needed to run a url file from explorer and when run this file opens within IE correctly.
There must be a command switch that follows OPERA9.EXE or OPERAL.EXE that interprets the file correctly and opens the web page.
For now I've got it set to open files in to IE. Not great but nearly what I want.
My efforts allow additions. Its a little work but it does work.
GET THE FOLLOWING:
The manila file for the weather is 2330f3c3_manila.
Location: \windows folder on the TP2 phone.
Total Commander (File Manager that runs on the TP2
Location: http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Firefox Browser
Location: http://www.mozilla.com/en-US/firefox/personal.html
SQLite AddOn for Firefox (This is the database editor that runs in Firefox)
Location: https://addons.mozilla.org/en-US/firefox/addon/5817
CeRegEditor
Location: http://ceregeditor.mdsoft.pl/index.php?id=3&lang=en
ACTION:
Install Firefox
Paste the SQLite AddOn Link in the Firefox Address bar and install the add on
Restart Firefox
Install CeRegEditor on your PC.
Download and install Total Commander on your TP2.
This is a CAB file to be copied from your PC to the TP2. After its on your TP2 tap to install.
Run Total Commander from the TP2
Copy 2330f3c3_manila to your SD card.
Connect your TP2 to your PC, let it sync.
Open your PC's Windows Explorer and copy 2330f3c3_manila from your TP2 to your PC.
Right click on 2330f3c3_manila and uncheck the "Read Only". Click ok.
Run Internet Explorer or Firefox and enter the following link: (This will validate the Accuweather location code: "http://www.accuweather.com/world-index-forecast.asp?Partner=accuweather&locCode=NAM|US|NY|NEW YORK|&u=1" You can change the state abreviation NY to yours and the city NEW YORK to yours (IN CAPS)
The code format (in the United States) should look like NAM|US|XX|XXXXXXXXXXX Copy this from the URL.
Run Firefox Browser
Select Tools and click on SQLite Manager.
A separate window will popup. This is SQLite
Click on Tools, then Options. Remove the sqlite in the default file extentions SQLite files.
Click Ok. (That was a one time change to SQLite AddOn.)
Click on Database.
Click on Connect Database
Goto the folder on your PC where 2330f3c3_manila and select it.
Click on Tables () in the left frame
Click on Cities.
Click on the Browse & Search button in the right frame.
Click on "state" twice. This will sort the records in reverse alpha state order.
Find entries for your state and copy the timezone and msid down. You will need these.
Look at the bottom of the right frame and you will see the last record number. Remember it.
Click the Add Record button.
The id (INTEGER) will be then next record number. Mine was 3609
Enter your cityName in plane text.
Remove any spaces or data in region (TEXT)
Enter your two character abreviation for state (TEXT) Example NY
Enter United States in country (Text)
Enter 0 in latitude (REAL). That was a zero.
Enter 0 in longitude (REAL). That was a zero.
Enter your accuweatherCode: i.e. NAM|US|NY|NEW YORK
Enter the timezone(INTERGER) you copied for your nearest city where you live.
Enter the msid(INTEGER) you copied for your nearest city where you live.
Click Ok.
Find your entry and examine it.
If you see NULL in any fields then double click the record and remove the NULLs and click OK to save.
Repeat for any other cities you want to add and increment id(INTEGER) by one each time.
When you are done: Click Database and then click Close Database.
Using Windows Explorer:
Right click 2330f3c3_manila and select properties and check "Read Only"
Delete the 2330f3c3_manila from the TP2 SD Card
Copy the 2330f3c3_manila you modified from your PC to the TP2.
Using Total Commander:
Goto the SD card tap & hold 2330f3c3_manila till the copy comes up.
Change the folder location to \Windows
Tap on Copy.
Connect the TP2 to your PC. Let it sync.
Run CeRegEditor on your computer in administrative mode.
Click on Connect.
Add a new string value to: HKEY_CURRENT_USER\Software\HTC\Manila
Value Name = "Weather.ServerURLOverride" No quote marks
Value Data = "http://weather.not2advanced.com/htcweather/forecastdata.php?ac=XDADevs&locCode=%25ls&version= 1&device=innovation" No quote marks
Click on Tools then Reset Device.
Now goto your TP2 Weather Tab and Add Location using the new locations.
Good Luck, Jeff
Or you could just make sure 2330f3c3_manila is read only, then install weather database. Add locations and do a soft reset.
Worked for me on Sprint... Maybe I'm missing something extra you're doing though?
I searched different sites and some people had success and others not with what your suggesting. I did what was posted in my quest for getting my location to work. Its' a whole lot of extra work but it does work.
Could you post the link for the DL of the program you're using? Thanks.
You need 3.5 .NET Framework first,
http://rapidshare.com/files/74341832/NETCF_3.5_ppc_ce5.rar
then
Weather Database Editor,
http://forum.xda-developers.com/attachment.php?attachmentid=104045&d=1217922081
At least I recall it being required, not 100%.
LifeStealer said:
You need 3.5 .NET Framework first,
http://rapidshare.com/files/74341832/NETCF_3.5_ppc_ce5.rar
then
Weather Database Editor,
http://forum.xda-developers.com/attachment.php?attachmentid=104045&d=1217922081
At least I recall it being required, not 100%.
Click to expand...
Click to collapse
Weather database editor doesn't work on sprint tp 2 because of file permissions or something like that.
allwires said:
Weather database editor doesn't work on sprint tp 2 because of file permissions or something like that.
Click to expand...
Click to collapse
I've got the T-Mobile TP2, but had the same problem - when first run, the weather database editor couldn't unlock the database.
Here's what I did (very simple...)
a) Connect via ActiveSync, explore (from the PC) to the \Windows folder on the TP2
b) Copy the file 2330fc3c_manilla from the TP2 to the PC (note, the file _2330fc3c_manilla doesn't seem to exist on the T-Mobile device, but isn't needed for changing Cities)
c) On the PC, remove the readonly flag
d) Copy the file back into the Windows folder on the TP2
e) Run Weather Database Editor, add my City, close the editor
f) Soft reset the TP2
g) In Manilla, use the normal method to add the new city to the tab
One thing to note - in step e), you don't have to use the 'weather code' from Accuweather - I found that just making sure I completed the country, state and city fields - and then adding the US zip code as the 'Accu Weather Code' worked great.
I used the WeatherDatabaseEditor 1.2 CAB to install, on a stock US T-Mobile ROM
Hope this helps
-Steve
I had the same problems with Weather Database as well. This is why I went thru the efforts on the start of this post. Having said that, installed the Weather Database again and .net 3.5 compact framework. It didn't work as LifeStealer and thefixer pointed out the manila file was read only. I thank all those for the information and Popdog54 at sprintmogul.net for shedding light on the subject. I will leave my post the way it is as an alternative (lengthy but alternative) way to change/add cities. Again thanks.
Easiest fix for North American Cities
Check out Conflipper's excellent easy fix cabs here-
http://forum.ppcgeeks.com/showthread.php?t=81108
thefixer said:
I've got the T-Mobile TP2, but had the same problem - when first run, the weather database editor couldn't unlock the database.
Here's what I did (very simple...)
a) Connect via ActiveSync, explore (from the PC) to the \Windows folder on the TP2
b) Copy the file 2330fc3c_manilla from the TP2 to the PC (note, the file _2330fc3c_manilla doesn't seem to exist on the T-Mobile device, but isn't needed for changing Cities)
c) On the PC, remove the readonly flag
d) Copy the file back into the Windows folder on the TP2
e) Run Weather Database Editor, add my City, close the editor
f) Soft reset the TP2
g) In Manilla, use the normal method to add the new city to the tab
One thing to note - in step e), you don't have to use the 'weather code' from Accuweather - I found that just making sure I completed the country, state and city fields - and then adding the US zip code as the 'Accu Weather Code' worked great.
I used the WeatherDatabaseEditor 1.2 CAB to install, on a stock US T-Mobile ROM
Hope this helps
-Steve
Click to expand...
Click to collapse
I did this on my Verizon TP2 and it worked great. I used the 'country|state|city' code from AccuWeather rather than zip (didn't try zip).
thefixer said:
I've got the T-Mobile TP2, but had the same problem - when first run, the weather database editor couldn't unlock the database.
Here's what I did (very simple...)
a) Connect via ActiveSync, explore (from the PC) to the \Windows folder on the TP2
b) Copy the file 2330fc3c_manilla from the TP2 to the PC (note, the file _2330fc3c_manilla doesn't seem to exist on the T-Mobile device, but isn't needed for changing Cities)
c) On the PC, remove the readonly flag
d) Copy the file back into the Windows folder on the TP2
e) Run Weather Database Editor, add my City, close the editor
f) Soft reset the TP2
g) In Manilla, use the normal method to add the new city to the tab
One thing to note - in step e), you don't have to use the 'weather code' from Accuweather - I found that just making sure I completed the country, state and city fields - and then adding the US zip code as the 'Accu Weather Code' worked great.
I used the WeatherDatabaseEditor 1.2 CAB to install, on a stock US T-Mobile ROM
Hope this helps
-Steve
Click to expand...
Click to collapse
I just tried this method as well, also on a Verizon TP2, but I'm unable to save back the modified (read only removed) file to \Windows. I get the error: "Cannot copy 2300fcc_manila: Access is denied. Make sure your mobile device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type"
Any thoughts?
I'm on sprint so... obviously sprint made a special TP2 just for me.
Oh wait thats not it.
If its read only then make it not read only. Simple I didn't even transfer over, I just copied from folder to SD -> removed flag -> pasted back on top of the old one.
*shrug*
You can always shut down TF3D if you want.
thefixer said:
I've got the T-Mobile TP2, but had the same problem - when first run, the weather database editor couldn't unlock the database.
Here's what I did (very simple...)
a) Connect via ActiveSync, explore (from the PC) to the \Windows folder on the TP2
b) Copy the file 2330fc3c_manilla from the TP2 to the PC (note, the file _2330fc3c_manilla doesn't seem to exist on the T-Mobile device, but isn't needed for changing Cities)
c) On the PC, remove the readonly flag
d) Copy the file back into the Windows folder on the TP2
e) Run Weather Database Editor, add my City, close the editor
f) Soft reset the TP2
g) In Manilla, use the normal method to add the new city to the tab
One thing to note - in step e), you don't have to use the 'weather code' from Accuweather - I found that just making sure I completed the country, state and city fields - and then adding the US zip code as the 'Accu Weather Code' worked great.
I used the WeatherDatabaseEditor 1.2 CAB to install, on a stock US T-Mobile ROM
Hope this helps
-Steve
Click to expand...
Click to collapse
works like a charm
NetGoo: disable TF3D before you copy the file
I followed instructions in first post and worked like a charm for USCC phone.
Thanks for the help!
I have a Touch Pro2 with WM 6.5 installed.
I have two programs (so far) that I have installed which need the 'owner name' to be completed in order to able to register them (Resco Explorer 2008 and Fitaly). However, while with my WM 6.0 device, I could perform the action under Settings --> Personal --> Owner Information, on my new device, the option is missing from the Personal tab.
Is this going to be registery 'hack' - if so, please would someone tell me how to do it?
Got it!
Found it through Googling on this very site (unfortunately, I can't make the Search function here work the way I think).
Just in case anyone else has the same problem, the link is http://forum.xda-developers.com/showpost.php?p=4830384&postcount=126
Go Here HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide
and set Value to 0
Hey guys,
I want to remap the IE button to let it start CeleTask, does anyone know how to do it?
Now I know - there is a PIE.lnk file in the windows folder.
And there is also something in the registry, I searched for iexplore.exe and found a key in HKLM named "shell" or something. I deleted this key, this worked in the 6.5 rom but not in the 6.1 rom - the button there seems to be mapped in hardware to the iexplore.exe
So there are 3 solutions:
1. I only change PIE.lnk so PIE and Celetask are both starting
2. I overwrite the iexplorer.exe with Celetask.exe
3. I find all references to iexplore.exe and replace them with ie.exe and rename the exe.
Hopefully number 3 is working - would be the best now as I need Internet Explorer sometimes.