Hi all - i have problem upgrading my Univercal device, i have german device but i whant to use english - try to upgrade my ROM byt I get only "ERROR 120 - Contry ID Error" - is there any way to install english ROM version ?
Download and unpack the ROM update. Place MaUpgradeUt_noID.exe in the directory of the unpacked ROM and run it twice (you'll get an error the first time, but just run MaUpgradeUt_noID.exe again).
Updated mine yesterday.
You can place the files from the "Radio Only" update inside the ROM directory if you want to upgrade your Radio at the same time.
Related
Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!
I appreciate if somebody with Qtek g100 (GPS navigator PDA) can dump the rom and upload it to the ftp..
I need it for changing CHT rom to English.
The way to do it is:
1. push Power+Record +Reset,
2. release reset, wait until screen start with White and than release both other - Power and Record. That will put the PDA in Boot load.
Once in Bootload, run the RomUpdate / Mtty , choosing USB , push Enter to receive the prompt USB>
3. type r2sd while SD is in the slot., the PDA will sump the rom.
4. when completed (back to Prompt). use NTRW by NTRW read p100ENG x:, while x is the drive letter of the SD card.
5. Upload the rom to the FTP.
Dopod p100 More details...
I have the "machine" for few days...
Playing with it , it seems that boot loader is the same as the ipaq 19xx.
I managed to dump the Chinese rom (attached ) using the monitor r2sd command.
When trying to flash it with the English version I get “Invalid ID”, it refuses to accept a flash of English version.
One way to help me is to patch the RUU to ignore country and the other one is to have a dumped of an English version.
I did not apply the procedure of NfbTools.. I do not believe that rom structure is the same as for the XDA.. shall I?
I will upload both files mentioned above to mthe ftp and appreciate help.
I have an I-mate PDA-N, it's my first PDA, but (after 2 months of reading about) now I'm able to do this.
Only one problem... I'm from Italy, and you want a ROM in english, I think
PS: excuse for my english
sasovics said:
OK folks I DIT IT FINALLY!
Use the patched "Upgrade Tool.exe" (attached)
Then download both WWE version WM6 ROM and your current language WM6 ROM (mine was Czech so I dowloaded CSY).
Use a HEX editor and copy the ROM header (range: 00000h - 10000h) from your current lang. ROM and paste (overwrite the header - same range) in WWE ROM. Uplolad the modified ROM onto your SD card along with patched Upgrade Tool and update.dat (this was unchanged) and begin update.
My PDA was Czech and now is English!!! Everything's working like a charm!
Please note, my upgrade was successful, but if you want to try this method, do it on your own risk! I will not take any responsibility in case you damage your device!
Cheers,
sasovics
Click to expand...
Click to collapse
Does anyone tried this and get it successfully done? I got one A639 last week but it is English version. I cann't install too much thing.
i have a blue ASUS screen
i cannot enter windows in asus to make the update.
is anybody knows the way to ulpoad a new ROM to the A639 without entering windows. for ex: from the SD in bootloader, or by USB
thanks for any help!
update: i can maker hard reset - but nothing happens
i can enter to bootloader, and the device recognizes the FAT16 SD, but the upgrade does not start...
i need the rom as BIN file for that. does somebody have it..?
hi all, i am a beginner with windows mobile and i am currently using a Asus P535 windows mobile 6 OS. I bought the set in Hong Kong but unfortunately i forgot that the language cannot be changed back to English. Now i am having a lot of problems with the chinese interface.
Can anyone teach me how to flash to a Malaysian English OS MY ROm or at least an English OS please ? thank you very much.
ROM date 2007/5/24
ROM version V4.7.12 CHT_HK00
Boot version 070416122657
Radio version V.4.7.0
MP version V0.164
Battery version 1.3
Ext ROM version V1.4.3 HK00
as i am a noob i hope u guys can input me with layman's term not pda terms..besides, i only have a USB cable to do it, no other sophisticated gadgets : ( thanks a thousand...
Try this.
Put it in your MiniSD card and execute it.
If it work, flash WWE version then.
vivi
PS. Not my work.I don't know who create this.
i must use an empty mini sd right ?
how do i flash WWE ?sorry i am not experienced in this field and even shops in my town do not provide such a service. I called Asus Malaysia, they are not helpful at all. I even asked if i could go to their service centre and pay for the service, they said no.
what is the worse that could happen if something goes wrong ?
i have run it in my asus p535 ...
it says ROM language ID: 404 (i think it is 404 too fast u couldn't see), now unlocking....
after that noting came out...
i try executing it again ....now it says my ROM language ID:0 , but my ROM is still HK00 , changing it to WWE MY00 is difficult, different region, different language.
does this mean it worked ? how do i continue ? thanks so much
V4.7.12 2007/08/20 update
Description ASUS PDA Phone P535 WM6 firmware V4.7.12_WWE_MS00 only for Malaysia
Additional features and improvements:
1.Microsoft Windows Mobile 6 Update
2.Extended ROM V1.4.0
Caution:
1.Do not upgrade to different language or regional version onto your PDA Phone, or it may cause device OS broken then won''t turn on anymore.
2.It is recommended to format SD card into FAT format.
3.Please also install phone module firmware V4.8.0 or above.
4.After the installation, previous data will not be found.
If your OS version is WM5, please use ActiveSync to synchronize and backup your personal data.
(Please do not use SPB Backup to backup and restore your personal data. This action might cause system malfunction or data missing)
If your OS version is WM6, please use SPB Backup software to Backup your personal Data.
5.Due to compatibility issue, please use ActiveSync version 4.5
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
6.Please make sure battery level is above 60%
7.Please make sure to use SD card with capacity 2G or less for upgrade.
8.Please make sure that there is no other folder named "2577".
If such folder exist, please rename it to a different name then change it back after upgrade.
9.After the installation, please go to "Start"=>"Setting"=>"System" and restore back to default.
10.Please be notified that it cannot be downgraded to Mobile 5 after upgraded to Mobile 6.
Please make sure you acknowledge such limitation and then proceed with the following steps.
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card''s root folder(Under Mini-SD''s root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap; In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535''s expansion slot and wait for firmware to setup automatically.
If the firmware didn''t execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warning: Do not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
File Size 52.94 (MBytes)
i got this from asus website...after run the unlock lang id...am i suppose to follow this ? please guide me ..thanks
ok i have tried it.
when i press system > ROM update
it says ROM update cannot be applied to this region's version!
still nobody to help me ? i have been trying hundreds times and nothing worked out for me...
please, anyone who knows ..teach me how to switch to WWE
thanks
Do you have a *.cap file (official Firmware)? If so, do the following
Download this.
Run "P535RomTool.exe -d6 AsusP535.cap" on command line.
Note 1: AsusP535.cap has to be in the same dir as P535RomTool.exe.
Note 2: If your file has another name, take the right one!
Copy the resulting GalaxyII.nb0 file to a clean SD Card.
Run ASUS.UnlockLangId.exe on your p535.
Perform power+photo+record+reset
Enjoy!
thanks for the romtool but...i cannot even run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
is it because of the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) ??
http://www.microsoft.com/downloads/...D9-AE1A-4A14-984D-389C36F85647&displaylang=en
thanks
P535RomTool not run
Hi,
I have a big problem, i cannot run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
I have installed the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86): http://www.microsoft.com/downloads/d...displaylang=en. I have Windows XP SP2. what I have still to make it to run this tool? Plaese help me!!!
Thanks
create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....
aresavas said:
create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....
Click to expand...
Click to collapse
Thanks a lot buddy. It converted the file into nb0 file and i have downgraded my p535 from wm6.5 to wm6.0 successfully.
Ok,i bought an asus P535 from eBay for a very good price BUT there is a problem.
The language of widows is French.
I can work my way through the menus and use the phone but it is getting frustrating.
Is there a way to change the language into English?
PS.Please respond only if you know a way to do this,i can speculate for myself.
LeoXTR said:
Ok,i bought an asus P535 from eBay for a very good price BUT there is a problem.
The language of widows is French.
I can work my way through the menus and use the phone but it is getting frustrating.
Is there a way to change the language into English?
PS.Please respond only if you know a way to do this,i can speculate for myself.
Click to expand...
Click to collapse
Welcome
If Start-settings-system-regional settings does not work try to reflash to another ROM in WWE
Good luck,
Success!!!
Ok,this is to anyone facing a similar problem:
USE THIS ONLY IF YOU ARE WELL EXPERIENCED WITH BIOS/FIRMWARE FLASHING AND ALWAYS AT YOUR OWN RISK.IF YOU DO SOMETHING WRONG AT THE FOLLOWING PROCEDURE YOU WILL MOST LIKELY RENDER YOUR PHONE USELESS.
Step 1:
go here: http://forum.xda-developers.com/showthread.php?t=295778&highlight=p535+language&page=3
and download the p535 ROM tools
Step 2:
go to www.asus.com -> downloads,select the device and select window mobile as OS.
Then select the ROM with the language you wont to install.(in my case the V4315_WWE_MS00.rar Malaysian-only version with English language)
Step 3:
Extract both the zip files from the ASUS official ROM and the P535 ROM tools.
Step 4:
In the folder of the ASUS ROM there is a folder named "2577".Inside there is the file Autorun.exe
Replace that file with the Autorun.exe from the P535 ROM tools,and also add the "ASUS.UnlockLangID.exe" from the P535 ROM tools into the 2577 folder.
Step 5:
In the folder of the ASUS ROM there is also a file named "GALAXY.cap"
Make a copy of that file in the same location but ame it "GalaxyII.cap"
PS.In my case i also had to add in here the file "AsusP535.cap",which i found it in the UK-only version of ROM available for download from asus.
Step 6:
Format a 2GB mini-SD card with FAT-32 system and copy into it ALL the stuff in the ASUS ROM folder(1-the folder named"2577" with the Autorun and ASUS.UnlockLangID in it and 2-the files "GALAXY.cap","GalaxyII.cap") (and "AsusP535.cap",in case the phone shows an error"AsusP535.cap missing" BEFORE it starts the ROM upgrade process)
Step 7:
Insert the mini-sd card into the top-slot of the P535 and when the phone displays a message about running Autorun.exe select >NO<
Step 8:
Using the phone's file explorer go in the mem.card and run FIRST "ASUS.UnlockLangID.exe" and THEN "Autorun.exe".
The phone will request you to connect it to a power source and after you do that it will ask you if you want to upgrade the ROM.
Select YES ad everything is done automatically.The Phone will download the new ROM from the mem.card and install it.
PS.
I have destroyed 2 mp3 players in failed firmware flashing attempts,so my lesson learned is this:
DON'T,NO MATTER WHAT disconnect,remove battery,reset,shut down
the phone during the upgrade process,or you will kill your phone.